Minor Irrigation Department Tender

code04 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates. complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code05 - Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code06 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code07 - Providing new embankment abutting to existing bund to strength the existing bund using soil from approved borrow area in layers of 200 to 250 mm and compacting each layer to density control of not less than 95 percent by vibrating plate compactor or pnuematic tamper including cost of all materials, machinery, labour, picking previous layer, spreading soil in layer, breaking clods, watering & all necessary works as directed and complete as per specification. complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code08 - Removing disturbed rough / size stone revetment 300 mm thick with 150 mm thick 40 mm down aggregate backing and resetting the same using the available stones and aggregate including packing, wedging, finishing & all necessary works as directed and complete as per specification. complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code09 - Providing and constructing 450 mm thick hand packed rough stone revetment consisting of 300 mm thick rough stones with 400 to 450 mm long through stones at 1.5 m c / c over a backing of 150 mm thick 40 mm down graded coarse aggregate layer including cost of all materials machinery, labour, laying to specified slope, wedging with chips, finishing & all necessary works as directed and complete as per specification. complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code10 - Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge & MoRTH specification 804, The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work. complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code11 - WASTE WEIR : Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code12 - Providing cement mortar pointing to coursed rubble ( size stone ) face stone masonry in CM 1 : 2 proportion by volume including cost of all materials, labour, raking and cleaning joints for 50 mm depth, batching and mixing mortar, pressing mortar into joints, finishing, curing and all other ancillary operations complete. complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code13 - SLUICE : Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code14 - Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code15 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code16 - Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in double row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets as per Clause 1101.6. (750mm dia) complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code17 - Fabrication, supply, erection, testing and commissioning of plug and rod type hoist assembly consisting of truncated upright cone type cast iron plug fixed to alloy steel screw hoist with supporting structure for operating circular sluice openings including cost of all materials, labour, machinery, cutting, aligning, anchoring, welding, finishing, cleaning, applying one coat zinc chromate red oxide primer and three coats anti corrosive bitumineous black paint & all necessary works as directed and complete as per specification. complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code18 - Design, fabrication, supply, erection and commissioning of embedded parts consisting of sill beam, wheel tracks, seal seats, guide rails etc., with all accessories for vertical lift barrage gate including cost of all materials, machinery, labour, cutting, aligning, anchoring, welding,finishing, cleaning, applying one coat of zinc rich epoxy primer and four coats of cold applied coal tar epoxy paint all other ancillary operations complete as per specifications and approved drawings. complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code19 - Design, fabrication, supply, erection, testing and commissioning of sliding type interchangeable stoplog gate elements consisting of skin plate, stiffeners, horizontal and vertical girders, lifting hooks, bronze padded slide blocks, guide shoes, rubber seals etc., with all accessories for canal regulator vent including cost of all materials, machinery, labour, cutting, aligning, welding, finishing, cleaning, applying one coats of zinc rich epoxy primer and three coats of cold applied coal tar epoxy paint, seal fixing and all other ancillary operations complete as per specifications and approved drawings. complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.