Mysore University Tender

MCM04 - 1GE SFP SX transceiver module for all systems with SFP and SFP/SFP+ slots

MCM05 - 10GE SFP+ transceiver module, short range for systems with SFP+ and SFP/SFP+ slots

MCM06 - Upgrade license for adding 5 GB/Day of Logs.

MCM07 - Premium Support (for 1-6 GB/Day of Logs)

MCM08 - Cat 6 Cable Dlink 23awg as per technical Specifications

MCM09 - Cat 6 Patch panel as per specifications

MCM10 - Cat6 Information outlet as per technical Specifications

MCM11 - Cat6 Face Plate as per technical Specifications

MCM12 - Ca6 2 Mtrs Patch cords as per specifications

MCM13 - Network Rack 9U as per Specifications

MCM14 - Network Rack 22U as per Specifications

MCM15 - OFC cable 6 core Dlink As per specifications

MCM16 - OFC LIU 2 Nos As per Specification fully Loaded as per specifications

MCM17 - OFC laying with HDPE PIPE

MCM18 - Wireless indoor Access Point Wave 2 Dual band AC Radio as per technical Specifications

MCM19 - Wireless Outdoor Access Point Wave 2 Dual band AC Radio as per technical Specifications

MCM20 - 4MP IR Fixed-Focal Dome Network indoor camera as per specifications

MCM21 - 4 MP IR Fixed-focal Bullet Network Camera outdoor as per Specifications

MCM22 - Network Video Recorder upto 64 Channel with 45 days Storage

MCM23 - Network Video Recorder upto 16 Channel with 45 days Storage

MCM24 - 24 x 10/100/1000BASE-T ports 4 x 10G SFP+ ports Layer 2 management switch

MCM25 - Poe Switch: Type 1: 24 x 10/100/1000BASE-T PoE ports 4 x 10G SFP+ ports Layer 2 management switch with 370W PoE budget

MCM26 - 10KVA Ups As per Specifications

MCM27 - Electrical Points for Computer Lab, UPS and Network Racks As per requirement

MCM28 - 4x4 Camera Box

MCM29 - PVC conduit/PVC Channel/Casing and Capping as per requirement

MCM30 - Installation and Configuration of Network Firewall

MCM31 - Cat6 Cable Laying

MCM32 - Patch Panel Termination

MCM33 - Cat6 I/o Termination

MCM34 - Cat6 Face Plate installation

MCM35 - Patch Cords Installation Dressing and Numbering

MCM36 - Network Rak Installation 9U

MCM37 - Network Rak Installation 22U

MCM38 - OFC cable Laying

MCM39 - LIU installation and Dressing

MCM40 - HDPE Pipe Laying

MCM41 - Earth Excavation

MCM42 - Installation and Configuration of Indoor Access Point

MCM43 - Installation and Configuration of Outdoor Access Point

MCM44 - Installation of Dome and Bullet camera with PVC back box

MCM45 - Installation and configuration of NVR as per requirement

MCM46 - Installation and Configuration of Access Switch

MCM47 - Installation and Configuration of POE Access Switch

MCM48 - Installation and configuration of 10KVA UPS system

MCM49 - 3 seater Bench & Desk for Class Room: Supply, delivery and assembling bench & desk unit of size 1800mm as shown in the drawing with the following specifications: The overall dimensions should be of size 1800mmx895mmx750mm. The Plywood panel for Desk (1800x378x18mm), seat (1800x335x25mm) and back (1800x265x18mm) should be made of both side 0.8mm thick pre-laminated sheet confirming to IS 10701: 2012, the edges should be rounded duly sealed with 2mm thick 18mm & 25mm wide hot pressed PVC (Poly Vinyl Chloride) beading and fixed to the understructure supporting the ply wood sheet with power driven 16mm screws to the square tubes. The understructure should be made of 25.0mm square tube 1.6mm thick powder coated ERW (Electrical Resistant Welded) frames at base which should be welded to the desk and seat supports that are made of 1.0mm thick powder coated 27.5mm x 25.4mm C channel frame sections. (3) Vertical frames at base and back of seat made of 25.0mm sq. tube x 1.6mm thick powder coated ERW tubes should be provided with 25mm Sq. tubes stiffeners between them fixed with threaded screws. These frames, legs & open ends should be closed with PVC caps. The storage shelf closed on three sides should be made from 0.8mm thick powder coated MS sheet affixed with self thread screws below the desktop and the frame supporting to the desk top. Hooks made from 6.0mm dia MS rods should be provided on eigher side of the vertical frame of the desk, for hanging bags/bottles. All wooden panels shall be half rounded at corners. Steel used should confirm to IS-513. The legs shall be provided with PVC bushes steel used should undergo pre treatment process as per IS 3618 - 1996. All structural steel fabricated components requiring welding are spot welded and finished with Epoxy polyester powder coating DFT (Dry Film Thickness) of 45 microns as per IS101. Complete for finished item of work, the item shall carry a warranty period of 2 years (24 months) from the date of supply. The rate including cost of all materials, labour and all types of incidental charges, transportation, lead and lift etc., complete.

MCM50 - 2 seater Bench & Desk for Class Room: Supply, delivery and assembling bench & desk unit of size 1200mm as shown in the drawing with the following specifications: The overall dimensions should be of size 1200mmx895mmx750mm. The Plywood panel for Desk (1200x378x18mm), seat (1200x335x25mm) and back (1200x265x18mm) should be made of both side 0.8mm thick pre-laminated sheet confirming to IS 10701: 2012, the edges should be rounded duly sealed with 2mm thick 18mm & 25mm wide hot pressed PVC (Poly Vinyl Chloride) beading and fixed to the understructure supporting the ply wood sheet with power driven 16mm screws to the square tubes. The understructure should be made of 25.0mm square tube 1.6mm thick powder coated ERW (Electrical Resistant Welded) frames at base which should be welded to the desk and seat supports that are made of 1.0mm thick powder coated 27.5mm x 25.4mm C channel frame sections. (3) Vertical frames at base and back of seat made of 25.0mm sq. tube x 1.6mm thick powder coated ERW tubes should be provided with 25mm Sq. tubes stiffeners between them fixed with threaded screws. These frames, legs & open ends should be closed with PVC caps. The storage shelf closed on three sides should be made from 0.8mm thick powder coated MS sheet affixed with self thread screws below the desktop and the frame supporting to the desk top. Hooks made from 6.0mm dia MS rods should be provided on eigher side of the vertical frame of the desk, for hanging bags/bottles. All wooden panels shall be half rounded at corners. Steel used should confirm to IS-513. The legs shall be provided with PVC bushes steel used should undergo pre treatment process as per IS 3618 - 1996. All structural steel fabricated components requiring welding are spot welded and finished with Epoxy polyester powder coating DFT (Dry Film Thickness) of 45 microns as per IS101. Complete for finished item of work, the item shall carry a warranty period of 2 years (24 months) from the date of supply. The rate including cost of all materials, labour and all types of incidental charges, transportation, lead and lift etc., complete

MCM51 - Providing and fixing Free Standing Table for Cabin- without frames consisting of 25 mm thick PLPB table top ,25 mm thick PLPB with edge bonded End table,18 mm thick PLPB with edge bonded Modesty, Wire manager -ABS plastic grommet one number per table Hardware-Minifix assembly and screw leg., as per specifications, drawings and as directed by Engineer in charge 1500 mmW x 600mm D x 750 mm ht (Edgebinding table top)

MCM52 - Providing and supplying arm rest peacock chairs frame (35x25mm) made out of plantation timer of natural beach veneer and finished with sanding sealer and melamine polish, with approved colour (upholstery) for seating and backrest. The chair shall be DL-111C model of decorative laminates or equivalent standard. The chair frame shall finish with beach/oak/ mahogany rose wood/teak/walnut/plain stained wood any approved color.

MCM53 - Supply and installation of computer workstations size of 3000mm x 600mm X 740 ht with frames consisting of 25 mm thick PLPB table top 25 mm thick PLPB with edge bonded Size: 50mm x 50mm MS Sq. tube of 18 guage and powder coated and data provison and complete labour for entire work. It also lincluding transportation erection charges and all hire charges of machineries, loading unloading and lifting etc., complete including all other incidental charges required for completion of work.

MCM54 - High back executive revolving chair Providing , supply of high back revolving chair using single moulded medium back with good quality fabric mesh back, height and depth adjustable gas lift with sincro tilt mechanism and single locking facility with adjustable PU arms, legs, should be five prong metal with twin wheel, chrome base finish.

MCM55 - Mid back revolving chair Providing, supply of Medium back revolving chair using single moulded medium back with good quality fabric mesh back, height and depth adjustable gas lift with sincro tilt mechanism and single locking facility with adjustable PU arms, legs, should be five prong metal with twin wheel, chrome base finish.

MCM56 - Supply of nilkamal plastic chairs with Stainless steel legs. It also including transportation erection charges and all hire charges of machineries, loading unloading and lifting etc., complete including all other incidental charges required for completion of work as per specifications. branded make or equivalent etc

MCM57 - Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofing treatment to the Existing Roof surface/Chajjas/Sunken portion of WC:Bathroom applied @ 1.2 l/per m2, having tensile strength greater than 1.5N/mm2, elongation greater than 300% with solid content not less than 60% in 2 coats including surface preparation, priming the surface with water based acrylic primer @0.1 l/m2, and spreading 60 gsm geotextile between two top coats completely as per specification. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification.(SR 2023-24 Vol-II, P-149/15.2)

MCM58 - Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clA, Power LEDs with CCT 6500 degree K, CRI 70%. efficacy 100 lumen per W, 120degree beam spread, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF 0.95, power loss should 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition - LED modular down light 2'x2' 40-42 W

MCM59 - Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection molded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency 1301m/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 150Watts