North Western Karnataka Road Transport Corporation Tender

KSRB 4-1.3 : Providing and laying in position plain cement concrete of mix M7.5 with OPC cement @180kgs, with 40mm and down size graded granite metal coarse aggregates @ 0.85 cum and fine aggregates 0.57cum machine mixed, concrete laid in layers not exceeeding 15 cms. thick, well compacted, in foundation and plinth , including cost of all materials, labour, HOM of machinery, curing complete as per specifications. Specification NO. KBS 4.1, 4.2 SRP 12/4.3

KSRB 2.3 : Filling Available earth ( excluding rock ) in sides of foundations upto plinth in layers not exceeding 20cms. In depth, compacting each deposited layers by ramming afer watering with lead upto 50m. And lift upto 1.5m including cost of all labour completeas per specifications. SRP 6/2.10

Earth work excavation in soil deposits and filling to the foundation and basement with approved new earth with an initial lead of 50m including watering and temping layers of 15cms thick etc., complete (Page No. 6 Item No. 2.12)

KSRB 4.2.2 : Providing and laying in position reinforced cement concrete of mix M25 with OPC cement @320kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.878cum and fine aggregates 0.459cum with superplastisiser @ 3lts confirming to IS9103-1999 Reaffirmed-2008, machine mixed, concrete laid in layers not exceeeding 15 cms. thick, vibrated for all works in foundation plinth and ground floor level for roof slabs, staircase, lintels, retaining walls, return walls, walls (any thickness) including attached plasters, columns, piers, abutments, pillars, posts, struts, butresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window cills, fillets etc., including cost of all materials, labour, HOM of machinery, curing complete as per specifications. Specification specification No. KBS 4.11, 4.6 SRP 13/4.12

KSRB 4.2.2 : Providing and laying in position plain cement concrete of mix M15 with cement @ 240kgs, with 20mm down size graded granite metal coarse aggregates @ 0.878cum and fine aggregates @ 0.459cum, machine mixed, concrete laid in layers not exceeding 15cms, thick. well compacted, in foundation , plinth and cills, including cost of all materials, labur HOM of machinery, curing complete as per specifications. SRP 12/4.6

KSRB 4.2.10 : Providing and laying in position reinforced cement concrete of mix 1:1.5:3 ( M20) with 12mm and down size graded granit e metal, machine mixed, well compacted for plain chajja of 7.5 cms. Average thickness, upto ground floor level, including cost of all matrials, labour, HOM of machinery , finishing, curing complete as per specifications. specification No. KBS 4.1,4.6 SRP 15/4.19

KSRB 4-6.10 :Providing and removing centering, shuttering, strutting, propping etc., for chajjas, corbels etc., including edges including cost of all materials, labour complete as per specificaiton.Specification No. KBS 4.6.2 (pg.no./16/4.37)

KSRB 4-6.5 : Providing and removing centering, shuttering strutting, propping etc., for foundations, footings, bases of cloumns for mass concrete including costof all material, labour complete as per specification No. KBS 4.6.2 SRP 16/ 4.28

KSRB 4-6.3 : Providing and removing centering, shuttering structting, propping etc., and removal of form work for flat surface such as suspended floor, roofs, landing, balconies and lides, thickness upto 200mm including cost of all materials, labour complete as per specifications. No. KBS 4.6.2 SRP 16/ 4.30

KSRB 4-6.5 : Providing and removing centering, shuttering strutting, propping etc., for columns, pillars, piers, abutments, post and struts, square / rectanglar / polygon in plan including costof all material, labour complete as per specification No. KBS 4.6.2 SRP 16 / 4.32

KSRB 4-6.5 : Providing and removing centering, shuttering strutting, propping etc., for columns, pillars, piers, abutments, post and struts, CIRCULAR OR Curved Colmn in plan including costof all material, labour complete as per specification No. KBS 4.6.2 SRP 16 / 4.33

KSRB 4-6.2 : Providing and removing centering, shuttering structting, propping etc., and removal of form work for sides soffits of beams, beam haunchings, cantilever girders, bressumers and lintels exceeding 1m in depth including cost of all materials, labour complete as per specification No. KBS 4.6.2 SRP 17/4.34

KSRB 4-6.9: Providing and removing centering, shuttering, strutting, propping etc for edges of slabs and breaks in floor, Sills, plinth including cost of all materials, labour complete as per specification. Specification SRp 16/4.36

KSRB 4-6.7 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for vertical surface such as walls at any thickness, including attached pilasters, plinth and string courses including cost of all materials, labour complete as per specificaitons. SRP 16/4.31)

KSRB 4-6.11 : Providing and removing centering, shuttering propping etc., and removal of form work for stairs ( excluding landing) except spiral staircase including cost of all materials, labours complete as per specification SRP 17/4.38

Providing RCC loft (atta) 7.5 cms thick with reinforced cement concrete of mix ( M20) graded granit 20mm down size jelly machine mixed with nessary reinforcement at 20cms center to center as per design including form work centering curing, cost of all matrials, labour, HOM of machinery , finishing, curing complete as per specifications. SRP 20/4.54

Providing and fixing RCC Slabs 5 cms thick for wall shelves with 12mm and down size graded granite jelly reinforced cement concrete design mix including CM 1:3 plaster finishing curing etc complete (excluding cost of steeland febrication charges) complete as per specifications. SRP 20/4.55

Providing Flooring with 25mm to 40mm thick cadapa slabs using cement mortar 1:6 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slury mixed with pigment to match the shade of the slab: including cost of materials, labour curing complete as per specifications. (SRP 105/14.17 )

KSRB 4.9.2 : Providing T.M.T steel reinforcement for RCC work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchiring to the adjoining members wherever necessary complete as per design (laps. hooks and wastage shall not be measured and paid) cost of materials labour, HOM of machienry complete as per specifications, SRP 19/ 4.46.2

KSRB 5.4-3 : Providing and constructing laterite stone size stone masonry with cement mortor 1:6, edges of stone chisel dressed in course not less than 15cm hight, bond stone at 2mt apart in each course including cost of materials,labour,curring etc compleet as per specification.

KSRB 5.4-3 : Providing and constructing laterite stone size stone masonry with cement mortor 1:6, edges of stone chisel dressed in course not less than 15cm hight, bond stone at 2mt apart in each course including cost of materials,labour,curring etc compleet as per specification.

KSRB 15.3.5 : Providing 15 mm thick cement plaster in single coat with CM 1:4 to brick masonary including rounding off corners wherever required smooth rendering : providing and removing scaffolding, includignn cost of materials, labour, curing compelte as per specification 115/15.13

KSRB 15.3-8 : Providing 18 mm thick cement plaster in single coat with CM 1:4 brick masonary including rounding off corners wherever required smooth rendering : providing and removing scaffolding, includignn cost of materials, labour, curing compelte as per specification 116/15.16

KSRB15-3-14 : Providing 12mm thick cement plaster in single coat with cement mortar 1:4, to ceiling including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. SRP 113/15.22

Providing and fixing 0f 2 track x 2 panel sliding windows shutters made out of multi chambered UPVC (Matching to RAL -9016) sections with minimum TiO2 (Titanium Dioxide )at 6PHR with TPV(Thermo Plastic Vulcanized ) and lead free gaskets grey colour having isolated drainage and reinforced with galvanized iron profile through out the window frame the outer frame having a overall size of 50mm width x 42 mm height with reinforcement of 1mm thickness and sash with overall size of 31mm x57mm with gi reinforcement of 1mm for the frame and 1.5 mm for the sash glazing bead for fixing of glass shall be of size 21 .5mm x9.5mm windows shall be providedwith 5mm plain float glass standard hard were & single point locking system with touch lock wall thickness of frame &sash shall be of 1.8 +-0.2 mm Maximum possible size 1519mm x 1519mm SRP 308/38.44.3

Providing fabricating assembling and fixing in position anodized aluminium partitions using aluminium sections of mat finish or glassy finish in combination of plain grove, single grove and double grove as per requirements for the frames of overall size 63.5 mm X38.1 mm with thickness of 2 mm having section weight, plain sections 1.054 Kg/m, single grove thickness 1.95 mm section weight 1.094 Kg/m, double grove thickness 1.9mm section weight 1.094 Kg/m and bottom member 114.3 mm X 44.45 mm thickness 3.18mm. weight 2.646 Kg/m aluminium louvres section of size 36.5mm X 34.93mm 1.45 mm thick section weight 0.429 Kg/m bottom portion provided with 12mm thick prelaminated sheet both sides of approved colour lamination exterior grade upto 0.9m height spacing of vertical member not exceeding 0.6 m C to C sections are cut to the required lengths, joints mitered and corners grinded subdividing frames tennoned and rivetted to the frames : the assembled frame stiffened with corner angles, stripped and fixed with screws, rawl plugs and teak wood gutties to RCC columns on side RCC lintels or beams at top and floor at bottom, including cutting chistelling and making good with Cement mortar to match the surface , Providing and fixing 5.5mm thick plain glass for middle portion viz., 0.9m to 2.13 m and top panel with louvres sections : the glass and panels fitted with glazing clips of 19mm X 17.30 mm. of thickness 0.9mm weight 0.12 kg/m aluminium sections anodised 12 to 15 microns, sections treated for removel of any rust and prevention of further rust formation, coated with greasy materials for non adherrence of mortars or any other sticky material: vertical members embadded in the flooring by making suitable sized holes and fixing with cement mortar, with necessary opening for fixing of door of standard size (excluding cost of door) all the frame throughly cleaned , free from rust , scale or dirt including cost of materials fixture labour and HOM of machinery complete as per specification (SRP 38/7.15.2) Using aluminim section powder coated

KSRB 7.16: Providing fabricating assembling and fixing in position anodized aluminium shutters to the existing door frame in the partition using 47.62x44.45mm section thickness 3.18mm, weight 1.505kg/m for vertical frame 47.62x44.45 thickness of 3mm weight 1.42kg/m for top section 49.91mmx44.45mm with wall thickness 3mm weight 1.495kg/m for central rail and 114.3mmx44.45mm thickness 3.18mm, weight 2.64kg/m for bottom rail aluminium sections anodized 12 to 15 microns and cut to length joint metred and corners grinded the bottom rail and top rail hinged or pivoted opening arrangements including providing and fixing standard approved accessories such as aluminium handles tower bolts lock pivots hinges PVC or rubber gasket 12mm prelaminated sheets (Novopan) exterior grade of approved colour both sides same colour for bottom panel of maximum height 0.90m and 5.5mm thick plain glass for top panel (Novopan) and glass fixed with glaed clips 19mmx17.3mmx11mm 0.9mm thick weight 0.124kg/m aluminium sectionn treated for removal of any rust and prevention of further rust formation and coated with greasymaterials for non-adherance of mortars or any other stickly materials including cost of materials fixtures labuor and HOM of machinery complete as per specifications. SRP 38 /7.16.2 Using aluminim section powder coated

Providing, and fixing STAINLESS STEEL HAND RAIL rail 14 gauge pipes for ramps or staircase made out of stain less steel hollow pipes,using 50mm dia for vertical at 1.60 mtr C/C are fixed tot he ramp or steps by drilling with bolts and 100mm dia MS base plates 10mm guage for fixing of vertical pipes 4 Nos anchor bolts & 40mm dia pipes are fixed horizontally for two rows top,one pipes are fixed with vertical pipes another one are fixed elbows and 25mm dia pipes are horizontally for two rows top measure at equal intervals inc cutting welding bending wherever neccessary with suitable caps at tops btm and corners finishing with mat / shining etc complete inc cost and convinience of all materials,labour for all items of work HOM of equipement with all lead and lift, loading and unloading,transportation Charges and all other incidental charges etc direction Engineer In charge. (SRP 45/7.39)

SRP 61/9.90.1 Providing and fixing factory made splendoor of solid core single leaf rigid composite polymer laminated sal wood, door shutter of required thickness, manufactured out of solid core door conforming to IS 2202 (Part-1) 1991, laminated with 0.8 mm thick polymer, termite, water resistant and fire retardant with superior gluing based on vacuum lamination technology and with various pre moulded design on both faces conforming to IS 6307-1985, using adhesive conforming to IS 4835-1979 and door shuters tested in conformation to IS 4020-1994. The finish of shutters will be TEADK/OAK/CEDAR/ROSE WOOD/ WALNUT, plain colurs WHITE/IVORY/BEIGE/LIGHT GREY. Excluding cost of fixtures and inclusive of supply of shutters to respective work spot. with door shutter 30mm thick

KSRB 9.4-3 : Providing Matti / Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves wrought, framed or assembled including making plaster groves ( excluding cost of cement concrete and side clamps ), but including cost of materials, labour HOM of machineries complete as per specification. Specification No. KBS 9.33 SRP 56/9.12

Providing and fixing 65mmx90mm GRP doorframe fabricated using E Glass chopped strand Mat ( CSM) U.V stablized Isopthalic Gelcoat and Isopthalic resin. The thickness of the GRP skin shall not be less than 2.0mm. The doorframe consists of four segmens, which are provided with plug-in-socket arrangement in situ in the mould. the segments are plugged in and are joined together by means of screws. the GRP frame shall be provided with wooden reinforcement of 6 locations fro high screw holding capacity for fixing metallic hold fast and shall be consolidated by filling with medium density foam/ plaster with fibre reinforcemetn. six numbers of 260mm x 25mmx5mm size "S" shaped M.S flat hold fast be provided wtih the frame. SRP 63 / 9.95

Providing and fixing factory made single leaf rigid GRP sandwich composite door shutter of 32mm thick, laminated with two GRP skins with wood grain finish, fabricated using U.V -stabilized Isopthalic Gelcoat and on layer of 450 gsm E Glass chopped strand Mat ( CSM), impregnated with orthopthalic polyster resin. the thickness of the skins shall not be less than 1.5mm. expanded polystyrence (EPS) structural foam panel of 29mm thickness and a density of 20 Kg/m3 shall be used as core material. wooden reinforcemetns made of seasoned salwood block of cross section not less than 28mmx32mm and also necessary salwood reinforcement for fixing the metal fittings such as tower bolts, aldrops. handless etc., shall be provided. a structural adhesive compatible with EPS foam shall be used for bonding the core material, the Salwood reinforcemetn and the skins. the material and process for manufacturing the door shutters shall confirm to RV / TIFAC composites design centre standards and specification and the door shutters tested in confirmation to IS 4020-1994. the finish of shutters will be plain colour white/ivory/beigh/light grey or any other colour uisng high quality pigments.exclusing cost of fixtures and inclusive of supply of shutters to respective work spot. SRP 62 / 9.93

KSRB 7.9 : Providing and fixing M.S. grill work for windows and ventilators weighing 21 kg/ sqm using M.S flats, or M.S square approved design, drawing including cutting steel sections and welding the same to required pattern with a coat of red lead primer, cost of materials, fixtures, labour and HOM of machinery complete as per specifications. No. KBS 7.12 SRP 34/7.9

Providing and laying floring using pre polished gang saw/ water cut 19mm thick granite laid with a bed of 20mm thick 1:4 cm & jointed with neat cement slurry mixed with pigment to mach shade of granite slabs including laying POP on finished surface and cleaning the surface, including the cost of all materials mortar and labour etc., complete as per specifications. for using 19mm thick Raw Silk/ Black pearl granite of width not less than 900mm (Page No. 110/14.47.5)

Providing and fixing special make galzed vitrified tiles ( Granomite finish) of approved make, quality and colour of size 600x600x10mm thick fixed on existing flooring with a special roffe adhesive for flooring and skirting etc., complete including providing spears at required interval and removing stains etc., cmplete. SRP 109/14.43

KSRB 14.10-1 : Providing flooring with 25mm to 40mm thick polished tandur slab using CM 1:6 25mm thick over existing CC bed or of roof laid to line and level and jointed with cement slurry mixed with pigenment to match the shade of the slab, including cost of materials, labour, curing shade of the slab, including cost of materials, labour, curing polishing compelete as per specification. SRP 105/ 14.15

Providing and laying floring using pre polished gang saw/ water cut 19mm thick granite laid with a bed of 20mm thick 1:4 cm & jointed with neat cement slurry mixed with pigment to mach shade of granite slabs including laying POP on finished surface and cleaning the surface, including the cost of all materials mortar and labour etc., complete as per specification. for using silver grey granite/Multy Red/ Ruby Red/ Black/ Hassan Green/ River Pink Granite of width not less than 1200mm (Page No. 109/14.47.1)

KSRB 14.14-5 : Providing Ceramic tiles of size 30X30cms for flooring, treads of steps and landings laid on a bed of 12mm thick, cement mortar 1:3 mix, flush pointing with white cement using clolour pigment including cost of materials, labour curing complete as per specifications. Specification No. KBS (SRP 108/14.36.2)

KSRB 14-17.2 : Providing skirting, dado, rised of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over rough plaster surface ( excluding cost of rough plastered surface which should be measured and paid separately using glazed tiles of approved make and size including cost of materials, labour, complete as per specification. SRP 108/14.41.3

Providing and laying/fixing cement base, precast, pre polished cement concrete, designer tiles 25mm thick conforming to IS 1237 heavy duty tiles for flooring, treads of steps and landing, laid on a bed of 12mm thick cement mortar 1:3 mis finished with flush pointing using white cement, including cost of materials, including cutting, griding the edge to half/full round wherever required, labour, curing complete as per specification. SRP 112/14.62

Providing and applying two coats of wall putty to inside plastered wall and ceiling using white cement putty. Scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers, including cost of all materials, cost of labour and scaffolding etc., complete as per specifications. SRP 128/15.106

KSRB 15-17.6 : Providing and applying painting two coats on new wood surface and / or wood based surface with enamel paint to give an even shade, cleaning the surface of all dirt, dust and foreign matter sand papering including cost of materials, labour, compelte as per specifications. SRP 121/ 15.60.1

Providing and applying two coats with oil bound washable distemper of approved brand and shade on wall surface including priming coat with distemper primer after throughly brooming the surface free from mortar drops and other foreign matter including preparing the surface even and sand paper smoth, cost of materials, labour, complete as per specifications, SRP 119/ 15.49.1

Providing and finishing External walls in two coats over one coat of primer with antifungal paint of approved brand and shade to give an even shade after thoroughly brooming the surface remover all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour complete as per specifications.SRP127/15.104

KSRB 9-27.1: Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfasts in cement concrete 1:3:6 of 20mm and downs size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal off the debris with lead up to 50m including cost of materials, labour charges, complete as per specification SRP 60 /9.80

KSRB 6-8.1 : Construction of partition wall 10 cms thick with ground moulded modular burnt bricks of class designation 35 with cement mortar 1:4 including providing and fixing plaster mesh manufactured out of hot dipped gelvanised iron of nominal thickness 0.35mm 100mm wide as per I.S. 2212/1991 at 7.5 m c to c including cost of materials, labour charges, scaffolding, curing complete as per specifications. Specification No. KBS 6.2 (SRP 31/6.27)

Providing and fixing 0f Louvered ventilators made out of multi chambered UPVC (Matching to RAL -9016) sections with minimum TiO2 (Titanium Dioxide )at 6PHR with TPV(Thermo Plastic Vulcanized ) and lead free gaskets grey colour having isolated drainage and reinforced with galvanized iron profile through out the ventilators frame the outer frame having a overall size of 39mm width x 39 mm height with reinforcement of 1mm thickness and louver clip in aluminium (powder coated in white ) will be used on the frame along the plastic parts for fixing the 4 mm pin head glass wall thickness of frame 2 mm Maximum possible size 1000mm x 1000mm SRP 308/38.44.2

Supplying and fixing approved Aluminium Handles 15cms (378/XV)

Supplying and fixing approved Aluminium Hinges 75mms length (379/XV)

Supplying and fixing approved iron oxidised 5" Hinges Heavey duty (XV/390)

Supplying and fixing approved Tower Bolts 300mm long(XVI/407)

Supplying and fixing approved Tower Bolts 200mm long(III/80)

Disposal of unwanted excavated earth and debries from Staff Qtrs premises including loading and unloading with all lead and lifts as per the direction of Engineer-in-charge. SRP 144/19.20

KSRB 5.3-3 : Providing and constructing granite / trap / basalt size stone masonry in basement with cement mortar 1:6, edges of stones chistle dressed in courses not less than 15 cms high, bond stones at two m. apart in each course including cost of materials, labour, curing complete as per specifications. SRP 25/5.9

Providing grooves in plastering on walls 2.50 to 4.00 cms wide and to the required depth as per design and finished in cement mortar (1:3) including curing etc., complete.

KSRB 5.4-3 : Providing and constructing laterite stone size stone masonry with cement mortor 1:6, edges of stone chisel dressed in course not less than 15cm hight, bond stone at 2mt apart in each course including cost of materials,labour,curring etc compleet as per specification.