Minor Irrigation Department Tender

MIN04 - Providing hearting embankment using selected approved impervious soil from borrow areas in layers of 250 to 300 mm (before compaction) including cost of all materials, machinery, labour, all other operations such as collection of soil, spreading soil in layer of specified thickness, sorting out, breaking clods, levelling, sectioning edges/ sides, watering, compacting to density control of not less than 95 percent using power roll3er and all other ancillary operations complete

MIN05 - Re-constructing the cut open bund portion, for forming temperary diversion channel, using soil obtained from bund cutting in layers of 150 to 200 mm thickness before compaction including cost of all labour, materials, machinery, all operations such as sorting out, spreading in layers of specified thickness, breaking clods, sectioning, watering, compacting each layer to density control of not less than 95 percent or as directed using mechanical tampers or by manual labour & all necessary works as directed and complete as per specification.

MIN06 - Removing disturbed rough/ size stone revetment 300 mm thick with 150 mm thick 40 mm down aggregate backing and resetting the same using the available stones and aggregate including packing, wedging, finishing & all necessary works as directed and complete as per specification.

MIN07 - Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) in M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.

MIN08 - Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border/ messages/ symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge & MoRTH specification 804, The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work.