Minor Irrigation Department Tender

code04 - Supplying and spare materials suitable providing of L&T make OCB base plate with studs etc,. Complete providing & fixing contacts for OCB and providing of moving copper contacts or providing of novelts copper coils with cour (3 No's) and providing of bakelite buses for study in OCB, providing and fixing of 100 sq.mm copper lugs (cripping) or wonder make RYB steel grip pvc tape and steel tension blade. On volt coil with OCB required oil and labour charges for dismantling and reassembly the OCB unit with new parts, repairing for connecting with load condition and filling complete job.

code05 - Transformer Oil

code06 - SAE 10 OIL

code07 - Grease GEM-RR3

code08 - Sub-Estimate No: 3 : H R Employees Salary.:- Enganging pump operator for pump operation at Jackwell, for 8 months, Enganging one operator for day and one operator for night.

code09 - Engaged patkari/ neeragnti/ sowdies for water management during day and night at volnarable pionts to push water to atchkat, recording the demand statement and to aviod damages of the canal etc,. for 8 months

code10 - Sub-Estimate No: 4 : Civil Works:-Cutting and burning or disposing off Apu / Jondu from marshy areas as directed with all other ancillary operations complete.

code11 - Cutting and removing jauliflora bushes upto 1.50 m girth excluding removal of stumps and including burning or disposing off the materials as directed with all other ancillary operations complete.

code12 - Excavation and removal of silt and silt mixed with sand from canal bed in dry condition including disposing off the same in spoil bank or on the canal embankment in layers as directed etc., complete with all lead and all lifts.

code13 - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m.

code14 - Providing and laying in position Reinforced cement concrete for all Foundation works of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates..

code15 - RAGALAPRAVI Sub Estimate -1 Maintainance Of Pumping Machinery :- Supplying of spare parts to 200 HP oil lubricated DWT pump to facilitate from the site to workshop by removing motor turbine base, tee joint, column pipes, line shaft and bowl assembly etc., Complete, supplying of spare parts to bowl assembly by providing and fixing of gun metal casted, machining, turning, boring and finishing for required sizes and fixing of suction and discharge case bearing, interstage case bearing, supplying of spare parts to trueness and truing of bowl assembly stainless shaft with S.S welding, turning, maching for orginal dimensions of the shaft, supplying of spare parts to trueness and trueing the impeller including inner finishing for shaft sizes and externally machining to requied sizes, supplying of spare parts to the TT nut with replacing new GM bush, supplying of spare parts to stuffing box by means of boring, turing, and internally left hand thearding for oil tube sizes, supplying of spare to gland rope for TT nut, supplying of spare parts to adopter screw gun metal bearing including cost of new gun metal bush and machining for bowl assembly shaft sizes, supplying of spare parts to line shaft of all sizes including welding and turning for required sizes, supplying of spare parts to oil tubes by cutting both ends of each 5 ft length oil tube including jionting of new MS tubes suitable for oil tubes with internally left hand turning for bearing sizes, supplying of spare parts to oil lubricated gun metal bearings suitable pattern casted internally machining and finishing fot line shaft sizes and externally turning machining and left hand treading as per the sample original bearing supplying of spare parts to bolts and nuts packing rubber gland rope etc,. jointing materials after attending all repairs same as to facilited from work shope to site and re errection of pump after attending job works including assembling all the parts with errection and trail running ect,. complete. DWT 60HP PUMP

code16 - Sub-Estimate No: 2 :Maintainance Of Electrical Machinery & Consumables:- Winding of 200 HP DWT 3 phase induction motor Kirloskar/ Jothi/ Croption greaves make motor with 'B' class insulating materials such as triple papers, emperor cloth, cotton rape, varnish (oil) air dry, fiber glass sleeves, legs stripping with 7/16 end connection and suitable for above motor HTP (ISI) make class-1 working with 100 degree C heat gauge enamel coated and insulating copper winding wire required as per original make. Labour charges to lifiting and the above motor including transporation charges from site to workshop and return to site and overolling and trail run at site etc,. Complete in the direction of incharge Engineer.DWT 60HP KIRLOSKAR PUMP

code17 - Supplying starter spares for 200 Amps air brake ATS starter replacement of suitable contacts on volt coil, timer, pushing timer, pilot lamp, amps meter and volt meter, turnel plate, push botton, MCB, Bassbar plate, a/m plates, 716 flexible copper pvc coated wire 3 If contacter for suitable HP, tripping relay unit, CT relaying, CT coil, HRC fuse function etc,. And complete with all lead and lifts including loading and unloading as per the directions of Engineer-in-charge of work.

code18 - Supplying and spare materials suitable providing of L&T make OCB base plate with studs etc,. Complete providing & fixing contacts for OCB and providing of moving copper contacts or providing of novelts copper coils with cour (3 No's) and providing of bakelite buses for study in OCB, providing and fixing of 100 sq.mm copper lugs (cripping) or wonder make RYB steel grip pvc tape and steel tension blade. On volt coil with OCB required oil and labour charges for dismantling and reassembly the OCB unit with new parts, repairing for connecting with load condition and filling complete job.

code19 - Supplying of spare parts nad repair re conditioning, trail running of 10" sizes N.R. valve including dismentaling and fecilete from site work to work shop by removing from delivery end of T joint including supply of spare parts gun metal bushs hingers shop, stainless steel square thredding shaft square thredding shaft gum metal nut guld ring to tongue suitable sizes, paking rubber bolt and nuts with washers of required sizes, and othe jointing material the involves this melting nessesery repals including thredding, streting, turning, machining, finishing etc,. complete with attending all nessesery job works including assembling all the parts with erection and trail running etc,. complete.

code20 - Transformer Oil

code21 - SAE 10 OIL

code22 - Grease GEM-RR3

code23 - Sub-Estimate No: 3 : H R Employees Salary.:- Enganging pump operator for pump operation at Jackwell, for 8 months, Enganging one operator for day and one operator for night.

code24 - Engaged patkari/ neeragnti/ sowdies for water management during day and night at volnarable pionts to push water to atchkat, recording the demand statement and to aviod damages of the canal etc,. for 8 months

code25 - Sub-Estimate No: 4 : Civil Works:-Cutting and burning or disposing off Apu / Jondu from marshy areas as directed with all other ancillary operations complete.

code26 - Cutting and removing jauliflora bushes upto 1.50 m girth excluding removal of stumps and including burning or disposing off the materials as directed with all other ancillary operations complete.

code27 - Excavation and removal of silt and silt mixed with sand from canal bed in dry condition including disposing off the same in spoil bank or on the canal embankment in layers as directed etc., complete with all lead and all lifts.

code28 - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m.

code29 - Providing and laying in position Reinforced cement concrete for all Foundation works of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates..