Minor Irrigation Department Tender

Item No 2.13, Volume-4 Part II, MI SR PAGE No-39 - Providing and laying in-situ vibrated M-15 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for plain concrete works including cost of all materials, machinery, labor, cleaning, providing mortar layer for lift joints, batching, mixing, placing in position, leveling, vibrating, finishing, curing with all other ancillary operations complete, complete with all lead and lift, loading and unloading charges, labor equipment and hire charges of machineries cost and conveyance of all materials, including shoring and strutting including dewatering etc, complete as per detailed specification and as directed by Engineer-in-charge

Item No 1.12, Volume-4 Part II, MI SR PAGE No-130 - Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates as per relevant IS Codes machine mixed with super plasticizers, laid in layers, well compacted using needle vibrators, including cost of all materials of quality, confirming to the requirements of relevant IS codes, labor, Usage charges of machinery, curing, centering, formwork and scaffolding and all other appurtenances required to complete the work as per technical specifications for check dam /pickups /irrigation tanks/waste weir/ sluice, sluice canal and other allied works like abutments/wing walls/returns/cutoff walls works & all necessary works as directed and complete as per specification, complete with all lead and lift, loading and unloading charges, labor equipment and hire charges of machineries cost and conveyance of all materials, including shoring and strutting including dewatering etc, complete as per detailed specification and as directed by Engineer-in-charge

Item No 2.11 e, Volume-I , PAGE No-18 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labor, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancillary operations complete as per drawing and technical specification, e. Dam & Allied Works, complete with all lead and lift, loading and unloading charges, labor equipment and hire charges of machineries cost and conveyance of all materials, including shoring and strutting including dewatering etc, complete as per detailed specification and as directed by Engineer-in-charge

Item No 1.8, Volume-4 Part II, MI SR PAGE No-130 - Providing rubble stone/boulder filling between or behind abutment below apron including cost of all materials, labor, hand packing, finishing top surface & all necessary works as directed and complete as per specification., complete with all lead and lift, loading and unloading charges, labor equipment and hire charges of machineries cost and conveyance of all materials, including shoring and strutting including dewatering etc, complete as per detailed specification and as directed by Engineer-in-charge

Item No 3.44.1, Volume-4 Part II, MI SR PAGE No-54 - Providing and constructing dry size stone pitching using 200 to 250 mm size stones with pin headers at 2 per m2 using stones and stone chips from approved source including cost of all materials, labor, hand packing / wedging stone chips into joints, finishing and all other ancillary operations complete. 300 mm thick., complete with all lead and lift, loading and unloading charges, labor equipment and hire charges of machineries cost and conveyance of all materials, including shoring and strutting including dewatering etc, complete as per detailed specification and as directed by Engineer-in-charge

Item No 1.8, Volume-1, PAGE No-7 - Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. complete as per detailed specification and as directed by Engineer-in-charge

Item No.1.1 SR 2023 -24 ,PAGE NO.129 - Providing and constructing 75mm dia PVC weep holes for concrete/ Masonry walls including providing 200x200x200mm size porous concrete blocks made of cement and 20mm down course aggregate in 1:4 proportion including 100mm thick sand backing at the junction of wall and soil backfill, cost of all materials, machinery, labour etc., complete with all lead and lift, loading and unloading charges, labor equipment and hire charges of machineries cost and conveyance of all materials, including shoring and strutting including dewatering etc, complete as per detailed specification and as directed by Engineer-in-charge