Minor Irrigation Department Tender

Item No 2.13, Volume-IV, PAGE No-39 - Providing and laying in-situ vibrated M-15 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for plain concrete works including cost of all materials, machinery, labour, cleaning, providing mortar layer for lift joints, batching, mixing, placing in position, levelling, vibrating, finishing, curing with all other ancillary operations complete. Complete with all lead and lifts, loading and unloading as per specification, drawing and direction of engineer in charge of work

Item No 2.3.1, Volume-I, PAGE No-16 - Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labor, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Complete with all lead and lifts, loading and unloading as per specification, drawing and direction of engineer in charge of work

Item No 2.11 h, Volume-I , PAGE No-18 - Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire/soft annealed steel wire and other ancilary operations complete as per drawing and technial specification.h. All other type of structures Complete with all lead and lifts, loading and unloading as per specification, drawing and direction of engineer in charge of work

Item No 3.6, Volume-IV, PAGE No-48 - Providing casing embankment using semi-pervious / pervious soil from dump areas in layers of 250 to 300 mm (before compaction) including cost of all materials, machinery, labor, all other operations such as collection of soil, spreading soil in layer of specified thickness, sorting out, breaking clods, leveling, sectioning edges / sides, watering, compacting each layer to density control of not less than 95 percent or as stipulated using power roller and all other ancillary operations complete. Complete with all lead and lifts, loading and unloading as per specification, drawing and direction of engineer in charge of work

Item No 6.1 , Volume-III, PAGE No-49 - Dry Lean Cement Concrete Sub-base. Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 14:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 140 kg/ m3 , optimum moisture content to be determined during trial length construction, concrete strength not to be less than 7 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 t vibratory roller, finishing and curing. IRC SP 49: 2014. 601. Complete with all lead and lifts, loading and unloading as per specification, drawing and direction of engineer in charge of work

Item No 5.31 , Volume-III, PAGE No-43 - Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight of mix and filler, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per MORTH V revision IRC-37: 2018. Complete with all lead and lifts, loading and unloading as per specification, drawing and direction of engineer in charge of work

Item No 8.11, Volume-III, PAGE No-66 - Providing and applying two coats of ready mix paint of approved brand on steel surface after thorough cleaning of surface to give an even shade Painting on Steel Surfaces 803 Complete with all lead and lifts, loading and unloading as per specification, drawing and direction of engineer in charge of work

Item No 8.1.1, Volume-II, PAGE No-41 - Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labor, curing complete as per specifications and as per directions of Engineer-in-charge

Item No 7.25, Volume-IV, PAGE No-97 - Providing inside epoxy paint coating to M.S. pipes with 1 coat of 40 micron thick zinc rich epoxy primer paint of approved quality and 3 coats of 100micron thick each coat approved quality coal tar epoxy paint for inner surface. The rates are including removing all rust/dirt, other foreign matter, cleaning surface after blasting, cost of all materials, labor, machineries, testing & all necessary works complete as per specification and approved drawings. Complete with all lead and lifts, loading and unloading as per specification, drawing and direction of engineer in charge of work

Item No 8.34, Volume-IV, PAGE No-107 - Providing and applying cardium compound of approved quality to wire ropes of hoists / gantry cranes as part of the annual maintenance including cost of all materials, machinery, labour with all other ancillary operations complete. Complete with all lead and lifts, loading and unloading as per specification, drawing and direction of engineer in charge of work

Item No 6.24, Volume-IV, PAGE No-81 - Design, fabrication, supply, erection and commissioning of embedded parts consisting of sill beam, wall plates, first stage anchors, anchor girders, anchor bars, trunnion supports, wire rope / pulley supports with all accessories for canal regulator radial gates including cost of all materials, machinery, labor, cutting, aligning, anchoring, welding, finishing, cleaning, applying one coat zinc rich epoxy primer and four coats of cold applied coal tar epoxy paint and all other ancillary operations complete as per specifications and approved drawings. Complete with all lead and lifts, loading and unloading as per specification, drawing and direction of engineer in charge of work

Item No 5.1 (i) , Volume-III, PAGE No-31 - A Prime Coat over WMM/WBM Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanical means. 502 Complete with all lead and lifts, loading and unloading as per specification, drawing and direction of engineer in charge of work

Item No8.13 (ii) , Volume-III, PAGE No-43 - Painting Lines, Dashes, Arrows etc on Roads in Two Coats on New Work, Painting lines, dashes, arrows etc on roads in two coats on new work with ready mixed road marking paint conforming to IS:164:2015 on bituminous surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control (ii) Up to 10 cm in width. Complete with all lead and lifts, loading and unloading as per specification, drawing and direction of engineer in charge of work

Item No 6.5, Volume-III, PAGE No-50 - Pavement Quality M30 grade Concrete (RMC) with OPC & GGBS laid using Pave. Construction of M30 Grade un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with OPC @ 270 kg/m3 and GGBS@ 90 kg/m3 , coarse and fine aggregate conforming to IS 383:2016, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design transported to site, laid with a paver finisher, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, deboning strip, dowel bar, tie rod, admixtures, curing compound, steel channels, finishing to lines and grades as per drawing. Complete with all lead and lifts, loading and unloading as per specification, drawing and direction of engineer in charge of work

Item No 11.25.2 Volume-II, PAGE No-84 - Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labor, usage charges of machinery complete as per specifications and as per directions of the Engineer-in Charge

Item No 11.58 Volume-II, PAGE No-95 - Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer in-charge. (Made of G.I. wire of dia 4 mm). Complete with all lead and lifts, loading and unloading as per specification, drawing and direction of engineer in charge of work

Item No 11.57 Volume-II, PAGE No-95 - Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per meter cost of total length of barbed wire used With G.I. barbed wire. Complete with all lead and lifts, loading and unloading as per specification, drawing and direction of engineer in charge of work

Item No 8.39 Volume-II, PAGE No-48 - Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labor complete as per specifications and as per directions of Engineer-in-charge

Item No 8.10 Volume-III, PAGE No-66 - Painting Two Coats on New Concrete Surfaces Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces 803. Complete with all lead and lifts, loading and unloading as per specification, drawing and direction of engineer in charge of work

Item No 6.14.1 Volume-IV, PAGE No-77 - Design, fabrication, supply, erection and commissioning of embedded parts consisting of sill beam, wheel tracks, seal seats, guide rails, breast wall liner up to 1m height above the roof of vent with all accessories for river / canal sluice emergency gate including cost of all materials, machinery, labor, cutting, aligning, welding anchoring, finishing, cleaning, applying one coat of zinc rich epoxy primer and four coats of cold applied coal tar epoxy paint and all other ancillary operations complete as per specifications and approved drawings. Without groove liners. Complete with all lead and lifts, loading and unloading as per specification, drawing and direction of engineer in charge of work

Item No 5- Zone-4 PAGE No-A-50 - IV Un-Skilled. Office staff and Drivers. For Watchman, Three watchman/day (8 hr Per person)