Minor Irrigation Department Tender

Providing and fixing 25 mm dia 3 m long cold twisted deformed steel dowel bars with one end driven into 38 mm dia 1.5 mtr deep hole drilled in bed rock and other end provided with L-bend for embendding in concrete / masonry of over flow / now-over flow blocks and other appurtenant works including cost of drilling and cleaning hole filling hole with thick cement slurry, driving anchor rod, cost of all materials, labour, machinery etc., complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work. ( Ref :- As per relevant IS)

Providing and laying insitu vibrated M-20 (28 days cube compressive strength not less than 20 N/ sq mm) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates including cost of all materials, machinery, labour, formwork, centering, scaffolding cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete for RCC works of gallery, sluice, spillway crest, spillway d/s face, energy dissipating structure, training walls, piers, abutments and such oter location etc., complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work. ( Ref :- As per relevant IS)

Providing and laying insitu vibrated M-25 (28 days cube compressive strength not less than 25 N/ sq mm) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates for deck slab and kerb including cost of all materials, machinery, labour, formwork scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work. ( Ref :- As per relevant IS)

Providing and laying insitu vibrated M-25 (28 days cube compressive strength not less than 25 N/ sq mm) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates for wearing coat including cost of all materials, machinery, labour, formwork, cleaning,batching, mixing, placing in position in alternate panels, levelling, compacting, finishing curing, packing joints with asphalt mortar etc., complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work. ( Ref :- As per relevant IS)

KSRRB M2700-2, Construction of precast RCC railing of M-30 gradeaggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500 centre to centre spacing between vertical post not to exceed 2000mm, leaving adequate space between vertical post of expansion, complete as aper approved drawings and technical specification including cost of materials labouor, HOM complete as per specification. MORTH specification No. 2703, 1500, 1600 & 1700 etc., complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work. ( Ref :- As per relevant IS)

Providing, fabricating and placing in position reinforcement steel for RCC structures including cleaning, straightening, cutting, bending, lapping / welding joints wherever required, tying with 1.25 mm dia soft annealed steel wire, including cost of all materials, machinery, labour etc., complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work. ( Ref :- As per relevant IS)

Providing homogeneous embankment using soil from approved borrow area in layers of 250 to 300 mm before compaction including cost of all materials, machinery, labour, all operations such as excavations, sorting out, transportation, spreading soil in layer of specified thickness, breaking clods, sectioning, watering, compacting to density control of not less than 95 percent using power roller etc., complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work. ( Ref :- As per relevant IS)

Supply and fixing of FRP "C" section frame of size 100 mm and wall thickness of 8 mm (# 1 mm) and Rib thickness of 12 mm smooth finish with marine grade gel coat, with side projections at every 1 Mtr, interval to hold the frame firmly in concrete including tie bar at top and key holes provided to tie the binding wire with reinforcement to maintain the alignment. FRP frames should be flushed to the top of the pier level after concreting to avoid damages of frames by debris of flood water, Binding of glass fibre mat must be Isoptholic polyester resin of marine grade with UV stablizer to with stand all weather conditions and saline water for any size. Anchor brackets to be provided to avoid the uplift of needles on either side of the groove. etc., complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work. ( Ref :- As per relevant IS)

KSRRB M 2600.4 (iii) Providing and fixing in position 300 mm wide, 20 mm thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10 m to cater for a horizontal movement upto 20 mm, covered with sealant complete as per drawing & Technical specification MORTH specification no 2605 etc., complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work. ( Ref :- As per relevant IS)

Supplying and fixing FRP Needles made out of concealed GI tubes 40 X 60 mm wall thickness of 2 mm, Zinc coating of not less than 360 GSM, I.S make hot rolled from any reputed pipe manufacturing company. FRP wrapping all-round the pipe minimum thicknes of 4 mm and wall thickness of plates not less than 6 mm. made out of isoptholic polyester resing UV stabilized marine grade and fibre glass chopped strands of 450 GSM electrical grade with gel coat finish. The water seals to be made out of synthetic rubber (EPDM) and housed in anodized aluminium housing as per design and drawing issued according to site conditions with the warranty of 5 years for any manufacturing defects (0 to 2 mtr height). etc., complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work. ( Ref :- As per relevant IS)

Supplying and fixing FRP Needles made out of concealed GI tubes 40 X 60 mm wall thickness of 2 mm, Zinc coating of not less than 360 GSM, I.S make hot rolled from any reputed pipe manufacturing company. FRP wrapping all-round the pipe minimum thicknes of 4 mm and wall thickness of plates not less than 6 mm. made out of isoptholic polyester resing UV stabilized marine grade and fibre glass chopped strands of 450 GSM electrical grade with gel coat finish. The water seals to be made out of synthetic rubber (EPDM) and housed in anodized aluminium housing as per design and drawing issued according to site conditions with the warranty of 5 years for any manufacturing defects (2 to 3 mtr height). etc., complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work. ( Ref :- As per relevant IS)

Supplying and fixing FRP Needles made out of concealed GI tubes 40 X 60 mm wall thickness of 2 mm, Zinc coating of not less than 360 GSM, I.S make hot rolled from any reputed pipe manufacturing company. FRP wrapping all-round the pipe minimum thicknes of 4 mm and wall thickness of plates not less than 6 mm. made out of isoptholic polyester resing UV stabilized marine grade and fibre glass chopped strands of 450 GSM electrical grade with gel coat finish. The water seals to be made out of synthetic rubber (EPDM) and housed in anodized aluminium housing as per design and drawing issued according to site conditions with the warranty of 5 years for any manufacturing defects (3 to 4 mtr height). etc., complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work. ( Ref :- As per relevant IS)

Providing and constructing 75 mm dia PVC pipe weep holes for concrete / masonry walls including providing 200 x 200 x 200 mm size porous concrete block made of cement and 20 mm down coarse aggregate in 1:4 proportion including 100 mm thick sand backing at the junction of wall and soil back fill, cost of all materials, machinery, labour etc., complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work. ( Ref :- As per relevant IS)

KSRRB M2700-5 Drainage spouts using 100 mm class "B" GI pipe as per drawing and Technical specification including clamps and nuts etc., including cost of of materials, labour, HOM complete as per specification MORTH specifiction no 2705. etc., complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work. ( Ref :- As per relevant IS)

Purchase and Supplying of New Bolero B6(O) vehicle for use of office (Inclusive of sales tax Insurance amount road tax, accessories amount and Extended warranty amount etc., as applicable). The contractor should quote showroom rate including GST, insurance amount, road tax, accessories amount and extended warranty amount etc., as applicable.