North Western Karnataka Road Transport Corporation Tender

code04 - Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 13.50.4 32 mm nominal dia Pipes CSR2023-24/Vol.5/P112/10.1.2

code05 - Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per direction of Engineer-in-charge. CSR2023-24/Vol.2/P193/19.55

code06 - Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. CSR2023-24/Vol.2/P41/8.3.2

code07 - Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: 20.2.1 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/Sqm) CSR2023-24/Vol.2/P197/20.2.1

code08 - Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.. CSR2023-24/Vol.2/P121/13.26

code09 - Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 g. CSR2023-24/Vol.2/P121/13.26

code10 - Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. CSR2023-24/Vol.2/P46/8.30

code11 - Engaging labours for cleaning roof and crew rest room premises . CSR2023-24/Vol.1/PA-50/5

code12 - Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 CSR2023-24/Vol.2/P119/13.12

code13 - Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g CSR2023-24/Vol.2/P137/14.40.2

code14 - Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 8 mm thickness (weight not less than 20 kg/ Sqm) including cost of materials, labour, usage charges of machinery complete as per specifications. CSR2023-24/Vol.2/P89/11.37.3

code15 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 13.31.1 15 mm nominal dia Pipes m 182.00 13.31.2 20 mm nominal dia Pipes m 242.00 13.31.3 25 mm nominal dia Pipes CSR2023-24/Vol.2/P121/13.31.3

code16 - Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading,transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge to the appropriate disposal area. CSR2023-24/Vol.2/P193/19.59

code17 - Providing and fixing in position Mathi/Nandi wood half panelled shutters at bottom and half glazed at top for window shutters with stiles and rails of 35mm thick, 75mm wide in two halves with panels of 25mm thick, 3mm thick reeded glass for top panels fixed with wooden beading including cost of materials, labour charges, usage charges complete as per specifications. (excluding cost of fixtures) CSR2023-24/Vol.2/P102/12.37

code18 - Desilting of sewerlines by mechanical (Jetting,Sucking,Grabber,Scrap per etc.,) means ,setting up the over pumping arrangements,rodding and dislodging of accumulative silt from the pipeline ,removal of silt by mechanical means to the ground including barricading, cleaning of sewers and machinhole, disposal of removed silt upto a distance of 20 Kms, necessary all complete as per the instructions of the Engineer-in-charge. 16.57.1 upto 300mm dia CSR2023-24/Vol.5/P207/16.57.1

code19 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: .7 PVC pipes 110mm dia., 6 kg/sqcm & class 3 CSR2023-24/Vol.2/P113/10.1.7

code20 - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. CSR2023-24/Vol.2/P148/15.2