Minor Irrigation Department Tender

code04 - Supplying spare parts to Foot Valve for maintanance to facilitate from site to workshop for Reconditioning of Foot Valve. Tongue pins are replace by making new pins with SS shaft, Tongue Gun metal bushes are replaced by new gun metal bushes with machining for required sizes, providing and fixing of new foot valve leather, providing and fixing of packing rubber, supplying of bolts and nuts, catrol grease for the foot valve, after attending all repairs same has to facilitate from workshop to site and Re erection of Foot valve after attending JOBs including assembling all the parts with erection and trail running etc, complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code05 - Winding of 200 HP DWT 3 phase induction motor Kirloskar/ Jothi/ Croption greaves make motor with 'B' class insulating materials such as triple papers, emperor cloth, cotton rape, varnish (oil) air dry, fiber glass sleeves, legs stripping with 7/16 end connection and suitable for above motor HTP (ISI) make class-1 working with 100 degree C heat gauge enamel coated and insulating copper winding wire required as per original make. Labour charges to lifiting and the above motor including transporation charges from site to workshop and return to site and overolling and trail run at site etc,. complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code06 - Supplying starter spares for 200 Amps air brake ATS starter replacement of suitable contacts on volt coil, timer, pushing timer, pilot lamp, amps meter and volt meter, turnel plate, push botton, MCB, Bassbar plate, a/m plates, 716 flexible copper pvc coated wire 3 If contacter for suitable HP, tripping relay unit, CT relaying, CT coil, HRC fuse function etc,. And complete with all lead and lifts including loading and unloading as per the directions of Engineer-in-charge of work.

code07 - Supplying and spare materials suitable providing of L&T make OCB base plate with studs etc,. Complete providing & fixing contacts for OCB and providing of moving copper contacts or providing of JOBvelts copper coils with cour (3 no's) and providing of bakelite buses for study in OCB, providing and fixing of 100 sq.mm copper lugs (cripping) or wonder make RYB steel grip pvc tape and steel tension blade. On volt coil with OCB required oil and labour charges for dismantling and reassembly the OCB unit with new parts, repairing for connecting with load condition and filling complete job.complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code08 - FCMA BASED SOFT STATER Supply ererction delivery and commssioning of (FCMA) Flux compensated magnetic amplifler tchnology control panel for smooth starting by toqure control and reduction in starting current etc., The soft starter should have the following componeuts. 1)8.No.Air break 100A Contractor. 2) 1 No. Air break 60A contractor for make and break. 3) 2 No. Resin cast dual core current transformers of sultable ratio burden and class of accuracy conforming to latest IS 2795 with 15 VA burden for protection class 5 P 10.4) 3 No. current transformer with 15 VA burden class for metering. 5) 1 No.0.5 to 0.6 secs pneumatic ON/OFF delay timer for automatic change over to full voltage.6) 1 Set of start/stop Push buttonbs conforming to the latest ISS 6875. 7) 1 Set on/off indicating lamps.8) 1 No.digital type am motor with suitable CT's OF Approprate ratio. 9) 1 No.Digital Voltmeter.10) 1No. Ammeyer selector switch etc., As for water board Specifications. For 450.00 Amps.complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code09 - Transformer Oil complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code10 - SAE 10 OIL complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code11 - Grease GEM-RR3 complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code12 - Hyati LIS: Supplying of spare parts to 90 HP oil lubricated DWT pump to facilitate from the site to workshop by removing motor turbine base, tee joint, column pipes, line shaft and bowl assembly etc., Complete, supplying of spare parts to bowl assembly by providing and fixing of gun metal casted, machining, turning, boring and finishing for required sizes and fixing of suction and discharge case bearing, interstage case bearing, supplying of spare parts to trueness and truing of bowl assembly stainless shaft with S.S welding, turning, maching for orginal dimensions of the shaft, supplying of spare parts to trueness and trueing the impeller including inner finishing for shaft sizes and externally machining to requied sizes, supplying of spare parts to the TT nut with replacing new GM bush, supplying of spare parts to stuffing box by means of boring, turing, and internally left hand thearding for oil tube sizes, supplying of spare to gland rope for TT nut, supplying of spare parts to adopter screw gun metal bearing including cost of new gun metal bush and machining for bowl assembly shaft sizes, supplying of spare parts to line shaft of all sizes including welding and turning for required sizes, supplying of spare parts to oil tubes by cutting both ends of each 5 ft length oil tube including jionting of new MS tubes suitable for oil tubes with internally left hand turning for bearing sizes, supplying of spare parts to oil lubricated gun metal bearings suitable pattern casted internally machining and finishing fot line shaft sizes and externally turning machining and left hand treading as per the sample original bearing supplying of spare parts to bolts and nuts packing rubber gland rope etc,. jointing materials after attending all repairs same as to facilited from work shope to site and re errection of pump after attending JOBs including assembling all the parts with errection and trail running ect,. complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code13 - Supplying of spare parts and repair re conditioning, trail running of 10" sizes sluice valve including dismentaling and fecilete from site work to work shop by removing from delivery end of T joint including supply of spare parts gun metal bushs hingers shop, stainless steel square thredding shaft square thredding shaft gum metal nut guld ring to tongue suitable sizes, paking rubber bolt and nuts with washers of required sizes, and othe jointing material the involves this melting nessesery repals including thredding, streting, turning, machining, finishing etc,. complete with attending all nessesery JOBs including assembling all the parts with errection and trail running etc,. complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code14 - Supplying of spare parts and repair re conditioning, trail running of 10" sizes N.R. valve including dismentaling and fecilete from site work to work shop by removing from delivery end of T joint including supply of spare parts gun metal bushs hingers shop, stainless steel square thredding shaft square thredding shaft gum metal nut guld ring to tongue suitable sizes, paking rubber bolt and nuts with washers of required sizes, and othe jointing material the involves this melting nessesery repals including thredding, streting, turning, machining, finishing etc,. complete with attending all nessesery JOBs including assembling all the parts with erection and trail running etc,.complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code15 - Supplying spare parts to Foot Valve for maintanance to facilitate from site to workshop for Reconditioning of Foot Valve. Tongue pins are replace by making new pins with SS shaft, Tongue Gun metal bushes are replaced by new gun metal bushes with machining for required sizes, providing and fixing of new foot valve leather, providing and fixing of packing rubber, supplying of bolts and nuts, catrol grease for the foot valve, after attending all repairs same has to facilitate from workshop to site and Re erection of Foot valve after attending JOBs including assembling all the parts with erection and trail running etc, complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code16 - Winding of 90 HP DWT 3 phase induction motor Kirloskar/ Jothi/ Croption greaves make motor with 'B' class insulating materials such as triple papers, emperor cloth, cotton rape, varnish (oil) air dry, fiber glass sleeves, legs stripping with 7/16 end connection and suitable for above motor HTP (ISI) make class-1 working with 100 degree C heat gauge enamel coated and insulating copper winding wire required as per original make. Labour charges to lifiting and the above motor including transporation charges from site to workshop and return to site and overolling and trail run at site etc,. complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code17 - Supplying starter spares for 125 Amps air brake ATS starter replacement of suitable contacts on volt coil, timer, pushing timer, pilot lamp, amps meter and volt meter, turnel plate, push botton, MCB, Bassbar plate, a/m plates, 716 flexible copper pvc coated wire 3 If contacter for suitable HP, tripping relay unit, CT relaying, CT coil, HRC fuse function etc,. And complete with all lead and lifts including loading and unloading as per the directions of Engineer-in-charge of work.

code18 - Supplying and spare materials suitable providing of L&T make OCB base plate with studs etc,. Complete providing & fixing contacts for OCB and providing of moving copper contacts or providing of JOBvelts copper coils with cour (3 no's) and providing of bakelite buses for study in OCB, providing and fixing of 100 sq.mm copper lugs (cripping) or wonder make RYB steel grip pvc tape and steel tension blade. On volt coil with OCB required oil and labour charges for dismantling and reassembly the OCB unit with new parts, repairing for connecting with load condition and filling complete job.complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code19 - OLTC of Power Transformers: Repair and overhauling of OLTC each Divertor switch including change of oil, lubrication and replacement of gaskets and other parts which are locally available. 400/220 kV - 33 kV Class, per Transformer, 9988, 315 KVA.complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code20 - Transformer Oil complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code21 - SAE 10 OIL complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code22 - Grease GEM-RR3 complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code23 - Mundaragi site-01 LIS: Supplying of spare parts to 125 HP oil lubricated DWT pump to facilitate from the site to workshop by removing motor turbine base, tee joint, column pipes, line shaft and bowl assembly etc., Complete, supplying of spare parts to bowl assembly by providing and fixing of gun metal casted, machining, turning, boring and finishing for required sizes and fixing of suction and discharge case bearing, interstage case bearing, supplying of spare parts to trueness and truing of bowl assembly stainless shaft with S.S welding, turning, maching for orginal dimensions of the shaft, supplying of spare parts to trueness and trueing the impeller including inner finishing for shaft sizes and externally machining to requied sizes, supplying of spare parts to the TT nut with replacing new GM bush, supplying of spare parts to stuffing box by means of boring, turing, and internally left hand thearding for oil tube sizes, supplying of spare to gland rope for TT nut, supplying of spare parts to adopter screw gun metal bearing including cost of new gun metal bush and machining for bowl assembly shaft sizes, supplying of spare parts to line shaft of all sizes including welding and turning for required sizes, supplying of spare parts to oil tubes by cutting both ends of each 5 ft length oil tube including jionting of new MS tubes suitable for oil tubes with internally left hand turning for bearing sizes, supplying of spare parts to oil lubricated gun metal bearings suitable pattern casted internally machining and finishing fot line shaft sizes and externally turning machining and left hand treading as per the sample original bearing supplying of spare parts to bolts and nuts packing rubber gland rope etc,. jointing materials after attending all repairs same as to facilited from work shope to site and re errection of pump after attending JOBs including assembling all the parts with errection and trail running ect,.complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code24 - Supplying of spare parts and repair re conditioning, trail running of 10" sizes sluice valve including dismentaling and fecilete from site work to work shop by removing from delivery end of T joint including supply of spare parts gun metal bushs hingers shop, stainless steel square thredding shaft square thredding shaft gum metal nut guld ring to tongue suitable sizes, paking rubber bolt and nuts with washers of required sizes, and othe jointing material the involves this melting nessesery repals including thredding, streting, turning, machining, finishing etc,. complete with attending all nessesery JOBs including assembling all the parts with errection and trail running etc,.complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code25 - Supplying of spare parts and repair re conditioning, trail running of 10" sizes N.R. valve including dismentaling and fecilete from site work to work shop by removing from delivery end of T joint including supply of spare parts gun metal bushs hingers shop, stainless steel square thredding shaft square thredding shaft gum metal nut guld ring to tongue suitable sizes, paking rubber bolt and nuts with washers of required sizes, and othe jointing material the involves this melting nessesery repals including thredding, streting, turning, machining, finishing etc,. complete with attending all nessesery JOBs including assembling all the parts with erection and trail running etc,. complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code26 - Supplying spare parts to Foot Valve for maintanance to facilitate from site to workshop for Reconditioning of Foot Valve. Tongue pins are replace by making new pins with SS shaft, Tongue Gun metal bushes are replaced by new gun metal bushes with machining for required sizes, providing and fixing of new foot valve leather, providing and fixing of packing rubber, supplying of bolts and nuts, catrol grease for the foot valve, after attending all repairs same has to facilitate from workshop to site and Re erection of Foot valve after attending JOBs including assembling all the parts with erection and trail running etc, complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code27 - Winding of 125 HP DWT 3 phase induction motor Kirloskar/ Jothi/ Croption greaves make motor with 'B' class insulating materials such as triple papers, emperor cloth, cotton rape, varnish (oil) air dry, fiber glass sleeves, legs stripping with 7/16 end connection and suitable for above motor HTP (ISI) make class-1 working with 100 degree C heat gauge enamel coated and insulating copper winding wire required as per original make. Labour charges to lifiting and the above motor including transporation charges from site to workshop and return to site and overolling and trail run at site etc,. complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code28 - Supplying starter spares for 150 Amps air brake ATS starter replacement of suitable contacts on volt coil, timer, pushing timer, pilot lamp, amps meter and volt meter, turnel plate, push botton, MCB, Bassbar plate, a/m plates, 716 flexible copper pvc coated wire 3 If contacter for suitable HP, tripping relay unit, CT relaying, CT coil, HRC fuse function etc,. And complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code29 - Supplying and spare materials suitable providing of L&T make OCB base plate with studs etc,. Complete providing & fixing contacts for OCB and providing of moving copper contacts or providing of JOBvelts copper coils with cour (3 no's) and providing of bakelite buses for study in OCB, providing and fixing of 100 sq.mm copper lugs (cripping) or wonder make RYB steel grip pvc tape and steel tension blade. On volt coil with OCB required oil and labour charges for dismantling and reassembly the OCB unit with new parts, repairing for connecting with load condition and filling complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code30 - FCMA BASED SOFT STATER Supply ererction delivery and commssioning of (FCMA) Flux compensated magnetic amplifler tchnology control panel for smooth starting by toqure control and reduction in starting current etc., The soft starter should have the following componeuts. 1)8.No.Air break 100A Contractor. 2) 1 No. Air break 60A contractor for make and break. 3) 2 No. Resin cast dual core current transformers of sultable ratio burden and class of accuracy conforming to latest IS 2795 with 15 VA burden for protection class 5 P 10.4) 3 No. current transformer with 15 VA burden class for metering. 5) 1 No.0.5 to 0.6 secs pneumatic ON/OFF delay timer for automatic change over to full voltage.6) 1 Set of start/stop Push buttonbs conforming to the latest ISS 6875. 7) 1 Set on/off indicating lamps.8) 1 No.digital type am motor with suitable CT's OF Approprate ratio. 9) 1 No.Digital Voltmeter.10) 1No. Ammeyer selector switch etc., As for water board Specifications.For 300 Amps.complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code31 - Transformer Oil complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code32 - SAE 10 OIL complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code33 - Grease GEM-RR3 complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.