Public Works Department Tender

Vol-III, P.No-43, I.No-5.31 - Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight of mix and filler, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per MoRTH V revision. ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

Vol-III, P.No-17, I.No-3.6 - Construction of Subgrade and Earthen Shoulders: Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 PWD SR 2023-24 Vol 3 Item No 3.6 ( Page No 17 ) Construction of sub-grade and earthen shoulders with approved material ( CBR min 10 %) obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

Vol-III, P.No-67, I.No-8.15 - Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface, Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35:2015.The finished surface to be level, uniform and free from streaks and holes. ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

Vol-III, P.No-74, I.No-8.43 - Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 cm2 on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer. The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

Vol-III, P.No-64, I.No-8.6(ii) - Retro-Reflectorised Traffic Signs Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 3mm/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over the back support frame of min 25 x 25 x 3mm angle mounted on a mild steel circular pipe 65 NB, 3.2mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.The sign shall be maintained as per section 12 of IRC:67:2022. (ii)90 cm equilateral triangle ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

Vol-III, P.No-65, I.No-8.8 - Direction and Place Identification Signs with size more than 0.9 m2 size Board. Providing and erecting direction and place identification retroreflectorised sign as per IRC:67:2022 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4mm with area exceeding 0.9 m2 fixed over back support frame of min 40 x 40 x 5mm angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level asper approved drawing. ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

Vol-III, P.No-67, I.No-8.16 (ii) - Kilometre Stone. Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc. (ii) Ordinary kilometer stone (precast) ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.

Vol-III, P.No-67, I.No-8.16 (iii) - Kilometre Stone. Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc. (iii) 200 m stone (precast) ---- INCLUDING COST OF ALL MATERIALS, WITH ALL LEAD AND LIFT, TRANSPORTING TO SITE, LOADING AND UNLOADING, LABOUR CHARGES, HOM, ETC COMPLETE AS PER SPECIFICATIONS AND AS PER DIRECTIONS OF ENGINEER-IN-CHARGE OF WORK.