Police Modernisation Division Tender

Rack type-A switch-3 (Each switch may belong to one of the following three series only: Cisco Catalyst 9200 series or HPE Aruba 2930M series or Juniper EX4300 series. Each switch should be a full-fledged Layer-2 functionality manageable switch. Each switch should provide 48 UTP ports. Must be a full (all 48 ports) POE/POE+ with a power budget of 900W for POE/POE+ if neither item 2 nor item 3 is a full POE/POE+ switch. This item along with item 2 and item 3 must a total of have at least 16 multi-Gigabit (1GbE / 2.5 GbE / 5 GbE) UTP PoE+ ports, and it must be ensured that all multi-Gigabit interfaces are of the PoE+ type (IEEE 802.3at and IEEE 802.3af) with power delivery of 30W per PoE/PoE+ port at all multi-Gigabit ports simultaneously. Each switch must be stackable with other switches of rack type A, i.e. item 2 and item 3, and sufficient number of stacking cables must be included. Each switch must have at least two redundant power supplies built in. Each switch must satisfy the detailed conditions provided in Section 3 of the tender document that are applicable to Layer 2 switches. It must also be compliant with the requirements for switches of rack type A in Section 5.2 of the tender document.)

Rack type-B switch-1 (Each switch may belong to one of the following three series only: Cisco Catalyst 9200 series or HPE Aruba 2930M series or Juniper EX4300 series. Each switch should be a full-fledged Layer-2 functionality manageable switch. Each switch should provide 48 UTP ports, and must each contain a minimum of 2 SFP+ interfaces, supporting 1GbE SFP and 10 GbE SFP+ transceivers. Must be a full (all 48 ports) POE/POE+ with a power budget of 900W for POE/POE+ if item 6 is a not full POE/POE+ switch. This item along with item 6 must a total of have at least 16 multi-Gigabit (1GbE / 2.5 GbE / 5 GbE) UTP PoE+ ports, and it must be ensured that all multi-Gigabit interfaces are of the PoE+ type (IEEE 802.3at and IEEE 802.3af) with power delivery of 30W per PoE/PoE+ port at all multi-Gigabit ports simultaneously. Each switch must be stackable with other switches of rack type B, i.e. item 6, and sufficient number of stacking cables must be included. Each switch must have at least two hot-swappable redundant power supplies built in. Each switch must satisfy the detailed conditions provided in Section 3 of the tender document that are applicable to Layer 2 switches. It must also be compliant with the requirements for switches of rack type B in Section 5.3 of the tender document.)

Rack type-B switch-2 (Each switch may belong to one of the following three series only: Cisco Catalyst 9200 series or HPE Aruba 2930M series or Juniper EX4300 series. Each switch should be a full-fledged Layer-2 functionality manageable switch. Each switch should provide 48 UTP ports, and must each contain a minimum of 2 SFP+ interfaces, supporting 1GbE SFP and 10 GbE SFP+ transceivers. Must be a full (all 48 ports) POE/POE+ with a power budget of 900W for POE/POE+ if item 5 is a not full POE/POE+ switch. This item along with item 5 must a total of have at least 16 multi-Gigabit (1GbE / 2.5 GbE / 5 GbE) UTP PoE+ ports, and it must be ensured that all multi-Gigabit interfaces are of the PoE+ type (IEEE 802.3at and IEEE 802.3af) with power delivery of 30W per PoE/PoE+ port at all multi-Gigabit ports simultaneously. Each switch must be stackable with other switches of rack type B, i.e. item 5, and sufficient number of stacking cables must be included. Each switch must have at least two hot-swappable redundant power supplies built in. Each switch must satisfy the detailed conditions provided in Section 3 of the tender document that are applicable to Layer 2 switches. It must also be compliant with the requirements for switches of rack type B in Section 5.3 of the tender document.)

Rack type-C switch-1 (The switch may belong to one of the following three series only: Cisco Catalyst 9200 series or HPE Aruba 2930M series or Juniper EX4300 series. The switch should be a full-fledged Layer-2 functionality manageable switch. The switch should provide 48 UTP ports, and must contain a minimum of 2 SFP+ interfaces, supporting 1GbE SFP and 10 GbE SFP+ transceivers. Must be a full (all 48 ports) POE/POE+ with a power budget of 900W for POE/POE+ if none of items 8, 9, 10, or 11 is a full POE/POE+ switch. This item along with items 8, 9, 10, and 11 must a total of have at least 16 multi-Gigabit (1GbE / 2.5 GbE / 5 GbE) UTP PoE+ ports, and it must be ensured that all multi-Gigabit interfaces are of the PoE+ type (IEEE 80+B202.3at and IEEE 802.3af) with power delivery of 30W per PoE/PoE+ port at all multi-Gigabit ports simultaneously. The switch must be stackable with other switches of rack type C, i.e. items 8, 9, 10, and 11, and sufficient number of stacking cables must be included. The switch must have at least two hot-swappable redundant power supplies built in. The switch must satisfy the detailed conditions provided in Section 3 of the tender document that are applicable to Layer 2 switches. It must also be compliant with the requirements for switches of rack type C in Section 5.4 of the tender document.)

Rack type-C switch-2 (The switch may belong to one of the following three series only: Cisco Catalyst 9200 series or HPE Aruba 2930M series or Juniper EX4300 series. The switch should be a full-fledged Layer-2 functionality manageable switch. The switch should provide 48 UTP ports, and must contain a minimum of 2 SFP+ interfaces, supporting 1GbE SFP and 10 GbE SFP+ transceivers. Must be a full (all 48 ports) POE/POE+ with a power budget of 900W for POE/POE+ if none of items 7, 9, 10, or 11 is a full POE/POE+ switch. This item along with items 7, 9, 10 and 11 must a total of have at least 16 multi-Gigabit (1GbE / 2.5 GbE / 5 GbE) UTP PoE+ ports, and it must be ensured that all multi-Gigabit interfaces are of the PoE+ type (IEEE 802.3at and IEEE 802.3af) with power delivery of 30W per PoE/PoE+ port at all multi-Gigabit ports simultaneously. The switch must be stackable with other switches of rack type C, i.e. items 7, 9, 10, and 11, and sufficient number of stacking cables must be included. The switch must have at least two hot-swappable redundant power supplies built in. The switch must satisfy the detailed conditions provided in Section 4 of the tender document that are applicable to Layer 2 switches. It must also be compliant with the requirements for switches of rack type C in Section 5.4 of the tender document.)

Rack type-C switch-3 (The switch may belong to one of the following three series only: Cisco Catalyst 9200 series or HPE Aruba 2930M series or Juniper EX4300 series. The switch should be a full-fledged Layer-2 functionality manageable switch. The switch should provide 48 UTP ports. Must be a full (all 48 ports) POE/POE+ with a power budget of 900W for POE/POE+ if none of items 7, 8, 10, or 11 is a full POE/POE+ switch. This item along with items 7, 8, 10, and 11 must a total of have at least 16 multi-Gigabit (1GbE / 2.5 GbE / 5 GbE) UTP PoE+ ports, and it must be ensured that all multi-Gigabit interfaces are of the PoE+ type (IEEE 802.3at and IEEE 802.3af) with power delivery of 30W per PoE/PoE+ port at all multi-Gigabit ports simultaneously. The switch must be stackable with other switches of rack type C, i.e. items 7, 8, 10, and 11, and sufficient number of stacking cables must be included. The switch must have at least two hot-swappable. redundant power supplies built in. The switch must satisfy the detailed conditions provided in Section 3 of the tender document that are applicable to Layer 2 switches. It must also be compliant with the requirements for switches of rack type C in Section 5.4 of the tender document.)

Rack type-C switch-4 (The switch may belong to one of the following three series only: Cisco Catalyst 9200 series or HPE Aruba 2930M series or Juniper EX4300 series. The switch should be a full-fledged Layer-2 functionality manageable switch. The switch should provide 48 UTP ports. Must be a full (all 48 ports) POE/POE+ with a power budget of 900W for POE/POE+ if none of items 7, 8, 9, or 11 is a full POE/POE+ switch. This item along with items 7, 8, 9, and 11 must a total of have at least 16 multi-Gigabit (1GbE / 2.5 GbE / 5 GbE) UTP PoE+ ports, and it must be ensured that all multi-Gigabit interfaces are of the PoE+ type (IEEE 802.3at and IEEE 802.3af) with power delivery of 30W per PoE/PoE+ port at all multi-Gigabit ports simultaneously. The switch must be stackable with other switches of rack type C, i.e. items 7, 8, 9, and 11, and sufficient number of stacking cables must be included. The switch must have at least two hot-swappable redundant power supplies built in. The switch must satisfy the detailed conditions provided in Section 3 of the tender document that are applicable to Layer 2 switches. It must also be compliant with the requirements for switches of rack type C in Section 5.4 of the tender document.)

Rack type-C switch-5 (The switch may belong to one of the following three series only: Cisco Catalyst 9200 series or HPE Aruba 2930M series or Juniper EX4300 series. The switch should be a full-fledged Layer-2 functionality manageable switch. The switch should provide 48 UTP ports. Must be a full (all 48 ports) POE/POE+ with a power budget of 900W for POE/POE+ if none of items 7, 8, 9, or 10 is a full POE/POE+ switch. This item along with items 7, 8, 9, and 10 must a total of have at least 16 multi-Gigabit (1GbE / 2.5 GbE / 5 GbE) UTP PoE+ ports, and it must be ensured that all multi-Gigabit interfaces are of the PoE+ type (IEEE 802.3at and IEEE 802.3af) with power delivery of 30W per PoE/PoE+ port at all multi-Gigabit ports simultaneously. The switch must be stackable with other switches of rack type C, i.e. items 7, 8, 9, and 10, and sufficient number of stacking cables must be included. The switch must have at least two hot-swappable redundant power supplies built in. The switch must satisfy the detailed conditions provided in Section 3 of the tender document that are applicable to Layer 2 switches. It must also be compliant with the requirements for switches of rack type C in Section 5.4 of the tender document.)

Rack type-D switch-1 (The switch may belong to one of the following three series only: Cisco Catalyst 9200 series or HPE Aruba 2930M series or Juniper EX4300 series. The switch should be a full-fledged Layer-2 functionality manageable switch. The switch should provide 48 UTP ports, and must contain a minimum of 2 SFP+ interfaces, supporting 1GbE SFP and 10 GbE SFP+ transceivers. Must be a full (all 48 ports) POE+ (IEEE 802.3at and IEEE 802.3af) with a power budget of 900 W, out of which at least 8 must be multi-Gigabit (1GbE / 2.5 GbE / 5 GbE) UTP PoE+ ports, with a power delivery of 30W per PoE/PoE+ port at all multi-Gigabit ports simultaneously.The switch must have at least two hot-swappable redundant power supplies built in. Each switch must satisfy the detailed conditions provided in Section 3 of the tender document that are applicable to Layer 2 switches. It must also be compliant with the requirements for switches of rack type D in Section 5.5 of the tender document.)

Rack type-E switch-1 (Each switch may belong to one of the following three series only: Cisco Catalyst 9300 series or HPE Aruba 2930M series or Juniper EX4300 series. Each switch should be a full-fledged Layer-2 functionality manageable switch. Each switch should provide at least 24 UTP ports, and must each contain a minimum of 2 SFP+ interfaces, supporting 1GbE SFP and 10 GbE SFP+ transceivers. Each must be have at least 24 multi-Gigabit (1GbE / 2.5 GbE / 5 GbE) UTP PoE+ ports (IEEE 80+B202.3at and IEEE 802.3af) with power budget of 740W for PoE/PoE+. It must ensured that there is a power delivery of 30W per PoE/PoE+ port at all multi-Gigabit ports simultaneously. Each switch must have at least two hot-swappable redundant power supplies built in. Each switch must satisfy the detailed conditions provided in Section 3 of the tender document that are applicable to Layer 2 switches. It must also be compliant with the requirements for switches of rack type E in Section 5.6 of the tender document.)

Rack type-F switch-1 (The switch may belong to one of the following three series only: Cisco Catalyst 9300 series or HPE Aruba 8320 series or Juniper EX4300 series. The switch should be a full-fledged Layer-2 functionality manageable switch. The switch should provide at least 24 UTP ports, and must contain a minimum of 2 SFP+ interfaces, supporting 1GbE SFP and 10 GbE SFP+ transceivers. The must be have at least 24 multi-Gigabit (1GbE / 10 GbE) UTP ports. The switch must have at least two hot-swappable redundant power supplies built in. Each switch must satisfy the detailed conditions provided in Section 3 of the tender document that are applicable to Layer 2 switches. It must also be compliant with the requirements for switches of rack type F in Section 5.7 of the tender document.)

Single Mode 1310nm SFP+ transceiver (10GBASE-LR) of the same OEM as the quoted switches. The transcievers must be compatible with the quoted switches.

Installation, configuration, testing and commissioning with documentation