North Western Karnataka Road Transport Corporation Tender

Supplying erection installation testing and commissioning of 500 lph capacity fully automtic with automtic back wash drinking water unit with reverse osmosis and with a 1000 litres storage tank made of SS 304 food graded stainless steel along mounting acessories and swapping cars operated vending future with allied penal board including AMC for period of 3 years with periodical visit to the RO plant including changing the comsumables anti trail running for a period of 90 days including training the NWKRTC personnel for handling the unit. a) Raw water transfer pump with moter make angel/equiv with auto stop 500 lph @ 2.5-1.00 kg/sqcms b) Duel media filter with manually operated multport valve 10" x 54" c) Micron cartridge filter PP Spum-20" 500 LPH d) High pressure pump 1000 LPH @ 11 Kg/Sqcm e) RO membrance 4.00"sal x 40" length f) RO Pressure tube 4.00" dal x 40" length g) RO skid h) RO water storage tank 1000ltrs capacity SS 304 food graded stainless steel water storage tank. i) Interconnection piping j) pressure gauges k) Pressure switch l) TDS meter

Providing & fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) Composite Pressure Pipes conforming to IS 15450 duly “ISI” marked, U.V. stabalized with Carbon black for hot & cold water supply, capable to withstand temperature upto 80°C including all special composite fittings (engineering plastic blend and brass inserts wherever required.) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 meter spacing, cutting & making good the walls etc., including testing complete as required. (Internal work) Pipes exposed on wall - 2532 (32 mm OD) Pipe (95/13.82.4)

KSRB 7.15 : Providing, fabricating, assembling and fixing in position aluminium partitions using aluminium sections of mat finish or glassy finish in combination of plain grove, single grove and double grove as per requirements for the frames of overall size 63.5mm x 38.1mm. with thickness of 2mm. having section weight, plain sections 1.054kg/m, single grove thickness 1.95mm. section weight 1.094kg/m, double grove thickness 1.9mm section weight 1.094kg/m and bottom member 114.3 mm. x 44.45mm. thickness 3.18mm. weight 2.646 kg/m; aluminium louvres section of size 36.5mmx34.93mm 1.45mm. thick section weight 0.429kg/m; bottom portions provided with 12mm. thick prelaminated sheet both sides of approved colour lamination exterior grade upto 0.9m height, spacing of vertical member not exceeding 0.6 m. c to c; sections are cut to the required lengths, joints mitered and corners grinded subdividing frames tennoned and rivetted to the frames; the assembled frame stiffened with corner angles, stripped and fixed with screws, rawl plugs and teak wood gutties to R.C.C.columns on sides, R.C.C. lintels or beams at top and floor at bottom, including cutting chistelling and making good with cement mortar to match the surface; providing and fixing 5.5mm. thick plain glass for middle portion viz., 0.9m. to 2.13 m. and top panel with louvres sections; the glass and panels fitted with glazing clips of 19mmx17.3mm. of thickness 0.9mm. weight 0.124kg/m, aluminium sections treated for removal of any rust and prevention of further rust formation, coated with greasy materials for non-adherence of mortars or any other sticky materials; vertical members embedded in the flooring by making suitable sized holes and fixing with cement mortar, with necessary opening for fixing of door of standard size (excluding cost of door ) all the frame thoroughly cleaned, free from rust, scale or dirt including cost of materials, fixtures, labour and HOM of machinery complete as per specifications. - using aluminium section anodized to 12 15 microns. (36/7.15.1)