Minor Irrigation Department Tender

Four - Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications) Size 80 mm

Five - Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications) Size 80 mm

Six - Supply, installing, testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrical Protection Like single Phase preventor, under voltage over Voltage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOLDirect Online Starter 2)S-D- Star Delta Starter etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications) 6 to 15 HP pumps

Seven - Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at the location of respective pump sets etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

Eight - Supply and delivery at site delivery of best indigenous brand new MCB Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/25/40 Amps with scalable box etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

Nine - Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar and other end fitted with protective cover) etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications) Size 80 mm

Ten - Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges, tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

Eleven - Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as per specification, with testing of as per instructions of engineer incharge of work etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

Twelve - Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials, tools and equipments, as per specifications with testing of as per instructions of engineer incharge of work etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications) 3 1/2 x 16 sqmm

Thirteen - Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

Fourteen - Supply and delivery at site brand new best make Foot valve suitable for centrifugal pump upto 10HP confirming with ISI mark and its latest amendments etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

Fifteen - Supply and delivery at site brand new best make level guage suitable for centrifugal pump confirming to latest IS standards etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

Sixteen - Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest amendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bends, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. Note: Upto 110mm dia Coil shall be used. etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications) HDPE Grade PE80-PN16.0, 75mm dia