Minor Irrigation Department Tender

code04 - Supplying and spare materials suitable providing of L&T make OCB base plate with studs etc,. Complete providing & fixing contacts for OCB and providing of moving copper contacts or providing of novelts copper coils with cour (3 No's) and providing of bakelite buses for study in OCB, providing and fixing of 100 sq.mm copper lugs (cripping) or wonder make RYB steel grip pvc tape and steel tension blade. On volt coil with OCB required oil and labour charges for dismantling and reassembly the OCB unit with new parts, repairing for connecting with load condition and filling complete job.

code05 - Transformer Oil @ Jackwell as per Engineer In Charges

code06 - SAE 10 OIL @ Jackwell as per Engineer In Charges

code07 - Grease GEM-RR3 @ Jackwell as per Engineer In Charges

code08 - Repair and overhauling of OLTC each Divertor switch including change of oil, lubrication and replacement of gaskets and other parts which are locally available FOR 500 MVA For 400/220 kV - 33 kV Class

code09 - Enganging pump operator for pump operation at Jackwell, for 8 months, Enganging one operator for day and one operator for night.

code10 - Engaged patkari/ neeragnti/ sowdies for water management during day and night at volnarable pionts to push water to atchkat, recording the demand statement and to aviod damages of the canal etc,. for 8 months

code11 - Eliganur LIS : Supplying of spare parts to 60 HP oil lubricated DWT pump to facilitate from the site to workshop by removing motor turbine base, tee joint, column pipes, line shaft and bowl assembly etc., Complete, supplying of spare parts to bowl assembly by providing and fixing of gun metal casted, machining, turning, boring and finishing for required sizes and fixing of suction and discharge case bearing, interstage case bearing, supplying of spare parts to trueness and truing of bowl assembly stainless shaft with S.S welding, turning, maching for orginal dimensions of the shaft, supplying of spare parts to trueness and trueing the impeller including inner finishing for shaft sizes and externally machining to requied sizes, supplying of spare parts to the TT nut with replacing new GM bush, supplying of spare parts to stuffing box by means of boring, turing, and internally left hand thearding for oil tube sizes, supplying of spare to gland rope for TT nut, supplying of spare parts to adopter screw gun metal bearing including cost of new gun metal bush and machining for bowl assembly shaft sizes, supplying of spare parts to line shaft of all sizes including welding and turning for required sizes, supplying of spare parts to oil tubes by cutting both ends of each 5 ft length oil tube including jionting of new MS tubes suitable for oil tubes with internally left hand turning for bearing sizes, supplying of spare parts to oil lubricated gun metal bearings suitable pattern casted internally machining and finishing fot line shaft sizes and externally turning machining and left hand treading as per the sample original bearing supplying of spare parts to bolts and nuts packing rubber gland rope etc,. jointing materials after attending all repairs same as to facilited from work shope to site and re errection of pump after attending job works including assembling all the parts with errection and trail running ect,. complete.

code12 - Winding of 60 HP DWT 3 phase induction motor Kirloskar/ Jothi/ Croption greaves make motor with 'B' class insulating materials such as triple papers, emperor cloth, cotton rape, varnish (oil) air dry, fiber glass sleeves, legs stripping with 7/16 end connection and suitable for above motor HTP (ISI) make class-1 working with 100 degree C heat gauge enamel coated and insulating copper winding wire required as per original make. Labour charges to lifiting and the above motor including transporation charges from site to workshop and return to site and overolling and trail run at site etc,. Complete in the direction of incharge Engineer.

code13 - Supplying starter spares for 125 Amps air brake ATS starter replacement of suitable contacts on volt coil, timer, pushing timer, pilot lamp, amps meter and volt meter, turnel plate, push botton, MCB, Bassbar plate, a/m plates, 716 flexible copper pvc coated wire 3 If contacter for suitable HP, tripping relay unit, CT relaying, CT coil, HRC fuse function etc,. And complete with all lead and lifts including loading and unloading as per the directions of Engineer-in-charge of work.

code14 - Supplying and spare materials suitable providing of L&T make OCB base plate with studs etc,. Complete providing & fixing contacts for OCB and providing of moving copper contacts or providing of novelts copper coils with cour (3 No's) and providing of bakelite buses for study in OCB, providing and fixing of 100 sq.mm copper lugs (cripping) or wonder make RYB steel grip pvc tape and steel tension blade. On volt coil with OCB required oil and labour charges for dismantling and reassembly the OCB unit with new parts, repairing for connecting with load condition and filling complete job.

code15 - Transformer Oil @ Jackwell as per Engineer In Charges

code16 - SAE 10 OIL @ Jackwell as per Engineer In Charges

code17 - Grease GEM-RR3 @ Jackwell as per Engineer In Charges

code18 - Repair and overhauling of OLTC each Divertor switch including change of oil, lubrication and replacement of gaskets and other parts which are locally available FOR 167 MVA For 33 kV Class

code19 - Enganging pump operator for pump operation at Jackwell, for 8 months, Enganging one operator for day and one operator for night.

code20 - Engaged patkari/ neeragnti/ sowdies for water management during day and night at volnarable pionts to push water to atchkat, recording the demand statement and to aviod damages of the canal etc,. for 8 months