Minor Irrigation Department Tender

Common SR 2023-24 Vol-1,Page No 18 Item No.2.11e - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. e)Dam & Allied Works. Complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge.

Common SR 2023-24 Vol-4B, Page No 130 Item No.1.12 - Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, including cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, centering, formwork and scafolding and all other appurtenances required to complete the work as per technical specifications for check dam /pickups /irrigation tanks/waste weir/sluice, sluice canal and other allied works like abutments/wing walls/returns/cutoff walls works & all necessary works as directed and complete as per specification with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge.

Common SR 2023-24 Vol-1, Page No 15 Item No.2.2.1 - Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, including cost of formwork and all the other appurtenances required to complete the work as per technical specifications-M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge.

Common SR 2023-24 Vol-4B, Page No 139 Item No.3.7 - Providing new embankment abutting to existing bund to strength the existing bund using soil from approved borrow area in layers of 200 to 250 mm and compacting each layer to density control of not less than 95 percent by vibrating plate compactor or pnuematic tamper including cost of all materials, machinery, labour, picking previous layer, spreading soil in layer, breaking clods, watering & all necessary works as directed and complete as per specification. Complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge.

Common SR 2023-24 Vol-4B, Page No 129 Item No.1.1 - Providing and constructing 75 mm dia PVC pipe weep holes for concrete / masonry walls including providing 200 x 200 x 200 mm size porous concrete block made of cement and 20 mm down coarse aggregate in 1 : 4 proportion including 100 mm thick sand backing at the junction of wall and soil back fill, cost of all materials, machinery, labour & all necessary works as directed and complete as per specification with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge.

Common SR 2023-24 Vol-4B,Page No 76 Item No.6.12 - Design, fabrication, supply, erection, testing and commissioning of fixed wheel type vertical lift service gate consisting of skin plate, vertical and horizontal girders, wheels, stiffeners, lifting brackets, guide rollers, ballast blocks, teflon claded rubber seals with all accessories for river sluice /canal sluice vent including cost of all materials,machinery, labour, cutting, aligning, welding, finishing, cleaning, applying one coat of zinc rich epoxy primer and three coats cold applied coal tar epoxy paint, seal fixing and all other ancillary operations complete as per specifications and approved drawings with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge.