Minor Irrigation Department Tender

Page No.7 I.No.1.8 - Providing rubble stone/boulder filling between or behind abutment/below apron including cost of all materials, labour, hand packing, finishing top surface & all necessary works as directed and complete as per specification. complete with all lead and lifts, loading and unloading as per specification, drawing and as per the direction of Engineer in charge of the work.

Valume-4 Page No. 39, Item No 2.13, - Providing and laying in-situ vibrated M-15 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for plain concrete works including cost of all materials, machinery, labour, cleaning, providing mortar layer for lift joints, batching, mixing, placing in position, levelling, vibrating, finishing, curing with all other ancillary operations complete with all lead and lifts, loading and unloading as per specification, drawing and as per the direction of Engineer in charge of the work.

Page No 130 Item No 1.12 Valume-4 - Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, including cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, centering, formwork and scafolding and all other appurtenances required to complete the work as per technical specifications for check dam /pickups /irrigation tanks/waste weir/ sluice, sluice canal and other allied works like abutments/wing walls/returns/cutoff walls works & all necessary works as directed complete with all lead and lifts, loading and unloading as per specification, drawing and as per the direction of Engineer in charge of the work.

Page No. 18 Item No 2.11e Volume 1 - Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire/soft annealed steel wire and other ancilary operations complete as per drawing and technial specification. n. all other type of structure complete with all lead and lifts, loading and unloading as per specification, drawing and as per the direction of Engineer in charge of the work.

Page No.129 I.No.1.1 Volume-4 - Providing and constructing 75 mm dia PVC pipe weep holes for concrete / masonry walls including providing 200 x 200 x 200 mm size porous concrete block made of cement and 20 mm down coarse aggregate in 1 : 4 proportion including 100 mm thick sand backing at the junction of wall and soil back fill, cost of all materials, machinery, labour & all necessary works as directed and complete as per specification. complete with all lead and lifts, loading and unloading as per specification, drawing and as per the direction of Engineer in charge of the work.

Page No. 54 Item No3.41.2, VOLUME - 4 - Providing and constructing dry rubble stone pitching with pin headers at 2 per m2 using stones and stone chips from approved source including cost of all materials, labour, hand packing / wedging stone chips, finishing and all other ancillary operations complete.41.2 300mm thick.complete with all lead and lifts, loading and unloading as per specification, drawing and as per the direction of Engineer in charge of the work. 300mm thick

Page No. 48, Item No 3.6 VOLUME - 4 - Providing casing embankment using semi-pervious / pervious soil from dump areas in layers of 250 to 300 mm ( before compaction ) including cost of all materials, machinery, labour, all other operations such as collection of soil, spreading soil in layer of specified thickness, sorting out, breaking clods, levelling, sectioning edges / sides, watering, compacting each layer to density control of not less than 95 percent or as stipulated using power roller and all other ancillary operations complete with all lead and lifts, loading and unloading as per specification, drawing and as per the direction of Engineer in charge of the work.