Minor Irrigation Department Tender

Common SR 2023-24 Vol-5,Pg.No.139 Item No.12.1.1 - Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete) -For Borewell depth of 0 to 50 Mtrs, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge.

Common SR 2023-24 Vol-5,Pg.No.139 Item No.12.1.2 - Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete) -For Borewell depth of 50 to 100 Mtrs, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge.

Common SR 2023-24 Vol-5,Pg.No.139 Item No.12.1.3 - Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete) -For Borewell depth of 100 to 150 Mtrs, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge.

Common SR 2023-24 Vol-5,Pg.No.140 Item No.12.4 - Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers's method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE: 1) Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M - 15%, b) Above 30 M - 30% (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100/- is to be deducted for Dry Borewell towards yield test. etc., complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge.

Common SR 2023-24 Vol-5,Pg.No.152 Item No.13.13.6 - Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary ammendments and instructions of engineer incharge of work. For 3 HP etc. complete-For 5.00 HP - 90 LPM @ 110 m = 15 STG Outlet Dia - 2.00", complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge.

Common SR 2023-24 Vol-5,Pg.No.155 Item No.13.27.1 - Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar and other end fitted with protective cover)-50 mm, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge.

Common SR 2023-24 Vol-5,Pg.No.154 Item No.13.22.3 - Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments-1x3x4 Sqm, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge.

Common SR 2023-24 Vol-5,Pg.No.154 Item No.13.25.1 - Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge.

Common SR 2023-24 Vol-5,Pg.No.156 Item No.13.32 - Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge.

Common SR 2023-24 Vol-6, Pg.No.14 Item No.5.5.1 - Supplying of TPST with rewirable porcelain channels in SM enclosure. Made out of 14SWG powder coated paint of approved colour-32A, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge.

Common SR 2023-24 Vol-6, Pg.No.57 Item No.13.18.1 - Fixing of 15A to 63A TPST /change over switch/Contactor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labelling, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge.

Common SR 2023-24 Vol-5,Pg.No.154 Item No.13.23.2 - Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOL- Direct Online Starter 2) S-D- Star Delta Starter etc. complete-For 3 to 6 HP pumps, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge.

Common SR 2023-24 Vol-6, Pg.No.19 Item No.5.38 - Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C., complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge.

Common SR 2023-24 Vol-6, Pg.No.5 No.2.3.3 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100Vgrade, multi strand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010-For 2.5 mm2, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge.

Common SR 2023-24 Vol-6, Pg.No.14 Item No.5.6.5 - Supply and fixing polished woodboard made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws- For 15" x 12" x 2", complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge.

Common SR 2023-24 Vol-6, Pg.No.14 Item No.5.6.6 - Supply and fixing polished woodboard made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws- For 20" x 20" x 2.5", complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge.

Common SR 2023-24 Vol-6, Pg.No.19 Item No.5.37 - Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS2834. 3phase, 400/440V grade, for power factor improvement of rotating machineries like induction motor, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge.

Common SR 2023-24 Vol-6, Pg.No.14 Item No.5.4.1 - Fixing a shunt capacitor upto 5 kVAR capacity with necessary clamps, bolts, and nuts on existing wooden or metal board including banking of more than one capacitor, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge.

Common SR 2023-24 Vol-6, Pg.No.5 Item No.2.1.1 - Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.5Sqmm (Phase&Neutral) & 1x1.0sqmm (Earthwire) FRLS multi strand PVC insulated copper wire (confirming to IS-694:and latest amendments)with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/gang box ,the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.-Short point upto 3Mtr from tapping point to out let via switch, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge.

Common SR 2023-24 Vol-6, Pg.No.17 Item No.5.18.1 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing material sand 'C' Type curve, indicatorON/OFF,energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC60898.-6-32 A SP, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge.

Common SR 2023-24 Vol-6, Pg.No.14 Item No.5.7.2 - Supplying & fixing of Porcelain fuse channel with cutout on existing wooden/panel using necessary nuts, bolts and washers-32 A, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge.

Common SR 2023-24 Vol-6, Pg.No.19 Item No.5.35 - Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63A three phase 4wire whole current class-1 Accuracy Energy Meter, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge.

Common SR 2023-24 Vol-6, Pg.No.19 Item No.5.20.8 - Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board.-32-40A 4 pole, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge.

Common SR 2023-24 Vol-6, Pg.No.5 Item No.2.3.4 - Wiring for lighting /power circuit using one of FRLS PVC insulated 1100V grade, multi strand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010-4 mm2, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge.

Common SR 2023-24 Vol-6, Pg.No.2 Item No.1.1.3 - Supplying heavy gauge PVC conduit pipe 32 mm dia 2.5 mm thick confirming to IS2509 with suitable size bends, junction boxes, adhesive paste etc, and fixing using inverted woodplugs incase of RCC ceiling and RCC wall /stone structure or rawl plugs incase of brickwall sand cement plastering the damaged portion using heavygauge saddles at an interval of 700mm using NF screws, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge.

Common SR 2023-24 Vol-5,Pg.No.156 Item No.13.35.1 - Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials ,tools and equipments,as per specificationswith testing of as per instructions of engineer incharge of work.-2 x 10 sqmm, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge.

Common SR 2023-24 Vol-1, Pg.No.6 Item No.1.6.1 - Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work.-In all kinds of soils. Depth upto 1.50m, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge.

Common SR 2023-24 Vol-1, Pg.No.7 Item No.1.10 - Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge.

Common SR 2023-24 Vol-5,Pg.No.127 Item No.11.2.5 - Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For: Medium Duty GI pipe of 40mm dia, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge.

Common SR 2023-24 Vol-5,Pg.No.157 Item No.13.39 - Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge.

Common SR 2023-24 Vol-5,Pg.No.156 Item No.13.35.3 - Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials ,tools and equipments,as per specificationswith testing of as per instructions of engineer incharge of work. For 3.5 x 10, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge.

Common SR 2023-24 Vol-5,Pg.No.155 Item No.13.31 - Supply and delivery at site Stringing of heavy duty Naylone/PP rope with ISI etc complete suitable for Single phase Pumpsets, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge.

Common SR 2023-24 Vol-5,Pg.No.116 Item No.10.6 - RCC hume pipe Circular pump house: Providing precast RCC Circular Hume pipe pump house with M.S door and RCC conical roof as per specification and drawings - Internal dia Mtr. 1200 mm & height of 2.5 Mtr. With Wall thickness 65mm etc. , complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge.

Common SR 2023-24 Vol-5,Pg.No.116 Item No.10.7 - Erection and positioning of RCC Hume pipe pump house/Cistern on size stone masory platform including transportation charges and handling,finishing with all necessary tools ,plants and materials etc.,, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge.