Minor Irrigation Department Tender

Item Code:04 SR-23-24 Vol 1 P.no I no 1.14.1 - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work - In all kinds of soils Depth upto 3 mComplete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge.

Item Code:05 SR-23-24 Vol 4 P-I P.no 39 I no 2.13 - Providing and laying in-situ vibrated M-15 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for plain concrete works including cost of all materials, machinery, labour, cleaning, providing mortar layer for lift joints, batching, mixing, placing in position, levelling, vibrating, finishing, curing with all other ancillary operations complete.Complete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge.

Item Code:06 SR-23-24 Vol 4 PII P.no130 I no 1.12 - Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, including cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, centering, formwork and scafolding and all other appurtenances required to complete the work as per technical specifications for check dam /pickups /irrigation tanks/waste weir/ sluice, sluice canal and other allied works like abutments/wing walls/returns/cutoff walls works & all necessary works as directed and complete as per specification.Complete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge.

Item Code:07 SR-23-24 Vol 1 P.no16 I no 2.4.2 - Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesComplete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge.

Item Code:08 SR-23-24 Vol -1 P.no7 I no 1.9 - Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Complete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge.

Item Code:09 SR-23-24 Vol 4 P.no18 I no 2.11-h - Steel Fabrication - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification All Other Type of Structure Complete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge.

Item Code:10 SR-23-24 Vol 1 P.no7 I no 1.9 - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.Complete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge.

Item Code:11 SR-23-24 Vol 3 P.no17 I no 3.7 - Compacting original ground supporting embankment - Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction.Complete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge.

Item Code:12 SR-23-24 Vol-4 P-II P.no139 I no 3.7 - Providing new embankment abutting to existing bund to strength the existing bund using soil from approved borrow area in layers of 200 to 250 mm and compacting each layer to density control of not less than 95 percent by vibrating plate compactor or pnuematic tamper including cost of all materials, machinery, labour, picking previous layer, spreading soil in layer, breaking clods, watering etc., complete with all lead and lifts.Complete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge.

Item Code:13 SR-23-24 Vol 4 P-I P.no129 I no 1.5 - Providing and constructing 550 mm thick hand packed rough stone revetment consisting of 300 mm thick rough stones with 400 to 450 mm long through stones at 1.5 m c / c over filter backing of 100 mm thick sand and 150 mm thick 40 mm down graded coarse aggregate layers including cost of all materials, machinery, labour, laying to specified slope, wedging with chips, finishing & all necessary works as directed and complete as per specification.Complete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge.

Item Code:14 SR-23-24 Vol 4 P-II P.no130 I no 1.10 - Providing and laying Hariyala or other approved quality turfing sods for the slopes of earthen embankments over 20 mm thick sand backing including cost of all materials, machinery,labour including preparing surface, spreading sand including tamping, watering for 15 days & all necessary works as directed and complete as per specification.Complete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge.

Item Code:15 SR-23-24 Vol-1 P-I P.no 7 I no 1.8 - Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work.Complete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge.

Item Code:16 SR-23-24 Vol 3 P.no I no 4.14-B(ii)-b - Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fil up the interstices of coarse aggregate, watering and compacting to the required density. Mechanical means - Grading-II (53 mm to 22.4 mm) - Using Screening Type B (11.2mm agg) Complete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge.

Item Code:17 SR-23-24 Vol 4 P-II P.no 139 I no 3.6 - Preparing slope of existing bund ( without pitching ) for abutting fresh embankment to strengthen the existing bund by removing grass and other vegitation including disposing off the material & all necessary works as directed and complete as per specification.Complete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge.

Item Code:18 SR-23-24 Vol 3 P.no 69 I no 8.25.(i) - Providing and erecting a "W" metal beam crash barrier system comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 811 Complete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge.

Item Code:19 SR-23-24 Vol -1 P-I P.no 5 I no 1.4.1 - Earth work excavation by manual means for drains,canals, waste weir,draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils as per drawing and technical specifications, including setting out, shoring, strutting, barricading,caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m Complete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge.

Item Code:20 SR-23-24 Vol 2 -I P.no 63 I no 9.25 - Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. Complete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge.

Item Code:21 SR-23-24 Vol-2 P-I P.no 96 I no 11.60 - Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required Complete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge.

Item Code: 22 SR-23-24 Vol 2 P.no 82 I no:11.16.2 - Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications Complete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge.

Item Code:23 SR-23-24 Vol-1 P no 8. I no:1.15.1 - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth Complete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge

Item Code:24 SR-23-24 Vol 4 P II.Pno130 I no 1.8. - Providing rubble stone/boulder filling between or behind abutment below apron including cost of all materials, labour, hand packing, finishing top surface & all necessary works as directed and complete as per specification. Complete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge

Item Code:25 SR-23-24 Vol-2 P.no 82 I no 11.16.2 - Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machineryComplete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge.

I Code:26 PWD ELE SR-23-24 Vol 6 P.no14.01I no 62 - Supplying heavy gauge PVC conduit pipe …….dia .mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.(2/1.1.2) Complete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge.

Item Code:27 PWD Ele SR 23-24 P No.6 I No 2.5.8 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100Volts as per IS-694:2010 Complete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge.

Item Code:28 PWD EleSR 23-24 P No.56 I No. 13.4.4 - Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts & nuts, as required, suitable for 9 to 12 Mtrs. M. S. tubular pole, with necessary two coats of painting, with all other ccessories.Double bracket 2x2 m . Length Complete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge.

Item Code:29 PWD Ele SR 23-24 P No.45. I No 11.7.2 - Supply of LED pole mounting type post top lantern with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/ clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Comatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 0322/ EC 60598, LM 79 LM 80 Adherence with RoHS. UL approved MCPCB . LED Efficiency 130lm/w, nominal CRI 75. Luminaire manufacturer should have inhouse facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defectworking under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source.LED Post Top Lantern with 25 watts Complete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge.

Item Code:30 PWD Ele SR 23-24 P No.5 I No 2.3.2 - Wiring for lighting/Power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper With Low conductor resistance single core wire in open or conceanled system of wiring with specified IS-694:1990 & confirming to latest amendments a. 1.5 mm2 Complete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge.

I Code:31.Vol 6 ESCOMs SR 23-24 I No.42.07 P No18 - Aerial Bunched Cable (ABC)1.1 kV, LT Aerial Bunched Cable, XLPE insulation confirming to IS-14255: 1995 3x25 + 1x25 + 1x16 Sqmm Street light (Insulated Messenger cum Neutral)Complete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge

Item Code:32 Vol 6, PWD EleSR 23-24 INo. 29.03 P N - Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards and Lighting, Using sight Rails and Sign Boards at every 100 Mtr wherever necessary as directed.In Hard Soil Complete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge.

Item Code:33 Vol 6, PWD Ele SR 23-24 INo 5.18.1 P - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' cure, indicator ON/OFF, energy cross-3 with Short circuit breaking cappacity of 10K and complete wiring as required. Confirming to IEC 60898. 6-32 Amps SP Complete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge.

Item Code:34 Vol 6 PWD EleSR 23-24 I No.3.4.P N 8 - Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cuttingin Brick/Stone/C.C wall 10-12Way Complete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge.

I Code:35Vol6,PWD Ele SR 23-24 I No.5.40.1 PNo. 20 - Supplying . amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted onn phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete.Complete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge.

I Code:36 Vol 6, PWD EleSR 23-24 INo.5.41.2 P No2 - Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats ofapproved paint.Complete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge.

I Code:37Vol 6, PWD Ele SR 23-24INo. 5.31 P No 19 - Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired. Complete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge

I Code:38 Vol 6 PWD Ele SR 23-24 I No.5.22 PNo.18 - Supplying, fixing and wiring 0 to 600Volts 96x96mm AC Voltmeter on existing panel/wood board. Complete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge.

I C:39 Vol 6 PWD Ele SR 23-24 I No.5.18.8 PNo.17 - Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240/450V up to 300mA sensitivity on existing wood/panel board.32-40 A 4 pole Complete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge.

Item Code:40Vol 6, PWD Ele SR 23-24 I No.5.18.8 P - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.40 A TPN Complete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge.

I Code:41.Vol6 PWD Ele SR 23-24 INo. 5.42.1 PNo.20 - Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete 14 SWGComplete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge.

I Code:42Vol6, PWD Ele SR 23-24 I No.5.42. 1PNo. 2 - Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessarycable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete14 SWG Complete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge.

I Code:43Vol6, PWD Ele SR 23-24 INo.3.5.6 P No.8 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.(9/3.5.1) 10 -12 ModuleComplete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge.Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.(9/3.5.1) 10 -12 ModuleComplete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge.

I Code:44 Vol 6, PWD Ele SR 23-24 INo 3.5.6 PNo. 8 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.(9/3.5.1) 10 -12 ModuleComplete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge.

I Code:45 Vol 6, PWD Ele SR 23-24 INo.3.6 P No 9 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. a) 6Amps one way Switchomplete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge

Item Code:46 Vol 6PWD Ele SR 23-24 INo.3.6 P No.9 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. c) 6Amps 3way socket Complete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge.

I Code:47Vol 6PWD Ele SR 23-24 I No. 3.14.6 PNo 10 - Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board.Complete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge.

I Code:48 Vol 6 PWD Ele SR 23-24 I No5.50.1 PNo.21 - Supplying and fixing of solar lux level street light control switch three phase including suitable capacity contactor 5 kW Complete with all lead and lifts including loading and unloading charges as directed by the Engineer incharge.