Mysore Sales International Limited Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 1,05,000Document Cost
Refer DocumentsTender Fee
₹ 1,290
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
MSIL/2023-24/OW/WORK_INDENT2Bid Award Id
ViewTender No
MSIL/2023-24/OW/WORK_INDENT2Tender Authority
Mysore Sales International Limited ViewPurchaser Address
-Website
http://eproc.karnataka.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
HOWORK04 - Anti-corrosive treatment Applying of two coats of anti-corrosive primer on the exposed cleaned surface of the rebar as per the manufacturer's specification and directions of the Engineer-in-charge COST inclusive of all materials, equipment hire charges, consumables, labour, staging, lead and lift, tools and tackles etc., complete.(Assuming 1.0 Rmt exposure of rebar/sq.m) Ground floor-Columns(B/8 and G/8)
6
300
1800
... More
HOWORK05 - Corrosion Inhibitor treatment Applying corrosion inhibitor(“PROTECTOSIL CIT” , BASF Make or Equivalent) coating on the exposed cleaned surface of the concrete as per the manufacturer's specification and directions of the Engineer-in-charge COST inclusive of all materials, equipment hire charges, consumables, labour, staging, lead and lift, tools and tackles etc., complete.
6
400
2400
... More
HOWORK06 - Drilling and fixing shear connectors in concrete Drilling 12 mm dia and 75 mm deep holes at 400mm C/C in concrete in staggered pattern for fixing shear connectors, using rotary-cum-hammering action electrical drilling machine with concrete drill bits of suitable size in all sides of the RC columns and cleaning with compressed air after drilling the holes and fixing with anchor grout(Talrak Polygrip” or Equivalent) as per sketch and directions of the Engineer-in-charge. The cost inclusive of labours, tools and tackles, staging, machinery hire charges, machinery consumables, materials, water etc., complete Ground floor-Columns(B/8 and G/8)
40
300
12000
... More
HOWORK07 - Drilling holes in concrete for fixing reinforcement Drilling 20mm dia, 150mm deep holes in concrete for fixing 16 mm dia TMT reinforcement, using rotary-cum-hammering action electrical drilling machine with concrete drill bits of suitable size in RC slabs/beams and cleaning with compressed air after drilling and fixing with anchor grout(Talrak Polygrip” or Equivalent )as per sketch and directions of the Engineer-in-charge. The cost inclusive of labours, tools and tackles, staging, machinery hire charges, machinery consumables, materials, water etc., complete Ground floor-Column (B/8 and G/8)
28
600
16800
... More
HOWORK08 - Steel fabrication Providing &Fabricating HYSD STEEL Fe-500 (cold, twisted) reinforcement for RCC work including straightening, cutting, bending, hooking, placing in position lapping and / or welding wherever required tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks, and wastage shall not be measured and paid) and directions of the Engineer-in-charge . COST inclusive of all materials, consumables,shuttering, labours, equipment, drilling holes for fixing the reinforcements in slabs and beams, scaffolding/staging, hire charges,tools and tackles etc., complete.Main bars for the columns (16mm dia)
0.06
100000
6000
... More
HOWORK09 - Steel fabrication Providing &Fabricating HYSD STEEL Fe-500 (cold, twisted) reinforcement for RCC work including straightening, cutting, bending, hooking, placing in position lapping and / or welding wherever required tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks, and wastage shall not be measured and paid) and directions of the Engineer-in-charge . COST inclusive of all materials, consumables,shuttering, labours, equipment, drilling holes for fixing the reinforcements in slabs and beams, scaffolding/staging, hire charges,tools and tackles etc., complete. Ties 8mm dia
0.01
100000
1000
... More
HOWORK10 - Free flow micro concreting Providing free flow micro concrete(“Talrak Microcrete GP or Equivalent) with max 50% of Microconcrete Weight( Ie Micro concrete : Jelly- 2:1) , 12 mm down washed granite aggregates for columns with slurry tight shuttering as per the specification, including mixing, pouring, curing as per sketch and directions of the Engineer-in-charge Water to be mixed as per Tecnical data sheet.COST inclusive of all materials, consumables, scaffolding, labours, equipment hire charges, tools and tackles etc., complete.
0.45
80000
36000
... More
HOWORK11 - Surface preparation The existing plaster on the internal surface of reatining wall shall be removed completely by gentle chipping and exposed surface to be cleaned with air and water jet as per the directions of engineer-in-charge. COST inclusive of all materials, consumables,labours, equipment hire charges, tools and tackles ,including carting away the rubble away from site, complete.
96
300
28800
... More
HOWORK12 - Pressure grouting for the dampness/leakage region in retaining wall Existing dampness/leakage region in the retaining wall joints, shall be pressure grouted with Cement slurry grouting added with expansive agent through preinstalled packers with a pressure of 3 to 5 kg/sq.cm as per specifications. The nozzles shall be cut to flush with surface and plugged after grouting. COST inclusive of all materials, consumables, labours, equipment hire charges, tools and tackles etc., complete. (Assuming 5kg cement)
200
500
100000
... More
HOWORK13 - Providing crystalline waterproof coating Providing two coats of crystalline waterproofing coat (PENETRON make) or any equivalent as per the directions of engineer's incharge & manufacturer's specification. COST inclusive of all materials, staging, consumables, labours, equipment, tools and tackles etc., complete.
96
700
67200
... More
HOWORK14 - Drilling and fixing of shear connectors in retaining wall Drilling 12 mm dia, 100 mm deep holes at 400mm c/c in wall for fixing of shear connectors, using rotary-cum-hammering action electrical drilling machine with concrete drill bits of suitable size and cleaning with compressed air as per and fixing 8 mm dia shear connectors using polyester resin grout as per sketch and directions of the Engineer-in-charge. COST inclusive of labours, tools and tackles, staging, machinery hire charges, machinery consumables, materials, water etc., complete
640
300
192000
... More
HOWORK15 - Drilling holes in concrete for fixing reinforcement Drilling 12mm dia, 100mm deep holes in concrete for fixing reinforcement, using rotary-cum-hammering action electrical drilling machine with concrete drill bits of suitable size in RC slabs and cleaning with compressed air and fixing with anchor grout as per sketch and directions of the Engineer-in- charge. The cost inclusive of labours, tools and tackles, staging, machinery hire charges, machinery consumables, materials, water etc., complete
260
250
65000
... More
HOWORK16 - Steel fabrication Providing & Fabricating HYSD STEEL Fe-500 (cold, twisted) reinforcement for RCC work including straightening, cutting, bending, hooking, placing in position lapping or welding, wherever required tying with binding wire and anchoring to the adjoining members, wherever necessary complete as per design (laps, hooks, and wastage shall not be measured and paid) and directions of the Engineer-in-charge. COST inclusive of all materials, consumables, shuttering, labours, equipment, drilling holes for fixing the reinforcements in floor and wall, , hire charges,tools and tackles etc., complete.(8 mm dia at 250mm c/c) both ways
0.345
100000
34500
... More
HOWORK17 - Free flow micro concrete (100 mm thick) Providing cementititous free flow micro concrete with slurry tight shuttering as per the technical specification, sketch and directions of the Engineer-in-charge. COST inclusive of all materials, consumables, slurry tight shuttering, labours, equipment hire charges, tools and tackles etc., complete.
9.6
80000
768000
... More
HOWORK18 - Surface preparation Removal of existing plaster / debonded cover concrete of existing rc raft beams and slabs by gentle chipping until the hard concrete is exposed (without disturbing the original concrete) and the exposed rebars shall be thoroughly cleaned using sand grinders to remove the corrosion scales, rust etc.till the bright metal surface is exposed. the exposed concrete surface and cleaned rebars shall be thoroughly wash with using air and water jet as per sketch, specifications & directions of the Engineer-in-charge. COST inclusive of all materials, consumables, scaffolding, labours, equipment hire charges, tools and tackles etc., complete. Basement - RC ceiling Slab
27.59
400
11036
... More
HOWORK19 - Underneath of overhead tank
34.4
400
13760
... More
HOWORK20 - Anti-corrosive treatment Applying of two coats of anti-corrosive primer on the exposed cleaned surface of the rebar as per the manufacturer's specification and directions of the Engineer-in-charge COST inclusive of all materials, equipment hire charges, consumables, labour, staging, lead and lift, tools and tackles etc., complete.(Assuming 1.0 Rmt exposure of rebar/sq.m) Basement - RC ceiling Slab
28
300
8400
... More
HOWORK21 - Underneath of overhead tank
34
300
10200
... More
HOWORK22 - Corrosion Inhibitor treatment Applying corrosion inhibitor coating on the exposed cleaned surface of the concrete as per the manufacturer's specification and directions of the Engineer-in-charge COST inclusive of all materials, equipment hire charges, consumables, labour, staging, lead and lift, tools and tackles etc., complete. Basement - RC ceiling Slab
27.59
400
11036
... More
HOWORK23 - Underneath of overhead tank
34.4
400
13760
... More
HOWORK24 - Drilling and fixing shear connectors in concrete Drilling 12 mm dia and 75 mm deep holes at 400mm C/C in concrete in staggered pattern for fixing shear connectors, using rotary-cum-hammering action electrical drilling machine with concrete drill bits of suitable size in all sides of the RC columns and cleaning with compressed air and fixing with anchor grout as per sketch and directions of the Engineer-in-charge. The cost inclusive of labours, tools and tackles, staging, machinery hire charges, machinery consumables, materials, water etc., complete Basement - RC ceiling Slab
184
300
55200
... More
HOWORK25 - Underneath of overhead tank
220
300
66000
... More
HOWORK26 - Weld mesh (50x50x3 mm) Providing & fixing weld mesh (50x50x3 mm) , placed in position & tack welded to the shear connectors. as per sketch and directions of the Engineer- in-charge COST inclusive of all materials, consumables, scaffolding, labours, equipment hire charges, tools and tackles etc., complete. Basement - RC ceiling Slab
27.59
600
16554
... More
HOWORK27 - Underneath of overhead tank
34.4
600
20640
... More
HOWORK28 - 25 mm thick Polymer modified mortor Providing and plastering with 25 mm thk.Polymer modified mortor, as per the technical specification, sketch and directions of the Engineer-in-charge COST inclusive of all materials, consumables, scaffolding, labours, equipment hire charges, tools and tackles etc., complete. Basement - RC ceiling Slab
27.59
2000
55180
... More
HOWORK29 - Underneath of overhead tank
34.4
2000
68800
... More
HOWORK30 - Surface preparation The surface of slab and raft beams shall be cleaned / grinded with grinding machine to remove all loose particles and cleaned with air/water jet as per the directions of engineer-in-charge. COST inclusive of all materials, consumables,labours, equipment hire charges, tools and tackles etc., complete. Floor and RC celing slab
510
300
153000
... More
HOWORK31 - Raft beams
315
300
94500
... More
HOWORK32 - Polyurethane based protective coat Providing polyurethane based protective coating as per manufacturer’s specification and directions of the Engineer-in-charge. COST inclusive of all materials, consumables, scaffolding, labours, equipment hire charges, tools and tackles etc., complete.Floor and RC celing slab
510
750
382500
... More
HOWORK33 - Raft beams
315
750
236250
... More
HOWORK34 - Surface preparation Removal of existing debonded cover concrete of existing rc member by gentle chipping until the hard concrete is exposed (without disturbing the original concrete) and the exposed rebars shall be thoroughly cleaned using wire brush and emery paper to remove the corrosion scales, rust etc.till the bright metal surface is exposed. The exposed concrete surface and cleaned rebars shall be thoroughly washed using air and water jet as per sketch, specifications & directions of the Engineer-in-charge. COST inclusive of all materials, consumables, scaffolding, labours, Temporary Supporting System at regular intervals (1.5 to 2.0 m c/c), equipment hire charges, tools and tackles etc., complete.
150
450
67500
... More
HOWORK35 - Anti-corrosive treatment Applying of two coats of anti-corrosive primer on the exposed cleaned surface of the rebar as per the manufacturer's specification and directions of the Engineer-in-charge COST inclusive of all materials, equipment hire charges, consumables, labour, staging, lead and lift, tools and tackles etc., complete. (Assuming 1.0 Rmt exposure of rebar/sq.m)
150
300
45000
... More
HOWORK36 - Corrosion inhibitor treatment Applying corrosion inhibitor coating on the exposed cleaned surface of the concrete as per the manufacturer's specification and directions of the Engineer-in-charge COST inclusive of all materials, equipment hire charges, consumables, labour, staging, lead and lift, tools and tackles etc., complete.
150
400
60000
... More
HOWORK37 - Drilling and fixing shear connectors in concrete Drilling 12 mm dia and 75 mm deep holes at 400mm C/C in concrete in staggered pattern for fixing shear connectors, using rotary-cum-hammering action electrical drilling machine with concrete drill bits of suitable size in all sides of the RC columns and cleaning with compressed air and fixing with anchor grout as per sketch and directions of the Engineer-in-charge. The cost inclusive of labours, tools and tackles, staging, machinery hire charges, machinery consumables, materials, water etc., complete
1000
300
300000
... More
HOWORK38 - Weld mesh (50x50x3 mm) Providing & fixing weld mesh (50x50x3 mm) , placed in position & tack welded to the shear connectors. as per sketch and directions of the Engineer- in-charge COST inclusive of all materials, consumables, scaffolding, labours, equipment hire charges, tools and tackles etc., complete.
150
500
75000
... More
HOWORK39 - 25 mm thick Polymer modified mortor Provding and finishing of cleaned spalled concrete surface with polymer modified mortar as per manufacturer’s specification and directions of the Engineer-in-charge COST inclusive of all materials, consumables, scaffolding, labours, equipment hire charges, tools and tackles etc., complete.
150
2000
300000
... More
HOWORK40 - Removing of existing RC chajja and surface preparation of chipped area. Completely removal of existing severly distressed Rc chajja by gentle chipping and chipped surface shall be grinded with grinding machine to remove all loose particles and cleaned with air/water jet as per sketch, specifications & directions of the Engineer-in-charge. COST inclusive of all materials, consumables, scaffolding, labours, Temporary Supporting System at regular intervals (1.5 to 2.0 m c/c), equipment hire charges, tools and tackles etc., complete.
1.95
1000
1950
... More
HOWORK41 - Drilling holes in concrete for fixing reinforcement Drilling 14 mm dia, 150mm deep holes in concrete for fixing reinforcement, using rotary-cum-hammering action electrical drilling machine with concrete drill bits of suitable size in RC lintel and cleaning with compressed air and fixing with anchor grout as per sketch and directions of the Engineer-in-charge. The cost inclusive of labours, tools and tackles, staging, machinery hire charges, machinery consumables, materials, water etc., complete
25
250
6250
... More
HOWORK42 - Steel fabrication Providing & Fabricating HYSD STEEL Fe-500 (cold, twisted) reinforcement for RCC work including straightening, cutting, bending, hooking, placing in position lapping or welding, wherever required tying with binding wire and anchoring to the adjoining members, wherever necessary complete as per design (laps, hooks, and wastage shall not be measured and paid) and directions of the Engineer-in-charge. COST inclusive of all materials, consumables, shuttering, labours, equipment, drilling holes for fixing the reinforcements in floor and wall, , hire charges,tools and tackles etc., complete.(10 mm dia at 150mm c/c main bar)
(8 mm dia at 150mm c/c distribution bar)
0.015
100000
1500
... More
HOWORK43 - M25 Grade Concrete for proposed chajja Providing M25 concrete for RC chajja with slurry tight shuttering as per specification when the bonding epoxy is tacky and cured for a minimum period of 14 days as per standard practice, sketch and directions of the Engineer-in-charge. COST inclusive of all materials, formwork,consumables, scaffolding,
labours, equipment hire charges, tools and tackles etc., complete..
0.13
20000
2600
... More
HOWORK44 - Layer of water proof plastering with smooth coving After curing a layer of water proof plastering with smooth coving shall be provided as per standards, sketch and directions of the Engineer-in-charge. COST inclusive of all materials, formwork,consumables, scaffolding, labours, equipment hire charges, tools and tackles etc., complete..
2
1500
3000
... More
HOWORK45 - Surface preparation The existing floor finishes, in fill cinders, sanitary, plumbing lines etc., shall be completely removed and the existing mother slab shall be exposed.All the debris shall be removed and the surface of the existing floor area shall be cleaned by using air\water jet.The undulations surface shall be finished with polymer modified mortar as per the technical specification. COST inclusive of all materials, consumables, labours, equipment hire charges, tools and tackles, transporting waste materials to GF and then to out side the premises including all lead, lift and cartage.
24
1000
24000
... More
HOWORK46 - Providing waterproof membrane Providing & laying a layer of non adhesive non bituminous WPE-55 waterproofing membrane such as Talrak flexeal PEP or any equivalent.as per the directions of engineer's incharge & manufacturer's specification. COST inclusive of all materials, tile adhesive, consumables, labours, equipment, ,tools and tackles etc., complete.
24
900
21600
... More
HOWORK47 - M25 grade concrete Providing & placing M25 Grade concrete with integral water proofing compound for floor & haunching, minimum 40 mm thick as per the technical specification, sketch and directions of the Engineer-in-charge. COST inclusive of all materials, consumables, labours, equipment hire charges, tools and tackles with all lead and lift.
0.96
10000
9600
... More
HOWORK48 - Cinders filling New plumbing and sanitary lines shall be laid with leak proof joints as per requirements. Cinders shall be filled , compacted without damaging the sanitary, plumbing lines, as per standrd practice COST inclusive of all materials, consumables, labours, equipment hire charges, tools and tackles , with all lead and Lift complete.
0.96
7000
6720
... More
HOWORK49 - M25 grade new screed concrete (40 mm Thk.) M25 grade new screed concrete (40 mm Thk.) with integral water proofing compound shall be provided over the cinders ensuring adequate slope for effective disposal of water. COST inclusive of all materials, consumables, labours, equipment hire charges, tools and tackles etc., complete.
0.96
10000
9600
... More
HOWORK50 - Laying new floor tiles New floor tiles shall be laid using tile adhesive chemical and the tile joint shall be filled with epoxy-based tile grout as per the manufacturer’s specifications. COST inclusive of all materials, consumables, labours, equipment hire charges, tools and tackles etc., complete.
24
1500
36000
... More
HOWORK51 - Non-shrink bore pack grout
The borehole of service lines in RC members and wall shall be properly filled using non-shrink bore pack grout as per the technical specifications.
10
2000
20000
... More
HOWORK52 - Groove cutting of floor tile joint and at the interface of wall and floor followed by cleaning the same with air blower. Filling the tile joints with epoxy based tile grout from M/S MYK LATICRETE or any equailant as per manufacture's specificatios and directons of engneer incharge. COST inclusive of all materials, tile grout, consumables, labours, equipment, ,tools and tackles etc., complete.
100
2000
200000
... More
HOWORK53 - Surface preparation ( Interior & Exterior Walls) The deteriorated/de-bonded plaster on masonry walls shall be totally removed by gentle chipping. COST inclusive of all materials, consumables, scaffolding, labours, equipment hire charges, tools and tackles etc., complete.
350
300
105000
... More
HOWORK54 - Water proofing plastering The mortar joints in walls shall be deep racked and repointed with CM 1:3 as per standard practice followed by re-plastering in CM 1:4 mixed with water proofing compound and the plastered surface shall be cured for a minimum period of 7 days as per the technical specifications. COST inclusive of all materials, equipment hire charges, consumables, labour, tools and tackles etc., complete.
350
800
280000
... More
HOWORK55 - Painting Providing water repellant paint on cleaned surface after treating the cracks with acrylic based crack sealant as per the technical specifications and direction of engineer in-charge.COST inclusive of all materials, equipment hire charges, consumables, labour, tools and tackles etc., complete.
350
500
175000
... More
HOWORK56 - Surface preparation Removal of existing debonded cover concrete of existing rc member by gentle chipping until the hard concrete is exposed (without disturbing the original concrete) and the exposed rebars shall be thoroughly cleaned using wire brush and emery paper to remove the corrosion scales, rust etc.till the bright metal surface is exposed. The exposed concrete surface and cleaned rebars shall be thoroughly washed using air and water jet as per sketch, specifications & directions of the Engineer-in-charge. COST inclusive of all materials, consumables, scaffolding, labours, Temporary Supporting System at regular intervals (1.5 to 2.0 m c/c), equipment hire charges, tools and tackles etc., complete.
70
400
28000
... More
HOWORK57 - Anti-corrosive treatment Applying of two coats of anti-corrosive primer on the exposed cleaned surface of the rebar as per the manufacturer's specification and directions of the Engineer-in-charge COST inclusive of all materials, equipment hire charges, consumables, labour, staging, lead and lift, tools and tackles etc., complete. (Assuming 1.0 Rmt exposure of rebar/sq.m)
70
300
21000
... More
HOWORK58 - Corrosion Inhibitor treatment Applying corrosion inhibitor coating on the exposed cleaned surface of the concrete as per the manufacturer's specification and directions of the Engineer-in-charge COST inclusive of all materials, equipment hire charges, consumables, labour, staging, lead and lift, tools and tackles etc., complete.
70
400
28000
... More
HOWORK59 - Polymer Modifier mortar(Avg 20mm thick) Provding and finishing of cleaned spalled concrete surface with polymer modified mortar as per manufacturer’s specification and directions of the Engineer-in-charge COST inclusive of all materials, consumables, scaffolding, labours, equipment hire charges, tools and tackles etc., complete.
70
2000
140000
... More
HOWORK60 - Surface preparation Making Groove 12mm wide-6mm deep along the crack as per the directions of engineer's incharge & manufacturer's specification. COST inclusive of all materials, consumables, labours, equipment hire charges, tools and tackles etc., complete.
7
200
1400
... More
HOWORK61 - Elastomeric crack sealant Groove shall be filled with acrylic based elastomeric crack sealant (acrylic based) or any equivalent as per the directions of engineer's incharge & manufacturer's specification. COST inclusive of all materials, consumables, labours, equipment hire charges, tools and tackles etc., complete.
7
500
3500
... More
HOWORK62 - Removing of leaky sanitary, plumbing and rainwater outlet pipes Leaky pipes shall be removed and redone with leak prrof joint as per the directions of engineer's incharge COST inclusive of all materials, consumables, labours, equipment hire charges, tools and tackles etc., complete.
1
500000
500000
... More
HOWORK63 - Surface preparation The drain box, beam and wall surface shall be cleaned with grinded with grinding machine to remove all loose particles and cleaned with air/water jet as per the directions of engineer's incharge COST inclusive of all materials, consumables, labours, equipment hire charges, tools and tackles etc., complete.
62.9
200
12580
... More
HOWORK64 - Water proof treatment with Reinforced concrete lining After surface preparation the entire drain box shall be provided with water proof treatment with Reinforced concrete lining as per the directions of engineer's incharge COST inclusive of all materials, consumables, labours, equipment hire charges, tools and tackles etc., complete.
28.9
2000
57800
... More
HOWORK65 - Water proofing plaster (up to 2m height) The adjacent wall and beam shall be provided with water proofing plaster (up to 2m height) as per specification, directions of engineer's incharge COST inclusive of all materials, consumables, labours, equipment hire charges, tools and tackles etc., complete.
34
700
23800
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements