Nuclear Power Corporation Of India Limited Tender

Providing & Constructing Masonry with approved C. C. Solid Blocks of size 400 X 200 X 200 mm / 300 X 200 X 200 mm, having crushing strength not less than 45 Kgs/cm2 and confirming to the BIS 2185 part-I of the latest edition, in CM 1:5 for foundations, trenches, walls, drains, plinths and all other miscellaneous masonry works etc. including simultaneous flush pointing, curing, preparation of base by close hacking / chipping the concrete / plastered surfaces, racking out the adjoining masonry joints & cleaning, providing; fixing & removing necessary staging / platform / ladder, collecting & disposing the generated waste, up to a lead of 3000 to 4000 mtrs. from the place of work & cleaning the work area, etc. complete all as per standard technical specification, drawing [if any] and as directed by engineer-in-charge at all locations & lifts / heights.

Providing and laying Cement Plaster, 15 mm thick for internal surfaces of walls and columns in CM 1:5, rubbed perfectly so as to obtain smooth and even finish including preparation of base by closed hacking / chipping the concrete / plastered surfaces; racking out the adjoining masonry joints and cleaning, curing, providing; fixing removing staging / platform, collecting and disposing the generated waste upto a lead of 3000 meters from the place of work & cleaning the work area etc., complete all as per standard technical specification and as directed by the engineer-in-charge at all locations and at all lifts/heights.

Providing & laying RCC of grade 1:1.5:3 using 20mm & downsize clean, crushed, well graded aggregates of hard ,durable &approved quality of RCC work including mixing,transporting,laying,spreading,consolidation,leveling,finishing,curing,preparation ,fixing and removing staging/platform, collecting & disposing the generated waste upto a lead of 3000 mtrs from the place of work and clean the work area .complete all as per standard technical specifications, drawing (if any)and as directed by engineer-in-charge at all location and at all lifts/height. note-OPC-43 grade cement of reputed brand/make & as approved by EIC shall be used complete all as per standard technical specifications, drawing (if any)and as directed by engineer-in-charge at all location and at all lifts/height.

Providing and laying approved make High Yield Strength Deformed Reinforcement bars of all diameters confirming to the grade Fe - 500 of IS:1786 including cutting, bending, transporting, placing in position & binding with 16 gauge soft annealed binding wire of approved quality & of approved make for RCC works providing & placing spacer bars, cover blocks providing; fixing & removing necessary staging / platform, complete all as per specification, as per manufacturer's specification and as directed by the Engineer-in-charge at all locations and at all lifts . Note: The rate shall be inclusive of Binding wire and cover blocks and will not be measured separately for payment.

Providing ,placing & removing formwork for all concrete work including providing, fixing,& removing staging ,platform collecting &disposing the generated waste up to a lead of 2-3kms Note- measurement shall be made for formwork in contact with concrete surface.

Providing and filling the Selected & good quality Earth brought from the borrow pits and filling in Low laying areas, plinth, road berms & drain sides etc., to the required gradient, camber & watering properly and compacting the each layer by using portable hand compactor, collecting & disposing the generated waste up to a lead of 3000 mtrs. from the place of work & cleaning the work area, etc. complete all as per standard technical specification, drawing [if any] and as directed by engineer-in-charge at all locations and at all lift / height.

Providing, fixing / placing in position Rotary Press; Heavy Duty; Anti skid; 5Star; Paver Blocks of 55 mm thick [of standard size & in colour combination of terracotta & black and as selected by engineer-in-charge] of standard make & of 1st quality. Paver blocks compressive strength shall not be less than 300 Kg/ Sqcm and manufactured as per IS 15658-2006, Paver shall be laid over well Saturated 50 mm. thick River Sand / M sand bedding including preparation of base by proper dressing / leveling and ramming [using Plate Vibrator to have uniform surface and to get the required line & level / gradient, camber] the base with proper watering, the gaps shall be filled with fine sand, ramming top surface of pavers using Plate Vibrator to have uniform surface and to get the required line & level / gradient & camber, collecting & disposing the generated waste, construction waste up to a lead of 2 to 3 kms. from the place of work & cleaning the work area, etc. complete all as per standard & manufacturers technical specification and as directed by engineer-in-charge at all locations and at all lift.

Fabricating gates, hand rails, frames of panels doors, windows & shutters, shutters, purlins, rafters horizontal / vertical / cross members, columns, beams, trusses and all other miscellaneous new & modification to existing structure/s including Providing standard MS Steel Sections which are required for executing this work and fixing erecting the same in position to true line level & plumb, preparation of base, providing & fixing hilti bolts [of approved quality] of suitable dia. & length, preparation of base, providing & painting One Coat of approved Zinc Phosphate Primer of Asian paints Berger make and Two Coats of first quality synthetic enamel paint of Asian paints / Berger make, of approved shade / colour etc., providing; fixing & removing staging / platform / ladder, collecting & disposing the general waste up to a lead of 3000 meters from the place of work & cleaning the work area, etc. complete all as per standard & manufacturers technical specification, drawing [if any] and as directed by engineer-in-charge at all locations & lifts / heights.

Providing and fixing in position20 - 22 mm. thick, Kota Stone Slabs / Tiles of approved quality; of approve shaded / colour & one side Mirror Polished. Laying / fixing in approved pattern for FLOORING to the true line; level & slope . including Tiles using cement mortar in 1:4; 20 mm. thick bedding, colouring pigment to match the existing surface, preparation of base & curing properly, Polishing the joints using polishing machine / polishing stone, cleaning the work area & disposing the debris / waste materials / unwanted materials / things etc., upto a lead of 50 meters outside work premises etc. complete all as per specification and as directed by the Engineer-in-charge at all locations and at all height / lifts. Note: Basic rate of 20 - 25 mm. thick, Kota Stone Slabs / Tiles shall not be less than 395.00 per Sqm.

Dismantling of old existing flooring and Providing & fixing in position Granite flooring Slabs / Tiles of approved quality; of approve shaded / colour & one side Mirror Polished. Laying / fixing in approved pattern for FLOORING to the true line; level & slope . including Tiles using cement mortar in 1:4; 20 mm. thick bedding, coloring pigment to match the existing surface, preparation of base & curing properly, Polishing the joints using polishing machine / polishing stone, cleaning the work area & disposing the debris / waste materials / unwanted materials / things etc., upto a lead of 50 meters outside work premises etc. complete all as per specification and as directed by the Engineer-in-charge at all locations and at all height / lifts.

Supplying installing and commissioning of floating fountain of SS floatter 4ft (submersible pump : open well 7.5 HP kirloskar make) ,height of water flow of fountain 8ft-10ft controlled with valves,3"nozzels,36w RGB led light with remote controlled, control penal for pump & light, with all installation and electrification charges. complete all as per the standard technical specifications, as per manufacturer's technical specification and as directed by the engineer-in-charge at all locations & at all heights & lifts.