New Mangalore Port Trust Tender

Dismantling of Y type R.C.C Fencing poles of size 0.20 mts x 0.15 mts x 3.00 mts posts, foundation concrete, back filling of pit by manual means including disposal of dismantled material with all lifts and lead, stacking serviceable material and unserviceable material separatly.

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenances required to complete the work.

Carriage of materials: A : Cost of Haulage Excluding Loading and Unloading: Case-1 : Surfaced Road : Taking output 10 t load and lead 3.50km

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/ rap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications : Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates

Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement: 6 coarse sand)

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including Form work / centering/ shuttering etc. all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples - For Super structure in CM 1:6.

Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement complete as per drawing and technical specification-

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per direc tions of Engineer-in-charge

Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 m openable length ( total length 90 m), having 50 nos rounds per 6 m length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/mm2 with tape (0.52 mm thick) and weight 43.478 g/m excluding cost m (cost of M.S. angle, C.C. blocks shall be paid separately)of G.I. angle with hot dip galvanization and including fixing Charges etc., wires coil , labours and all incidental charges as directed by Engineer.

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and excluding a priming coat including of dip galvanisation to the fabricated MS angle with thickness of 85 Microns ( Including shot blasting the components before dipping and pickling in Acid) all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge

Credit for taking away (Buy back) all the salvage materials of barbed wire / G.I mech Scrap / Iron Scrap inclusive of cost of labour, T & P, and all other incidental charges etc. complete as directed by the department.

Credit for taking away (Buy back) all the salvage materials of Fencing R.C.C pole inclusive of cost of labour, T & P, and all other incidental charges etc. complete as directed by the department.