Nuclear Power Corporation Of India Limited Tender

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. Note: The payment will be made once irrespective of duration of scaffolding

Providing, fabricating and errecting Mild Steel Structures using various MS Sections such as channels, angles, 'I' sections, rails, MS pipes, flats, plates, GI Gratings, GI Pipes, MS & Reinforcement rods and other approved sections etc. & transporting to the work place, including loading, unloading, cutting, fabricating the MS gates, MS grills, ladders, hand rails, angle frames, panels, struts, tubular space frames, columns, beams, purlins, rafters, fencing posts, EP Plates, EP Flats & all other required miscellaneous structural steel works and fixing / erecting the same in position as directed. including providing & applying One Coat of Zinc Phosphate Primer & Two Coats of 1st quality Synthetic Enamel Paint of approved shade / colour [Primer & Paint shall of Asian Paints / Berger Paints ], providing & fixing wherever required suitable anchor fasteners, of approved quality, preparation of base, providing; fixing & removing necessary scaffolding / staging / platform, cleaning the work area, collecting & disposing the construction waste up to a lead of 2 to 3 kms. from the place of work etc. complete all as per technical specification, as per manufacturer's technical specification, fabrication as per drawing (if any) and as directed by engineer-in-charge at all locations and at all lift & height.