Nuclear Power Corporation Of India Limited Tender

Providing and laying Internal Cement Plaster 15 mm. thick in CM 1:4 to the Masonry & concrete surfaces etc., rubbed perfectly so as to obtain smooth & even finish including curing & preparation of base properly, providing; fixing & removing necessary staging / platform, Stacking of debris upto lead of 2000 meters etc., complete all as per specification and as directed by the Engineer-in-charge at all locations and at all lifts / heights.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as directed by Engineer-In-Charge.Frame size: Size 65mmx 100mm

Providing and fixing in position factory made, FRP , door shutters made out of fiber glass reinforced plastic sheets having over all thickness not less than 2.00 mm [with a tolerance of + - 0.2 mm ] The shutter shall have outer wooden frame made of 65 mm wide X 30 mm thick well seasoned hard wood and also with vertical, horizontal, middle & locking rails to mount the hardware & fixtures. The door surface further to have depressed mould design with special impression of wood veins of tan [brown] colour. The infill shall be with polyurethane thermo coal dipper in resin/ non-decaying type layers of cardboards dipper in resin. The entire shutter shall have glossy polish with IS specification including providing & fixing [ to each shutter]One number of 250mm long & 16mm dia. Aldrop, One number of 200 mm long & 10 mm dia. Tower Bolt; One number of 150mm long & 10 mm dia. Tower Bolt, Two numbers of 125 mm grip 'D handles, One number of 40 mm dia & 50mm long rubber bushes [Aldrop, Tower Bolts & 'D' handles shall be of approved make aluminum powder coated ], preparation of base, providing: fixing & removing necessary staging/ platform /ladder, collecting & disposing the generated waste up to a lead of 2000meters . from the place of work & cleaning the work area, etc. completed all as per standard & manufactures technical specification, drawing [if any] and as directed by Engineer-In-Charge. at all locations and at all lift / height.

Providing and fixing in position the factory made, 30 mm thick, Single / Double, Leaf Flush Door Shutter [of superior 1st quality, of standard make & Confirming to relevant BIS specification of latest edition] of boiled water proof solid core block board with 30 X 20 mm external teak wood lapping alround, bonded with phenol formaldehyde synthetic resin, hot pressed including preparation of base, providing & fixing [fittings such as] powder coated One number of 250 mm long & 16 mm dia Aldrop, One number of 200 mm long & 10 mm dia Tower Bolt; Two numbers of 125 mm grip ,'D' handles, One number of Door Stopper, One Number of Door Bush & One number of cylindrical seven lever lock [Aldrop, cylindrical seven lever lock, Tower Bolts, 'D' handles, Door Stoppers & Door Bushes and each shutter shall be fixed with four numbers of 125 mm long MS oxidized hinges etc. shall be of of superior 1st quality, of standard make & Confirming to relevant BIS specification of latest edition, shade / colour of powder coating shall be as per site condition & as selected by engineer-in-charge], providing & applying 1 mm thick sunmica laminate with fevicol [sunmica & fevicol shall be of superior 1st quality, of standard make & Confirming to relevant BIS specification of latest edition. Shade / colour shall be as per site requirement & as selected by engineer-in-charge] to the entire shutter, providing; fixing & removing necessary staging / platform, collecting & disposing the generated waste & construction waste up to a lead of 2000 meters from the place of work & cleaning the work area, etc. complete all as per standard & manufacturers technical specification and as directed by engineer-in-charge at all locations and at all lift / height.

Removing of existing wood panel/veneer and Providing and fixing of 4mm thick veneer with Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed : 1] The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 no. 2] Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3] On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4] On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion (Final coat to be done in 1 or 2 layers without gap of time.), providing; fixing & removing necessary staging / platform / ladder , collecting & disposing the generated waste, construction waste up to a lead of 2000 meters from the place of work & cleaning the work area, etc. complete all as per standard & manufacturers technical specification and as directed by engineer-in-charge at all locations and at all lifts / heights. The work shall be completed as directed by the Engineer-In-Charge.

Providing and laying 18 - 20 mm thick mirror polished, Granite Slab for Kitchen platform, landing slab, selves & flooring [for flooring in approved pattern] etc. over a bedding of 20 mm thick in CM 1:4 using superior 1st quality, colour / shade [as per site requirement & and as directed by engineer-in-charge], granite stones shall be closely jointed as directed, grout filling in the joints with matching pigmented cement slurry [for joints & flooring @ 6.40 Kgs. per Sqm. of floor area], mirror polished the joints, finished to true line & levels / slope / plumb etc., including preparation of base by close hacking / roughening of existing base, racking out all the adjoining masonry joints & washing the base, curing, providing; fixing & removing necessary staging / platform [if required], collecting & disposing the generated waste & construction waste up to a lead of 2000 meters from the place of work & cleaning the work area, etc. complete all as per standard technical specification and as directed by engineer-in-charge at all locations and at all lift / height. Note: Basic rate of 18 - 20 mm thick both side mirror polished Granite Stone Slab shall not be less than Rs. 1600.00 per Sqm. (excluding GST).

Providing and laying Premium grade / 1st quality Vitrified Tiles of size 600 X 600 mm or of size as selected by Engineer-in-charge, of standard make, shade / colour [as per site requirement & as directed by engineer-in-charge] & thickness of tile shall be 9-10 mm, Tiles shall be confirming relevant BIS of latest edition, flooring with 20 mm thick in CM 1:4 [bedding] & Skirting with 12 mm thick in CM 1:3 [backing] Or using approved Adhesive [for Flooring & Skirting] pasting the Vitrified tiles on concrete or on masonry or on plastered surfaces, cement slurry shall be used @ 3.3 Kgs / Sqm. of area, close jointed [with or without spacers] as directed, grout filling in the joints with matching pigmented cement slurry, finished to true line & levels / slope / plumb etc., including cutting of tiles, recommended washing, preparation of base by close hacking / chipping the adjoining concrete / plastered surfaces, racking out the adjoining masonry joints & cleaning, curing, collecting & disposing the generated waste & construction waste up to a lead of 2000 meters from the place of work & cleaning the work area, etc. complete all as per standard & manufacturers technical specification and as directed by engineer-in-charge at all locations and at all lift / height. NOTE: Basic rate of Premium Quality Vitrified Tiles, shall not be less then Rs. 968/- per Sqm. [Excluding GST].

Providing and laying Glazed Ceramic Tiles of size & shade / colour [as per site requirement & as directed by engineer-in-charge, tiles shall of superior 1st quality, of standard make] & thickness of tile shall be 5 mm to 6 mm, for Skirting & Dado with 12 mm thick in CM 1:3 [backing] or using approved Adhesive [Skirting & Dado], pasting the glazed ceramic tiles on concrete or on masonry or on plastered surfaces, cement slurry shall be used @ 3.3 Kgs / Sqm. of area, close jointed [with or without spacers] as directed, grout filling in the joints with matching pigmented cement slurry, finished to true line & levels / slope / plumb etc., Tiles shall be confirming relevant BIS of latest edition, including cutting of tiles, recommended washing, preparation of base by close hacking / chipping the adjoining concrete / plastered surfaces, racking out the adjoining masonry joints & cleaning, curing, collecting & disposing the generated waste & construction waste up to a lead of 2000 meters from the place of work & cleaning the work area, etc. complete all as per standard & manufacturers technical specification and as directed by engineer-in-charge at all locations and at all lift / height. NOTE: Basic rate of Premium Quality Glazed Ceramic Tiles, shall not be less then Rs. 409/- per Sqm. [Excluding GST].

Providing and laying Premium grade / quality Anti-Skid Vitrified Tiles for floor, of approved brand ,size & shade / colour [as per site requirement & as directed by engineer-in-charge] Tiles shall be confirming relevant BIS of latest edition, flooring with 20 mm thick in CM 1:4 [bedding] Or using approved Adhesive pasting the tiles on concrete or on masonry or on plastered surfaces, cement slurry shall be used @ 3.3 Kgs / Sqm. of area, close jointed [with or without spacers] as directed, grout filling in the joints with matching pigmented cement slurry, finished to true line & levels / slope / plumb etc., including cutting of tiles, recommended washing, preparation of base by close hacking / chipping the adjoining concrete / plastered surfaces, racking out the adjoining masonry joints & cleaning, curing, collecting & disposing the generated waste & construction waste up to a lead of 2000 meters from the place of work & cleaning the work area, etc. complete all as per standard & manufacturers technical specification and as directed by engineer-in-charge at all locations and at all lift / height. NOTE: Basic rate of Premium Quality Vitrified Tiles, shall not be less then Rs. 440/- per Sqm. [Excluding GST].

Providing and laying/fixing Suspended False ceiling using Gypsum 12.5mm thick Boards [of approved first quality & of approved make such as of India Gypsum] with GI Grid Work made using Perimeter channels [MF 6A], Ceiling Sections [MF5 : placing at 457 mm. (Maximum) C/C] , Intermediate channels [MF7: placing @ 1220 mm. (Maximum) C/C], Ceiling angles 25 x 25 mm. Size, placing @ 1220 mm. (Maximum) C/C], Screws, soffit clefts, nuts & bolts, connecting clips, Gyp board Dry wall screws, Jointing compound, Tape and all other required miscellaneous materials & consumable [of approved first quality & of approved make, such as of India Gypsum] etc. [all materials shall be confirming to the relevant BIS specification of the latest edition], Providing & applying white cement based putty of average thickness 1 mm and One coat of Interior primer [of approved quality & make] and Two coats of plastic emulsion paint of approved shade /colour [of approved quality & make], providing; fixing & removing necessary staging/platform wherever as and when directed/required, cleaning the work area & stacking of debris upto lead of 2000 meters. etc. complete all as per specification as per manufacturer technical specification and as directed by the Engineer-in-Charge at all locations and at all lifts/at all heights.

Providing and laying/fixing in true horizontal level 600mm x 600mm False ceiling system using fine fissured ceiling tile of size 600mm x 600mm x 15mm having NRC [Noise Reduction coefficient] 0.55-0.60 minimum as per IS 8225:1987, light reflectance of 85%(minimum), thermal conductivity of 0.052 -0.057 W/m K etc., using hot dipped galvanised steel section, exposed surface with pre-coated capping with adjustable GI rods, holding cleats grid work suitably modified along the walls and beams, fixed with anchor bolts, making extra frame work around the Air conditioning ,electrical fixtures and fittings, grills, smoke detectors fixed with necessary clips etc. providing; fixing & removing necessary staging/platform wherever as and when directed/required, cleaning the work area & stacking of debris upto lead of 2000 mtrs. etc. complete all as per specification as per manufacturer technical specification and as directed by the Engineer-in-Charge at all locations and at all lifts/at all heights.

Providing and installation at all floors, heights, levels and locations of Aluminium composite panel (ACP) for cladding wall for Brick/RCC/stone walls & columns/beams over aluminium tube frame structure including fixing of sheets and filling of joints with structural silicon to acquire a smooth ripple free finish without any undulations. The composite panel sheet shall be a double layer aluminum panel consisting of a anti-toxic polythene layer core compressed between the aluminium layers. One side of the panel shall be a fluorocarbon paint finish in silver colour (as approved) with resistance to fading on exposure in exterior conditions and with a protective film on top to be removed after total completion of cladding. The sheet shall be 3mm thick of total flatness with no distortion or deflection. The sheets shall be corrosion resistant and not be affected by varying temperature variations and should resist thermal expansion. The sheets shall be fixed over aluminium framing system tubing of approved make of size 1” x 2” evenly spaced at maximum 2’ c/c to provide complete support to the sheets. The sheets shall be fixed to the framing system with double sided tape and duly anchored with maximum no. of screws All groves and finished edges. providing; fixing & removing necessary staging/platform wherever as and when directed/required, cleaning the work area & stacking of debris upto lead of 2000 mtrs. etc. complete all as per specification as per manufacturer technical specification and as directed by the Engineer-in-Charge at all locations and at all lifts/at all heights.

Providing and fixing " 304 " grade, Stainless Steel Wire mesh of 26 gauge wire & 16 meshes to an inch [16 X26 Gauge] of approved quality, make & confirming to relevant BIS specification of latest edition cleaning the work area, stacking the waste / unwanted materials, etc. Complete all as per specification, as per manufacturer's specification and as directed by Engineer-in-charge at all heights / lifts & at all locations. Note: A] The cost is inclusive of all materials and consumables like Self threading screws / bolts, nuts, beading etc. B] The contractor shall submit the sample and get the approval before bulk purchase of "304" grade, Stainless Steel Wire mesh of 26 gauge wire & 16 meshes to an inch.

Providing and fixing 20 micron thick Sun Control Film of GARWARE or equivalent make, of approved quality, of approved colour/shade & confirming the relevant BIS specification of latest edition including cutting to the required size & shape, fixing the same to the glass panel, also including providing & applying adhesive of approved quality & make, surface preparation properly by cleaning & washing the surface (base) with clean water for removal of oil, grease, dead mortar & other unwanted matters/materials, surface(base) shall be fully neat, clean & dry before fixing sun control film, providing, fixing & removing necessary staging/platform, stacking the debris/unwanted materials upto a lead of 2000 meters. outside the periphery of work premises etc. complete all as per specification, as per manufacturer's technical specification and as directed by Engineer-In-Charge at all locations and at all lifts/at all heights. Contractor shall produce delivery challan & Tax Invoice during the execution of this contract.

Providing and fixing Vertical Venetian Blinds [of 1st quality & standard make] with all necessary fittings & fixtures of approved shade / colour, of required size / length & width [width of strip shall be as per manufacturers specification], Vertical Venetian Blinds shall be of superior quality & of colour / shade [as per site requirement & as selected by engineer-in-charge] including preparation of base, collecting & disposing the generated waste, construction waste up to a lead of 2000 meters from the place of work & cleaning the work area, etc. complete all as per standard & manufacturers technical specification, drawing [if any] and as directed by engineer-in-charge at all locations and at all lift / height. Contractor shall produce delivery challan & Tax Invoice during the execution of this contract.

Providing and applying Two Coats of Acrylic Washable Distemper & applying Acrylic Wall Care Putty [wherever required / directed] over the internal Old Painted plastered surfaces / concrete wall surfaces, ceiling, RCC members such as columns; beams & other concrete surfaces etc., including preparation of base properly / neatly, base shall be fully neat; clean & dry before application of Acrylic Washable Distemper & Acrylic wall care Putty, providing; fixing & removing necessary staging / platform / ladder, collecting & disposing the generated waste up to a lead of 2000 meters from the place of work & cleaning the work area, etc. complete all as per standard & manufacturers technical specification and as directed by engineer-in-charge at all locations and at all lift / height. NOTE: Strainer of shade / colour [as per site requirement & as selected by engineer-in-charge] shall be arranged by contractor as his own cost.

Providing and applying One Coat of Interior Grade Primer & Two Coats of Interior Grade Plastic Emulsion Paint and applying Acrylic Wall Care Putty [wherever required / directed] over the internal Old Painted plastered surfaces / concrete wall surfaces, ceiling, RCC members such as columns; beams & other concrete surfaces etc., including preparation of base properly / neatly, base shall be fully neat; clean & dry before application of Interior Grade Plastic Emulsion Paint & Acrylic wall care Putty, providing; fixing & removing necessary staging / platform / ladder, collecting & disposing the generated waste up to a lead of 2000 meters from the place of work & cleaning the work area, etc. complete all as per standard & manufacturers technical specification and as directed by engineer-in-charge at all locations and at all lift / height.

Providing and applying One Coat of Interior Grade Primer [of Asian paints / Berger make / Dulux make & of superior 1st quality], and applying Base coat and top coat of Royale play Design paint of selected design Over Painted [old] Surfaces of concrete or masonry wall, RCC members such as columns; beams & other concrete surfaces including providing & filling Crack Sealing Compound in the cracks, preparation of surfaces by sand papering, cleaning the surface, surface shall be neat; clean & dry before application of crack sealing compound, Primer & Paint. Crack Sealing Compound shall be confirming to relevant BIS specification, of superior 1st quality & of standard make. Providing; fixing & removing necessary staging / platform / ladder / zoola, collecting & disposing the generated waste up to a lead of 2000meters from the place of work & cleaning the work area, etc. complete all as per standard & manufacturers technical specification and as directed by Engineer-in-charge at all locations and at all lifts / heights.

Supply of white vitreous china pedestal type water closet (European type W.C. pan) with P or 'S' trap materials shall be of standard make & of superior 1st quality and confirming to the relevant BIS specification of the latest edition] as directed by Engineer-In-Charge.

Supply of White Indian Water Closet, ORISSA PAN with P or 'S' trap materials shall be of standard make & of superior 1st quality and confirming to the relevant BIS specification of the latest edition as directed by Engineer-In-Charge.

Supply of vitreous Chinaware wall mounted Large Flat Back Urinal of Hindware / Parry ware / make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge

Supply of vitreous china Hand Wash Basin of size 575X465X200mm of Hindware/ Parry ware make white confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge

Supply of chrome finish brass concealed stop Cock with wall flange of Hindware / Parry ware make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge

Supply of chrome finish brass Health faucet with 1.5m hose pipe & hook of Hindware / Parry ware make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge

Supply of chrome finish brass wall mounted Long body bib tap of Hindware / Parry ware make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge

Supply of chrome finish brass deck mounted Pillar tap of Hindware / Parry ware make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge

Supply of chrome finish brass wall mounted Angle cock of Parryware / Kamal make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge

Supply of UPVC 32mm size Bottle Trap of approved quality & make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge.

Supply of Urinal (Push cock) of Parryware / Kamal make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge

Supply of CP Brass Urinal spreader of approved quality & make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge.

Supplying of CP Brass 2 in 1 bib Cock of approved quality & make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge.

Supplying of P.V.C. low level flushing cistern of approved quality & make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge.

PVC Flush tank 10 liter capacity - White

Supplying of 15 NB PVC Inlet connections of approved quality & make and as per the direction of Engineer-in-charge.

Supply of S.S Nahani trap with 153 x 153mm dia of approved quality & make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge.

Supply of 32 NB heavy duty PVC waste pipe of approved quality & make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge.

Supply of 32 NB S.S brass waste coupling fully threaded of parryware/Kamal make confirming to relevant BIS specification of latest edition sand as directed by Engineer-In-Charge

Supply of CPVC pipe 20mm-SDR - 11 of Astral/ Supreme make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge

Supply of CPVC pipe 25mm-SDR - 11 of Astral/ Supreme make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge

Supply of CPVC pipe 32mm-SDR - 11 of Astral/ Supreme make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge

Supply of CPVC Tee 20mm of Astral/ Supreme make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge

Supply of CPVC Tee 25mmof Astral/ Supreme make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge

Supply of CPVC Tee 32mm (ISI Standards)of parry ware / cera/ prestige / of approved colour and as directed by Engineer-In-Charge

Supply of CPVC Elbow 25mm of Astral/ Supreme make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge

Supply of CPVC Elbow 32mm of Astral/ Supreme make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge

Supply of CPVC Reducer Bush 25 X20mmof Astral/ Supreme make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge

Supply of CPVC Reducer Bush 32 X 25mmof Astral/ Supreme make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge

Supply of heavy duty automatic Hydraulic door closer of approved brand and make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge

Supply of CPVC Clamp 20mm dia of Astral/ Supreme make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge

Supply of CPVC Clamp 25mm dia of Astral/ Supreme make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge

Supply of CPVC Clamp 32mm dia of Astral/ Supreme make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge

Supply of 25mm CPVC End cap of Astral/ Supreme make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge

Supply of 32mm CPVC End cap of Astral/ Supreme make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge

Supply of 20mm CPVC F.T.A of Astral/ Supreme make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge

Supply of 25mm CPVC F.T.A of Astral/ Supreme make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge

Supply of 32mm CPVC F.T.A of Astral/ Supreme make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge

Supply of 20mm CPVC M.T.A of Astral/ Supreme make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge

Supply of 25mm CPVC M.T.A of Astral/ Supreme make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge

Supply of 32mm CPVC M.T.A of Astral/ Supreme make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge

Supply of 20mm CPVC Socket of Astral/ Supreme make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge

Supply of 25mm CPVC Socket of Astral/ Supreme make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge

Supply of 32mm CPVC Socket of Astral/ Supreme make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge

Supply of 20mm CPVC Union of Astral/ Supreme make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge

Supply of 25mm CPVC Union of Astral/ Supreme make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge

Supply of 32mm CPVC Union of Astral/ Supreme make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge

Supply of 32 X 25mm CPVC Reducer Tee of Astral/ Supreme make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge

Supply of solvent for CPVC/UPVC pipes and fittings of approved make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge

Supply of Bewelled finish bathroom glass mirror make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge

Supply of Toilet seat cover of parryware/Hindware make of approved shape and colour confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge

Supply of 36W LED 2'x2' panel of white light with recessed panel for false ceiling of Panasonic or make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge

Supply of 10W LED round 150mm dia ceiling mount of Panasonic make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge