Minor Irrigation Department Tender

code04 - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m etc., complete with all lead and lifts and as per the directions of Engineer in charge of the work.

code05 - Providing and laying in-situ vibrated M-15 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for plain concrete works including cost of all materials, machinery, labour, cleaning, providing mortar layer for lift joints, batching, mixing, placing in position, levelling, vibrating, finishing, curing with all other ancillary operations etc., complete with all lead and lifts and as per the directions of Engineer in charge of the work.

code06 - Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, including cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, centering, formwork and scafolding and all other appurtenances required to complete the work as per technical specifications for check dam /pickups /irrigation tanks/waste weir/ sluice, sluice canal and other allied works like abutments/wing walls/returns/ cutoff walls works & all necessary works as directed and complete as per specification etc., complete with all lead and lifts and as per the directions of Engineer in charge of the work.

code07 - Steel Fabrication - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification etc., complete with all lead and lifts and as per the directions of Engineer in charge of the work.

code08 - Steel Fabrication - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification etc., complete with all lead and lifts and as per the directions of Engineer in charge of the work.

code09 - Steel Fabrication - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification etc., complete with all lead and lifts and as per the directions of Engineer in charge of the work.

code10 - Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification - Granular material etc., complete with all lead and lifts and as per the directions of Engineer in charge of the work.

code11 - Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications. Batching Plant etc., complete with all lead and lifts and as per the directions of Engineer in charge of the work.

code12 - Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials ,usage& all other appurtenaces required to complete the work etc., complete with all lead and lifts and as per the directions of Engineer in charge of the work.

code13 - Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting etc., complete with all lead and lifts and as per the directions of Engineer in charge of the work.

code14 - Design, fabrication, supply, erection and commissioning of embedded parts consisting of liners for trash rack grooves for coarse and fine screenS) with all accessories for pump house intake structure including cost of all materials, machinery, labour, cutting, aligning, anchoring, welding, finishing, cleaning, applying one coat of zinc rich epoxy primer and four coats of cold applied coal tar epoxy paint and all other ancillary operations complete as per specifications and approved drawings. Note 1. Wt of 1 set of embedded parts in tonnes 100 to 125 kg / m height 2. Quantity of structural steel 100.0 percent of computed weight for 1 set etc., complete with all lead and lifts and as per the directions of Engineer in charge of the work.

code15 - Design, fabrication, supply, erection, testing and commissioning of fixed wheel type vertical lift gate with top seal consisting of skin plate, siffeners, horizontal and vertical girders, wheels, guide rollers, rubber seals with all accessories for canal escape regulator vent including cost of all materials, machinery, labour, cutting, aligning, welding, finishing, cleaning, applying one coat of zinc rich epoxy primer and three coats of cold applied coal tar epoxy paint, seal fixing and all other ancillary operations complete as per specifications and approved drawings. Note: 1. Weight of 1 gate in tonnes 0.0888 L2 x H x h 0.659 Where L is length Clear vent width in m + 0.50 m. H is height of gate in m Clear vent height in m + 0.20 m h is head of water above sill of gate in m FSL - Sill level 2. Quantity of structural steel 92.1 % of computed weight for 1 gate etc., complete with all lead and lifts and as per the directions of Engineer in charge of the work.

code16 - Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1101.6 1200mm dia etc., complete with all lead and lifts and as per the directions of Engineer in charge of the work.

code17 - Filling available excavated earth excluding rock in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m etc., complete with all lead and lifts and as per the directions of Engineer in charge of the work.