Public Works Department Tender

Vol-II I No. 20.50 Page No. 203 - Removing white wash or colour wash by steel brushing and / or scraping, sand papering and preparing wall surface smooth including repairs to scraches including cost of labour, material complete as per specifications.

Vol-II I No. 8.25 Page No. 45 - Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

Vol-II I No. 8.28 Page No. 45 - Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

Vol-II I No. 8.41 Page No. 48 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

Vol-II I No. 8.33.3 Page No. 47 - Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

Vol-II I No. 11.36.2 Page No. 89 - Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge: Pre-laminated particle board with decorative lamination on both sides including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.

Vol-II I No. 11.37.2 Page No. 89 - Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/m²) including cost of materials, labour, usage charges of machinery complete as per specifications.

Vol-III I No. 8.54 Page No. 78 - Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge & MoRTH specification 804

Vol-II I No. 7.1.1 Page No. 21 - Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge. 0.63 mm thick with zinc coating not less than 275 g/ m²

Vol-II I No. 11.11.2 Page No. 80 - Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.

Vol-II I no. 22.51 Page No. 221 - Providing & supplying Toilet cleaner of reputed make capable of killing bacteria, germs as per direction of Engineer in charge of work

Vol-II I No. 13.31.1 Page No. 122 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 15 mm nominal dia Pipes

Vol-II I No. 14.7.1 Page No. 132 - Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Vol-II I No. 14.3.1 Page No. 131 - Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Vol-II I No. 14.1.1 Page No. 131 - Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Vol-VI I No. 1.2.1 Page No. 2 - SupplyingheavygaugePVCconduitpipe.mmdia.mmthickconfirmingtoIS2509withsuitablesizebends,metal/PVCJunctionboxes,adhesivepasteetc.,andrunningbeforeconcretingtheslab.TheconduitshouldbetiedtothereinforcementrodsbyusingbindingwiresandunusedwaysofjunctionboxesandpipeendsshouldbecoveredusingPVCendenclosures,runwith18SWGGIfishwirewherever necessary 19/20 mm dia 2 mm thick

Vol-VI I No. 2.3.2 Page No. 5 - Wiringforlighting/powercircuitusingoneofFRLSPVCinsulated1100Vgrade,multistrandcopperwirewithlowconductorresistancesinglecoreinopenorconcealedsystemofwiringwithspecifiedIS-694:2010 1.5 mm2

Vol-VI I No. 2.3.3 Page No. 5 - Wiringforlighting/powercircuitusingoneofFRLSPVCinsulated1100Vgrade,multistrandcopperwirewithlowconductorresistancesinglecoreinopenorconcealedsystemofwiringwithspecifiedIS-694:2010 2.5 mm2

Vol-VI I No. 1.6.1 Page No. 3 - Supplyingandflushmountingteakwoodenboxwithoutfrontplank,madeofnotlessthan12mmthickwood,afterduegroovecutting,finishing with necessary cement plastering complete. 12" x 12" x 3" (300 x 300 x 76 mm)

Vol-VI I No. 3.1.1 Page No. 8 - Supplying6Aflushtypesocketand6AflushtypeSPswitcheithersurface/flushmountinginexistinggangboxorin4mmthickplasticsheetandfixingoveraflushmountedwoodenboxandwiringusingnecessary capacity wires as required as per IS 1293 and IS 3854 6A 2 Way

Vol-VI I No. 6.8.1 Page No. 31 - Supplyingof.TRInvertortypesplitAirconditionerssuitableforoperationonA/Csupplysinglephase50Hz230Vwithhermeticallysealedinvertercompressorwithaircooledcondenser,latestR410A/R-32refrigerantfanmotor,start&runcapacitors,relay&overloadprotectorinternalunit,withoneindoor&oneoutdoorunitThecondenserunitwillbeplacedoutsidetheroomavoidnoiseincludingstandardlengthofsuitablesizecoppertubingcoveredwithnitrilerubberinsulationtube.suitablecapacity3coresheathed/PVCcopper cable and a battery operated wireless remote unit. 3 star 1 Ton capacity

Vol-VI I No. 6.5.2 Page No. 30 - Supplyingwallmountingfansuitabletooperateatsingle-phase230v AC. supply. 400 mm Sweep

Vol-VI I No. 11.8.3 Page No. 46 - SupplyofLEDStreetlightluminairewithpressurediecastaluminiumhousingbodyforoptimalthermaldissipation.LampcompartmentcomprisingofantiglarecleardiffuserwithInjectionmouldedpolycarbonatematerial,deliveringsuperiorlightoutputRatedlifeBurningHrs50000hr@LumenMaintenanceof70%,maximumlightintensityshouldbebetween60degreesto70degrees.CCTgreater than5500K,IP66opticalandelectricalcompartment&impactresistanceofcompleteluminairegreater thanIK08.PowerFactorgreater than0.9withmains,SurgeProtection-Min5KValongwithOvervoltage/Overload,shortcircuit/miss-wiringprotection.Compatibleforpolemountingwithouterdiaof40mmto50mm.UniversalVoltagedrivertooperatewidevoltagerangefrom100Vto270V50/60Hzapplication.CompliancetoIS10322/IEC60598,LM79&LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with singlescrewtoensureeaseofmaintenanceatthesightsitelocationwithminimizedminimaltools.LEDLightfixturewith.WSystemPowerconsumption.LEDEfficiencygreater than1301m/w,nominalCRIgreater than75.Luminairemanufacturershouldhavein-housefacilityaccreditedbyNABL/CPRI&anyGovernmentcertifiedagency&Design&DevelopmentfacilitycertifiedbyISO9001:2008.Housingwithsupplierwordmark/nameshallbeEngraved/Embossingonthediecasthousing/Bodypart.Warrantyof2YearsagainstanymanufacturingdefectworkingunderstandardelectricalconditionsasmentionedaboveshouldbegivenbyLEDmanufacturer&Cree/Nichia/Lumileds/Osram make LED Source. LED Streetlight 70W

Vol-VI I No. 11.11.6 Page No 47 - Supplying&fixingofretrofittype-LEDbulb.WwithOPALacrylicdiffusercomprisingofLEDsourcewithCCT6500degreeK,CRIgreater than70%.efficacygreater than80lumenperW,lifegreater than25000burninghoursandCompliancetoIS10322/IEC60598,LM79&LM80.TheLEDaredrivenbyHFelectronicdriverintegratedinthesystem,withPFgreater than0.95,powerlossshouldlesser than5%oflampWage.,shortcircuit&opencircuitprotectiontobeintegratedinthecircuit,THDlessthan20%,LifeasperLM79.Theoperatinginputvoltageshouldbebetween130to275V.BISApprovedandTestedbyNABL/CPRIaccreditedlaboratorywith2yearsWarrantyagainstanymanufacturing defect working under standard electrical condition. 15W, 6500K

Vol-VI I No. 9.2.1 Page No. 38 - Supplying,erecting,testing&commissioningofOFF-LINEUPSsystemsuitableforoperationon230V,50Hz,A/Csupply,withallaccessories complete and Excluding batteries and wiring complete. 1 kVA OFF LINE UPS

Vol-VI I No. 12.56 Page No. 54 - Supplying,fixing,wiring,earthelectrodeforgroundingconduits,I.C.cutoutsandotherequipment'sonthemeterboardusing40mmdia2.90mmthickGIpipe2.5mlongburiedinapit.Thepitshouldbefilledwithequalproportionofsaltandcharcoal150mmall-roundthepipetocompletedepth.Theconnectionfromthepipetotheconduitetc.,istobeestablishedthroughGIwireofsizeasperlSIspecification7.3.3.ofIS732using12mmdiabolts,nuts,washersandchecknutsetc., the pipe shall have 16 through holes of 12 mm dia

Gem Rate - NA Computer Table consists of Computer table with key board drawer and table top naR (na) Product Details 1,000.00 90% Trends Price For 1 pieces MRP/Unit: Rs 10,500.00 Offer Price/Unit: RS 1,000.00 Availability: 88 In Stock Min. Qty. Per Consignee: 20 Product id: 5116877-68985008004 Country Of Origin: India Local Content (MII): 100% Please Note: Local Content value is as declared by reseller since OEM is not registered on GeM Seller Details Sold by: Reseller Reseller not verified by OEM Catalogue not verified by OEM 4.5 5.0 Specifications Type of Computer Table Computer table with key board drawer and table top Placing of modesty panel covering full back side of frame end suitably welded with two side members of the from in such a way that it's top surface having 17 mm width,flushes with top surface two side members and joining front angle member Welding of Modesty Panel A modesty panel of size 200 mm X 17 mm X 0.8 mm thick CRC sheet to be welded Welding at top and Back At The Top In Front Side Welded With An Angle Size 17 Mm X 17 Mm X 3 Mm And At The Back On The Top Side Of The Frame Guides Thickness (for drawer) 2 mm thick minimum from mild steel sheet Material of Table Top, Key board and drawer MDF board of Grade SBG II of IS 12406 Latest Thickness of Table Top etc 18 millimeter Lock of Drawer Yes Type of lock 6-lever lock with a set of 2 keys of non corrosive material Material of Modesty Panel CRC sheet conforming to IS:513/Latest Size of Computer Table 10 mm (LXBXH) 1000 Mm X 600 Mm X 750 Mm Size of Printer Table 10 mm (LXBXH) 750 mm X 750 mm X 750 mm Size of Computer Cum Printer Table 10 mm (LXBXH) 1200 mm X 750 mm X 750 mm Outside Drawer Size (L X B X H) 5 mm 225 mm X 500 mm X 100 mm provided on top right side of the table with ball bearing Size of key board tray 5 mm 600 mm (front width) X 500 mm (depth) provided with end fitting made from 2 mm thick MS steel mounted on either side Size of Modesty panel 200 mm X 17 mm X (0.8 mm thick) Primer for coating on M S parts Redoxide Warranty period in number of years 2

Gem Rate - Acer Intel Core i5 12400 8 GB/ 0 GB HDD/ Windows 11 Professional acerR (Veriton X4690G) Product Details Rs 9,000.00 92% Trends Price For : 1 pieces MRP/Unit: RS 110,000.00 Offer Price/Unit: RS 9,000.00 Availability: 2 In Stock Min. Qty. Per Consignee: 2 Product id: 5116877-27300340923 Country Of Origin: India Local Content (MII): 51% Seller Details Sold by: Resellers OEM verified Reseller OEM verified catalogue 4.5-5.0 Specifications Processor Make Intel Processor Generation 12 Number of Cores per Processor 6 Processor Description Intel Core i5 Processor Number Intel Core i5 12400 Chipset Series Intel B Series Chipset Number Intel B660 Operating System (Factory Pre-Loaded) Windows 11 Professional RAM Size (GB) 8 RAM Expandability up to( using spare DIMM Slots in GB) 64 Type of Drives used to populate the Internal Bays HDD ,SSD Total HDD Capacity (GB) 0 Total SSD Capacity (GB) 512 Total SSHD Capacity in addition to 8 GB Flash (GB) 0 Cabinet Form Factor SFF ( 7 to 13 Litres) Monitor Technology IPS LED Backlit Monitor Size (INCHES) 21.5 Monitor Resolution (PIXELS) 1920x1080 On Site OEM Warranty (Year) 3

Gem Rate - HP Laser Mono Computer Printers for A4 paper size hpR (HP LaserJet Tank 1020w Printer with 5 years warranty) Product Details Rs12,000.00 60% Trends Price For : 1 pieces MRP/Unit: Rs30,336.00 Offer Price/Unit: Rs12,000.00 Availability: 13 In Stock Min. Qty. Per Consignee: 1 Product id: 5116877-94493184458 Country Of Origin: Vietnam Certification: BIS Certification Seller Details Sold by: Resellers OEM verified Reseller OEM verified catalogue 4.5 - 5.0 Specifications Cartridge Technology separate toner and drum Printing Technology Laser Type of Printing Mono Paper Size A4 Print Speed per minute as per ISO/IEC 24734 in (A4) Size - Mono 22 Print Speed per minute as per ISO/IEC 24734 in (A4) - Color 0 Duplexing Feature No Wireless Connectivity Yes Number of Main Paper Trays 1 By pass Tray Facility No On site OEM warranty (Years) 5

Gem Rae - KRISHTHA Revolving Chair with Knee tilt mechanism KRISHTHAR (BTC-RK) Product Details Rs2,000.00 60% Trends Price For : 1 pieces MRP/Unit: Rs5,000.00 Offer rice/Unit: Rs2,000.00 Availability: 345 In Stock Min. Qty. Per Consignee: 10 Product id: 5116877-65795583392 Country Of Origin: India Local Content (MII): 100% Seller Details Sold by: Resellers OEM verified Reseller OEM verified catalogue 4.0 4.49 Specifications Type of chair Mid Back Tilt mechanism Knee tilt mechanism Locking mechanism Upright locking Seat depth adjustment Fixed type Revolving mechanism Designed with 360 degree-revolving type Pedestal base Mild steel chrome plated Minimum thickness (in mm) of MS Plate Joining the backrest with seat of the chair 2 millimeter Seat material PU foam Density of PU used in seat (kg per cubic meter) leesser than or equal to 30 Thickness of PU used in seat (mm) greater than 30 less than or equal to 40 Minimum seat height from floor surface (mm) less than or equal to 400 Width of seat (mm) greater than 400 less than or eqaul to 450 Depth of seat (mm) greater than 400 lesser than or equal to 450 Seat upholstery material Polyester fabric Backrest type Fixed type Backrest height Fixed Backrest support type Contoured back / Without lumber support Backrest base frame material Injection moulded plastic Density of PU used in backrest (kg per cubic meter) NA Thickness of PU used in backrest (mm) NA Width of backrest (mm) greater than 400 lesser than or equal to 450 Backrest height from the seat level lesser than 450lesser than or equal to 550 Backrest upholstery material Mesh fabrics Armrest type and arm movement Fixed Warranty period in number of years 1 year

Gem Rate - Unbranded Plastic Moulded Chair With Arms Without Cushion Single Piece Plastic Moulded NA (PVC Seat/Back FD/MP/II/06 455X455x4mm) Product Details Rs199.00 72% Trends Price For : 1 pieces MRP/Unit: Rs699.00 Offer Price/Unit: Rs199.00 Availability: 300 In Stock Min. Qty. Per Consignee: 100 Product id: 5116877-65683755711Country Of Origin: India Local Content (MII): Not Declared Seller Details Sold by: Resellers Reseller not verified by OEM Catalogue not verified by OEM 4.5 - 5.0 Specifications Type of Chair Single Piece Plastic Moulded Seat Cushion Without Back Cushion Without Plastic Material PVC (Polyvinyl Chloride) Arms With Arms Seat Width in mm (+/- 5 mm) 455 Seat Depth in mm (+/- 5 mm) 450 Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) No Cushion Density of PU Foam in KG per Cum No Cushion GSM/Thickness of Fabric (Gram per Sq Meter) NA Thickness of Polyurethane Foam Used in Backrest in mm (+/- 2 mm) No Cushion Support/Under Structure Single Moulded Piece No Support Structure Support Structure Finishing Sigle Moulded Piece No Support Structure Warranty Period in Number of Years

Gem Rate - LUMINOUS Acrylonitrile butadiene styrene (ABS) Stationary Valve Regulated Lead Acid Batteries of 12 Volt LUMINOUSR (Battery 150 Ah - RC18000) Product Details Rs600.00 97 % Trends Price For : 1 pieces MRP/Unit: Rs20,000.00 Offer Price/ Unit: Rs600.00 Availability: 10 In Stock Min. Qty. Per Consignee: 1 Product id: 5116877-5060058994 Country Of Origin: India Local Content (MII): 52% *Please Note: Local Content value is as declared by reseller since OEM is not registered on GeM Seller Details Sold by: Resellers Reseller not verified by OEM Catalogue not verified by OEM 4.5 - 5.0 Specifications ISI Marked No Battery Voltage 12 Volt Battery Capacity (in Ah) at 10 H Rate 150 Ah Material of Container Acrylonitrile butadiene styrene (ABS) Number of cells per battery 6 Cells for 12 Volt Battery Method of connections between cells Bolted Warranty (in Years) 1 Year