Public Works Department Tender

22.24 - Providing & fixing 100% Polyester Curtains with specification of regular wash as per direction of Engineer in charge

22.20 - Providing & fixing of Tea table 900mm x 750mm 450mm with 12mm thick ethched tempered Glass with bevelled drawing made out of BWP ply and out faces laminated with 4mm thick veneer or 1mm thick laminate

22.37 - Providing and supplying single size 6ft x 2.5ft soft pU foam 5 inch thick mattress of reputed make with better enhanced air circulation & breathability & sleeping comfort of size as per direction of engineer in charge

22.23 - Providing & fixing vertical blinds of reputed make of shape 100mm regular fabric with powder coated aluminium channel, telting with PVC Chain system with all necessary fittings and fixtures as per direction of Engineer in charge

22.6 - Providing and supplying 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand bo xes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-in-charge. Note: For items (1) to (7) Minor fittings are included in price & Major Fittings to be paid separately. The cost is excluding cost of Labour & installation charges)

22.8 - Labour & installation charges for BWP ply:BWR ply:HDHMR: MDF & Particle board work of any thickness applicable for all types of work

22.15.1 - Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Handles 200mm

22.11 - Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge.

20.35 - Providing and fixing 85x42 mm chromium plated brass pull bolt lock with necessary chromium plated brass screws, nuts, bolts and washers etc. complete.

001 - Wooden Flooring: Providing and laying of engineering wooden polished flooring of 12 mm-14mm thick, high density timber of approved colour and design with end trims, transition, profiles, beading, 15mm thick felt, and 20 micron polyester film with 4 mm thick foam underlay etc., complete.(DR SE Ltr No.559 Dated: 21.06.2021 Sl No 21)

002 - Providing, fabricating and fixing wooden partition frame work consisting of 50mm x 50mm sal wood frame work at spacing not exceeding 600mm c/c fixed to the bottom and wall surface, the partition shall be skinned on both sides using 12 mm thick commercial plywood of approved brand termite proof and water resistance, and top covered with 4 mm thick approved quality veneer glass panel of 5.5 mm thick plane glass fixed in 10 mm thick wooden beading at top partition 0.3mm depth finishing,complete including cost and conveyance of all materials, labour for all items of work, HOM of equipment complete as per the directions of the engineer incharge of the work. (ADR, l no-632, date-24/06/2021, sl no-1)

004 - Providing and supplying contemporary style pinnacle executive high back chair,black colour mesh and fabrics ,height adjustment with chrome steel base along with twin castor wheel gas lift made up of MDI with three way adjustable armrest along with headrest having forwars,backward and height adjustment etc complete ,of approved featherlite /godrej/equivalent make including cost of all materials,cost of labours,equipment and machineries and lead and lift,loading and unloading,transportation and all types of statuory taxes and all other incidental charges. etc.,complete(EHS-HAM)(APPROVED RATE SE- NO-559 DATED 21-06-2021) SL no 32

005 - Supplying office chairs with fixed arm of Tycoon leatherette series C-56-2-11 of Featherlite or equivalent make, including the cost of all the materials, labour and transportation, lead and lift etc., and all other incidental charges,etc.,complete as per the direction of the Engineer-in-charge of the work. (APPROVED RATE SE- NO-7154 DATED 11-01-2016) sl no 12

006 - Supplying and providing Visitors Chairs with fixed arms with sledge base of Featherlite, Godrej or equivalent make, including the cost of all the materials, labour and transportation, lead and lift etc., complete as per the direction of the Engineer-in-charge of the work. (ALPHA SB)(APPROVED RATE SE- NO-559 DATED 21-06-2021) sl no 31

007 - Supplying and fixing in position designer THREE SEATER Leather sofa of Standard size of Durian or equivalent make,etc., complete. The work includes cost of all materials, labour charges with lead and lift, loading and unloading charges with all machineries and all other incidental charges etc., complete as per direction of the Engineer-in-charge of the work. (APPROVED RATE SE- NO-7154 DATED 11-01-2016) SL no 21

008 - Supplying and fixing in position designer SINGLE SEATER Leather sofa of Standard size of Durian or equivalent make complete. The work includes cost of all materials, labour charges with lead and lift, loading and unloading charges with all machineries and all other incidental charges etc., complete as per direction of the Engineer-in-charge of the work. (APPROVED RATE SE- NO-7154 DATED 11-01-2016) SL no 19

009 - Providing Deewan cot made of teak wood frames with teak wood jogs, the size of the Dewaan is 600x1800mm with approved design. The top is covered with 19mm thick block board. The mattress of Kurl-on make consisting 125mm thick of approved colour fabric. Work includes cost of all materials, labour charges with all lead and lift, loading and unloading, transportation, machineries and all other incidental charges etc., complete as per the direction of the Engineer-in-charge of the work. (APPROVED RATE 7154 DATED 11/01/2016). Sl no 16

010 - Providing and Supply of 4 seater DINING SET in Rustic Teak Finish, Complete. including cost of all materials, labour and transportation, lead and lift, etc., and all incidental charges etc., complete as per the direction of Engineer-in-charge of work, (Set contains 1 Dining Table, 2 cushioned Dining chairs,1 Cushioned Bench) (ADR No.786 Dated: 17-06-2023, Sl. No. 08)

011 - Providing and fixing Executive Table of size 2350mm x 900mm x 760mm ht and side table 700mm x 400mm x 760mm ht as per the drawing and table frame is made up of M.S angle of size 40mm x 40mm x 3mm thick both horizontal member and vertical legs. The M.S. angle is M.S.CRCA powder coated chrome finishes of approved colour. the top of the main table and side table is made with sides panel MDF of 25mm thick and 2mm veneer finish with melamine polish. Computer rack of size 400mm x 300mm x 500mm depth of M.S Sheet metal of 1.60mm ht with powder coated finish of approved colour is fixed to the main table, side table is side drawer unit having door shutters of M.S. Sheet metal with central locking system. All the hardware or screws used are M.S powder coated with chrome finish and hinges are soft door hinges of standard make complete including cost of conveyance of all materials, labour for all items of work, hire charges of machineries, all lead and lift, transportations, loading and unloading and all other incidental charges etc., complete as per specification and direction of the Engineer in charge of the work.(APPROVED RATE SE- NO-4449 DATED 19-01-2023) Sl No 07

012 - Wooden Mobile Pedestal Unit with Cushion:- Providing and placing position pedestal unit of 450mm x 450mm x 600mm ht. pedestals are made from 19mm thick prelaminated PLPB Board with matching colour edge binding. Top of the pedestal to have washable and removable upholstery. Drawer unit shall consist of 2 nos drawers as per the drawing. drawers have full extension ball bearing slides. Mobile pedestals to have an anti-tilt caster and all pedestals shall have a central locking system. All pedestals and flipper bins have quality locks with removable inner cylinders and are master keyed up to 2000 different combinations. cost to include the fittings such as locks, handles, complete., as per the instructions by client and drawing/ image.(APPROVED RATE SE- NO-2929 DATED 02-11-2023) Sl No 26