Nuclear Power Corporation Of India Limited Tender

Providing and laying of 90-100 micron thick, polythene sheet [of superior 1st quality, of standard make & confirming relevent BIS specification] as a separation layer above WBM / RCC / PCC with an overlap [both direction] of 150 mm [minimum] including preparation of base, laying the sheet without any folds / wrinkles, providing; fixing & removing necessary staging / platform / ladder [if required], preparation of base, collecting & disposing the generated waste, up to a lead of 2000 meters from the place of work & cleaning the work area, etc. complete all as per standard & manufacturers technical specification, drawing [if any] and as directed by engineer-in-charge at all locations & lifts.

Providing and laying approved make high yield strength deformed Reinforcement bars [of superior 1st quality, of standard make] of all dia meters, confirming to grade D - 500 of IS:1786 [latest edition] including cutting, bending, transporting, placing in position & binding with suitable gauge soft annealed binding wire for all in-situ concrete works and all other miscellaneous RCC works, providing & placing spacer bars, cover blocks [cover blocks shall be cast in same grade of concrete & cured properly], preparation of base, providing; fixing & removing necessary staging / platform / ladder, collecting & disposing the generated waste, up to a lead of 2000 meters from the place of work & cleaning the work area, etc. complete all as per standard & manufacturers technical specification, drawing [if any] and as directed by engineer-in-charge at all locations & lifts / heights.

Providing and laying RCC, M 20 grade using 20 mm & downsize clean, crushed, well graded, aggregates of hard, durable & approved quality for foundation, rafts, footings, plinth, columns, beams, slabs, Chejjas, Lintels & for all in-situ concrete works including preparation of base by close hacking / chipping the old surface, racking out the masonry joints & cleaning, mechanical mixing, transporting, laying, spreading, consolidation, levelling, finishing & curing, providing; fixing & removing necessary staging / platform, collecting & disposing the generated waste, up to a lead of 2000 meters from the place of work & cleaning the work area, etc. complete all as per standard technical specification, drawing and as directed by engineer-in-charge at all locations & lifts / heights. Note: 1] Mixing and Compaction Mechanically, the minimum cement content is 360 kgs/cum. OPC 43 grade cement shall be used. 2] Providing; fixing & removing necessary formwork will be measured & paid under separate item. 3] The polythene sheet will measured and paid under separate item. 4] Concreting should be done with self loading mobile concrete mixers (Eg. Ajax machine).

Cutting the Groove on the RCC Road Surface for a width of 5 mm to 8 mm and depth 50 to 75 mm including higher charges of cutting machine, generator & other required machineries, including cost of blades, coolant, tools & tackles and other consumables, cleaning of groove and providing sand and hot bitumen fillers, preparation of base, collecting & disposing the generated waste, up to a lead of 2000 meters from the place of work & cleaning the work area, etc. complete all as per standard technical specification, drawing [if any] and as directed by engineer-in-charge at all locations & lifts.