Minor Irrigation Department Tender

code01 - Pumping Machinery : Supplying of spare parts to 60 HP oil lubricated DWT pump to facilitate from the site to workshop by removing motor turbine base, tee joint, column pipes, line shaft and bowl assembly etc., Complete, supplying of spare parts to bowl assembly by providing and fixing of gun metal casted, machining, turning, boring and finishing for required sizes and fixing of suction and discharge case bearing, interstage case bearing, supplying of spare parts to trueness and truing of bowl assembly stainless shaft with S.S welding, turning, maching for orginal dimensions of the shaft, supplying of spare parts to trueness and trueing the impeller including inner finishing for shaft sizes and externally machining to requied sizes, supplying of spare parts to the TT nut with replacing new GM bush, supplying of spare parts to stuffing box by means of boring, turing, and internally left hand thearding for oil tube sizes, supplying of spare to gland rope for TT nut, supplying of spare parts to adopter screw gun metal bearing including cost of new gun metal bush and machining for bowl assembly shaft sizes, supplying of spare parts to line shaft of all sizes including welding and turning for required sizes, supplying of spare parts to oil tubes by cutting both ends of each 5 ft length oil tube including jionting of new MS tubes suitable for oil tubes with internally left hand turning for bearing sizes, supplying of spare parts to oil lubricated gun metal bearings suitable pattern casted internally machining and finishing fot line shaft sizes and externally turning machining and left hand treading as per the sample original bearing supplying of spare parts to bolts and nuts packing rubber gland rope etc,. jointing materials after attending all repairs same as to facilited from work shope to site and re errection of pump after attending job works including assembling all the parts with errection and trail running ect,complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code02 - Electrical Machinery and Consumables : Winding of 60 HP DWT 3 phase induction motor Kirloskar/ Jothi/ Croption greaves make motor with 'B' class insulating materials such as triple papers, emperor cloth, cotton rape, varnish (oil) air dry, fiber glass sleeves, legs stripping with 7/16 end connection and suitable for above motor HTP (ISI) make class-1 working with 100 degree C heat gauge enamel coated and insulating copper winding wire required as per original make. Labour charges to lifiting and the above motor including transporation charges from site to workshop and return to site and overolling and trail run at site etc, complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code03 - Supplying starter spares for 125 Amps air brake ATS starter replacement of suitable contacts on volt coil, timer, pushing timer, pilot lamp, amps meter and volt meter, turnel plate, push botton, MCB, Bassbar plate, a/m plates, 716 flexible copper pvc coated wire 3 If contacter for suitable HP, tripping relay unit, CT relaying, CT coil, HRC fuse function etc,. And complete with all lead and lifts including loading and unloading as per the directions of Engineer-in-charge of work.