Public Works Department Tender

KSRRB 300-Compaction KSRRB 300-58. Compaction of original ground with maximum of 6 passes of 8 to 10 tonnes power roller including filling in depression occuring during rolling including cost of all labour, HOM of machinery complete as per specifications. MORTH / Chapter 3 ---- including all Lead lift curing machinaries etc., complete as per the directions of the Engineer incharge of the work

KSRRB M300-14. Excavation for roadwork in all types of soil by mechanical means including cutting and loading to tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transportation with a lead of 1.00 km and complete as per specifications. MORTH Specification No.301 ---- including all Lead lift curing machinaries etc., complete as per the directions of the Engineer incharge of the work

KSRRB M300- Construction of Embankment with Material Gravel/ Murrum. KSRRB M300-53. Construction of embankment with approved material Gravel/Murrum with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement Table 300- 2 complete as per specifications.(Including cost of gravel / murrum, watering charges & compaction by vibratory roller to 95% of proctors density) MORTH Specification No. 305 ---- including all Lead lift curing machinaries etc., complete as per the directions of the Engineer incharge of the work

Construction of granular sub-base Grading-Vas Sub-base and drainage layer by providing coarse graded crushed stone aggregates of granite/ trap/basalt material, mixing in a mechanical mix plant at OMC, Carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the 98% proctor density, complete as per specifications. Clause 401 of MORTH V Revision ---- including all Lead lift curing machinaries etc., complete as per the directions of the Engineer incharge of the work

KSRRB M600-2. Providing and Constructing un-reinforced, dowel jointed, plain cement Pavement Quality concrete for pavements using Grade concrete M40 having Flexural strength not less than 4.50 Mpa over a prepared base with OPC, coarse aggregate at 0.64 cum, fine aggregates at 0.36 cum,Coarse and fine aggregate conforming to IS:383- 2016 and Table 600-3 of MORTH V Revision, with Superplastizer at 3 Its conforming to IS 9103-2008. loading materials to batch mix plant by front end loader,mixed in a cement concrete batch mix plant as per approved mix design,transported to site in transit truck agitator 5 cum capacity, laid with Paver, compacted and finished in a continuous operation as per IRC-15 including cost for providing of contraction,expansion, co nstruction and longitudinal joints, joint filler, separation membrane of impermiable plastic sheet of 125 micron, groove cutting,sealant primer joint sealent, debonding strip,dowel bars at 9 kg/cum, tie rods at 1.15 kg/cum, admixtures as approved, curing compound, finishing to lines and grades, textured with texturing machine, and curing including cost of all materials, labour,hire charges of machineries, aII lead & lift charges etc., complete as per specifications. Clause 601of MORTH V Revision and IS 456 Table-5 with OPC at 420 kg/cum and coarse aggregate 0.64cum, fine aggregate 0.36cum using Concrete Batch mix Plant at 75 cum/hr capacity with fixed form paver. ---- including all Lead lift curing machinaries etc., complete as per the directions of the Engineer incharge of the work

Constructing un-reinforced, plain cement concrete for pavements using Grade concrete M30 over a prepared base with OPC coarse aggregate at 0.69 cum, fine aggregates at 0.46 cum,Coarse and fine aggregate conforming to IS:383-2016, with Superplastizer at 3 Its conforming to IS 9103-2008. mixed in a concrete mixer of not less than 0.6 cum capacity and appropriate weigh batcher as per approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work as per drawing). & Spreading the concrete with shovels, rackers compacted using needle, screed and plate vibrator and finished with floaters in a continuous operation including provision of contraction, expansion, construction and longitudinal joints,including groove cutting charges, joint filler, separation membrane of impermiable plastic sheet of 125 micron, sealant primer, joint sealant, admixtures as approved, curing compound, finishing to lines and grades, textured with texturing machine, and curing including cost of all materials, labour,hire charges of machineries,all lead & lift charges etc., complete as per specifications. with OPC at 360 kg/cum and coarse aggregate 0.69cum, fine aggregate 0.46cum. ---- including all Lead lift curing machinaries etc., complete as per the directions of the Engineer incharge of the work

KSRRB M400- Wet Mix Macadam KSRRB M400-17. Providing, laying, spreading and compacting crushed stone aggregates of granite / trap / basalt to wet mix macadam specifications including pre mixing the material with water at OMC in mechanical mix plant carriage of mixed method of tipper to site, laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density complete as per specifications. MORTH Specification No. 406 ---- including all Lead lift curing machinaries etc., complete as per the directions of the Engineer incharge of the work

KSRRB M800-14.2. Reinforced cement concrete M-15 Grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc complete as per specifications.including additional M-15 concrete pedestal of 0.2mt. height above G.L. MORTH Specification No. 804 ---- including all Lead lift curing machinaries etc., complete as per the directions of the Engineer incharge of the work

KSRRB M800-14.3. Reinforced cement concrete M-15 Grade Hectometer stone of standard design as per IRC:26-1980, fixing in position including painting and printing etc complete as per specifications. including additional M-15 concrete pedestal of 0.2mt. height above G.L. MORTH Specification No. 804 ---- including all Lead lift curing machinaries etc., complete as per the directions of the Engineer incharge of the work

Providing and laying reinforced cement concrete pipe NP3 for culverts including pointing ends, and fixing collars with cement mortar 1:2 including cost of all materials, labour, curing complete as per specifications. Specifications. No. KSRB 1000, 2300 MOST Specification No.1000 / 2300 - - 450mm. dia ---- including all Lead lift curing machinaries etc., complete as per the directions of the Engineer incharge of the work

Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 em x 45 em x 60 em, 60 em below ground level as per approved drawing. 600 MM Circle- TYPE XI ---- including all Lead lift curing machinaries etc., complete as per the directions of the Engineer incharge of the work

Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 em x 45 em x 60 em, 60 em below ground level as per approved drawing. 600 M M Equilateral triangle -TYPE XI ---- including all Lead lift curing machinaries etc., complete as per the directions of the Engineer incharge of the work

Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 em x 45 em x 60 em, 60 em below ground level as per approved drawing. 900 M M Octagon Stop Board -TYPE XI ---- including all Lead lift curing machinaries etc., complete as per the directions of the Engineer incharge of the work

KSRRB M800-13.Road Marking with Hot Applied Thermoplastic Compound with Reflectrising Glass Beads on Bituminous Surface:- Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes complete as per specifications. MORTH Specification No. 803 ---- including all Lead lift curing machinaries etc., complete as per the directions of the Engineer incharge of the work

KSRRB MS00-15. Road Delineators: Supply & Installation of Vertical Delineator having wide angle cube corner micro prismatic non metallic reflective sheeting confirming to Type XI of IRC 672012 with White and Red Color combination and having minimum of retro reflective exposed area of 125 Sq CM on top slots & 35 Sq CM on bottom slots and no edges shall be exposed for tampering. This tubular delineator shall have a core and shell construction, shell shall be made of tough, high impact resistant, injection-molded, thermoplastic outer body & the inner core shall consist of powder coated or painted Mild steel of minimum thickness 1.0mm.& core-shell structure shall be of height not less than 800 mm above the ground and width not less than 80 mm. The metallic core of the delineator shall extend 300mm beyond the shell length from bottom for installing in the ground. The extended portion of the metallic core having suitable slots to be fixed in M20 grade Cement Concrete of size 300X300X400 M M with suitable anchoring rods for enhancing the grip,as per IRC 79 Specifications. ---- including all Lead lift curing machinaries etc., complete as per the directions of the Engineer incharge of the work

KSRRB M800 Road markers I Road stud KSRRB MS00-35. Supply and lnstalltion of Moulded Shank Raised Pavement Markers made of polycarbonate and ABS(Acrylonitrile Butadiene Styrene) moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to Specifications of Category A of MORTH Circular No RW/ NH/33023/10-97- DO Ill Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 1DO mm and 102 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 mm and height not less than 30 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer ---- including all Lead lift curing machinaries etc., complete as per the directions of the Engineer incharge of the work

KSRRB M800 - Street lighting KSRRB M800-27. Providing and erecting street light mounted on a steel circular hollow pole of standard specifications for street lighting, 9 m high spaced 40 m apart, 1.8 m overhang on both sides if fixed in the median and on one side if fixed on the footpath, fitted with sodium vapour lamp and fixed firmly in concrete foundation complete as per specifications. Excluding cost of earth work excavation & PCC for fixing. MORTH Specification No. Suggestive ---- including all Lead lift curing machinaries etc., complete as per the directions of the Engineer incharge of the work

Providing and fixing RCC name board of size 1.35xk0.60x0.04 mtrs fixed in reinforced cement concrete poles of size 0.1OxO.1Ox2.60mtrs in cement concrete M 20 proportion using 20mm and down size graded metal machine mixed with 1Omm dia main steel bars and 8mm dia stirups. The board shall be provided with 12mm thick cement plaster in cement mortar 1 :3 on both the sides. The poles shall be embedded in the ground for a depth of0.5 mtrs with cement concrete M 10 proportion. The board shall be fixed as per the drawing and atthe place indicated by the Engineer incharge of the work. The cost includes excavation, bare cost of all materials, cost of steel, centering, transportation charges, fixing charges, labour, HOM etc., The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work. ---- including all Lead lift curing machinaries etc., complete as per the directions of the Engineer incharge of the work

Earth work in excavation for foundation of structures like culverts, retaining walls etc., as per drawing and technical specification, including setting out, construction of shoring and bracing, dressing of sides and bottom, backfilling with approved material, disposal of balance earth as per specifications, including cost of labour, HOM etc. , complete. in all kinds of soil by mechanical means. ---- including all Lead lift curing machinaries etc., complete as per the directions of the Engineer incharge of the work

KSRRB M2900- PCC M10 in Foundation KSRRB M2900-1. Plain cement concrete M10 mix with crushed stone aggregate 40mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing including cost of materials, labour, HOM complete as per specifications. MORTH Specification No. 408 ---- including all Lead lift curing machinaries etc., complete as per the directions of the Engineer incharge of the work

Providing and laying reinforced cement concrete pipe NP3 for culverts including pointing ends, and fixing collars with cement mortar 1:2 including cost of all materials, labour, curing complete as per specifications. Specifications. No. KSRB 1000, 2300 MOST Specification No.1000 / 2300 - - 900mm. dia ---- including all Lead lift curing machinaries etc., complete as per the directions of the Engineer incharge of the work

KSRRB M300- Construction of Embankment with Material Gravel/ Murrum. KSRRB M300-53. Construction of embankment with approved material Gravel/Murrum with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement Table 300- 2 complete as per specifications.(Including cost of gravel / murrum, watering charges & compaction by vibratory roller to 95% of proctors density) MORTH Specification No. 305 ---- including all Lead lift curing machinaries etc., complete as per the directions of the Engineer incharge of the work

Earth work in excavation for foundation of structures like culverts, retaining walls etc., as per drawing and technical specification, including setting out, construction of shoring and bracing, dressing of sides and bottom, backfilling with approved material, disposal of balance earth as per specifications, including cost of labour, HOM etc. , complete. in all kinds of soil by mechanical means. ---- including all Lead lift curing machinaries etc., complete as per the directions of the Engineer incharge of the work

KSRRB M2900- PCC M10 in Foundation KSRRB M2900-1. Plain cement concrete M10 mix with crushed stone aggregate 40mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing including cost of materials, labour, HOM complete as per specifications. MORTH Specification No. 408 ---- including all Lead lift curing machinaries etc., complete as per the directions of the Engineer incharge of the work

KSRRB M2200-6. Providing T. M.T. steel reinforcement for R.C.C. work including straightening, cutting, bending, hooking, placing in position, lapping and/or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per disign (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM complete as per specification. MORTH Specification No.1600 & 2200 TMT Bars Fe 500 ---- including all Lead lift curing machinaries etc., complete as per the directions of the Engineer incharge of the work

KSRB 2.3 : Filling available excavated earth ( excluding rock ) in sides of foundations upto plinth in layers not exceeding 20 cms. in depth, compacting each deposited layer by ramming after watering with lead upto 50 m. and lift upto 1.5 m. including cost of all labour complete as per specifications. specification. No. KBS 2.9 ---- including all Lead lift curing machinaries etc., complete as per the directions of the Engineer incharge of the work

KSRRB M600-1.Providing and Constructing dry lean cement concrete mix CC 1:5:10 base with OPC 25mm and down size graded granite metal coarse aggregate at 0.86cum and fine aggregates @0.58cum over a prepared sub-base, coarse and fine aggregate conforming to IS: 383-2016,aggregate cement ratio not to exceed 15:1, Aggregate gradation after blending to be as per Table 600-1,optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver, compacting with 8-10 tonnes vibratory roller, finishing and curing complete as per specifications. Clause 601of MORTH V Revision and IS 456 Table-5 with OPC at 150 kg/cum and coarse aggregate 0.86 cum, fine aggregate 0.58 cum using Concrete Batch mix Plant at 75 cum/hr capacity with fixed form paver. (P.No 174 / 22.1.2) ---- including all Lead lift curing machinaries etc., complete as per the directions of the Engineer incharge of the work

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975 (KPWD ele SR p.No. 61/ I.No. 7.8.1 for instalation) (PWD Ele SR for 2019-20 P.No.40 I.No. 6.4.4) 4 core 16 sqmm ---- including all Lead lift curing machinaries etc., complete as per the directions of the Engineer incharge of the work

Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. (KPWD ele SR for 2019-20 P.No. 16/ I.No.4.7.5) Double Arm Bracket with 1500mm Standard 40/50MM dia ---- including all Lead lift curing machinaries etc., complete as per the directions of the Engineer incharge of the work

DWC HDPE Pipe: supply and laying double walled corrugated (DWC) HDPE pipe with necessary connecting sockets/Couplings/Tees/Bends of same materials in existing trench as per IS 14930 Part-II suitable for drawing under ground cable 77mm OD/67 mm ID- (KPWD ele SR 13/14/ I.No.7.20.4 P.No. 63) ---- including all Lead lift curing machinaries etc., complete as per the directions of the Engineer incharge of the work

Providing and laying in position plain/Reinforced cement cement concrete M20 for sub-structure/Superstructure works, with cement @ 320 kgs, 20 mm & down size graded granite metal coarse aggregate @ 0.69 cum and fine aggregates @ 0.46 cum machine mixed with super plasticisers @ 3 lts confirming to IS 9103-2008,concrete laid in layers, well compacted and providing weep holes wherever necessary with necessary scaffolding, form work etc., including cost of labour, HOM curing etc., complete (P.No 257/ 34.17) ---- including all Lead lift curing machinaries etc., complete as per the directions of the Engineer incharge of the work

Providing and laying in position plain/Reinforced cement cement concrete M20 for sub-structure/Superstructure works, with cement @ 320 kgs, 20 mm & down size graded granite metal coarse aggregate @ 0.69 cum and fine aggregates @ 0.46 cum machine mixed with super plasticisers @ 3 lts confirming to IS 9103-2008,concrete laid in layers, well compacted and providing weep holes wherever necessary with necessary scaffolding, form work etc., including cost of labour, HOM curing etc., complete (P.No 257/ 34.17) ---- including all Lead lift curing machinaries etc., complete as per the directions of the Engineer incharge of the work

Providing and laying plain/reinforced cement concrete for side drains using M20 nominal mix concrete with OPC cement at 300 kgs. with 20mm and down size granite metal coarse aggregates at 0.69 cum and fine aggregates at 0.43 cum machine mixed, well compacted for walls and bottom including centering, shuttering, cost of materials, HOM of machinery, curing etc., complete excluding cost of steel as per MORTH specification No. 1500,1700, 2200. Wall & bottom thickness 15cm (PWD SR 2018-19/P.No. 271/37.59.2) ---- including all Lead lift curing machinaries etc., complete as per the directions of the Engineer incharge of the work

Providing and laying 100mm thick pre-cast cover slabs over drains of width not exceeding 800mm using M20 concrete reinforced with steel @ 6.00 kg/sqm, slabs jointed in CM 1:3 proportion and nicely finished incluiding providing holes in the Cover slabs wherever necessary for easy drainage of surface water including of labour, materials, HOM curing lead andf lift charges etc., Complete as per MORTH specifications No. 1500, 1700 (P.No: 252, I.No: 37.66) ---- including all Lead lift curing machinaries etc., complete as per the directions of the Engineer incharge of the work

Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding, as per standerd procedure and guide lines including encasing the pipe around to a depth not less than 15cms with cleaned soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant IS Specification with all lead and lift including , testing and commissioning. The rate is exclusive of required specials and fittings etc., complete (Contractor will make his own arrangement for procuring water for testing)Upto 110mm dia,Coils shall be used.. (RWS SR for 2019-20 B'lore P.No.11/ I.No. 10.20.1 (c) PE80 (PN 6.0/6 Kg/cm2) c) 90 mm ---- including all Lead lift curing machinaries etc., complete as per the directions of the Engineer incharge of the work