Minor Irrigation Department Tender

MID004 - ALL TYPES OF JACK WELL V-T PUMP DETAILS as per ISI specifiction with guarantee period of not less than 12 months -For Pump dismentaling and refitting after attending repairs. For 60 HP to 120 HP

MID005 - For Top body bush fitting,etc., complete with all Leads and all Lifts and as directed by the Engineer - in - Charge. For 60 HP to 120 HP

MID006 - For Bottom body bush fitting,etc., complete with all Leads and all Lifts and as directed by the Engineer - in - Charge. For 60 HP to 120 HP

MID007 - For Pumps stage body bush fitting Each,etc., complete with all Leads and all Lifts and as directed by the Engineer - in - Charge. For 60 HP to 120 HP

MID008 - For Pump body necking fitting Each etc., complete with all Leads and all Lifts and as directed by the Engineer - in - Charge. For 60 HP to 120 HP

MID009 - For Impeller breezing and making,etc., complete with all Leads and all Lifts and as directed by the Engineer - in - Charge. For 60 HP to 120 HP

MID010 - For Pump shaft press throwble etc., complete with all Leads and all Lifts and as directed by the Engineer - in - Charge. For 60 HP to 120 HP

MID011 - For Connecting bush G.M new making Each,etc., complete with all Leads and all Lifts and as directed by the Engineer - in - Charge. For 60 HP to 120 HP

MID012 - For Oil inside new Fitting & threading Each etc., complete with all Leads and all Lifts and as directed by the Engineer - in - Charge. For 60 HP to 120 HP

MID013 - For Pump open & fitting at work shop etc., complete with all Leads and all Lifts and as directed by the Engineer - in - Charge. For 60 HP to 120 HP

MID014 - For Transportation charges both side etc., complete with all Leads and all Lifts and as directed by the Engineer - in - Charge. For 60 HP to 120 HP

MID015 - Rewinding of monoblock motor with copper insulaton wire suitable gauge as per ISI specification with all necessary materials and labour,tools and equipments with guarantee period of not less than 12 months for 75 HP

MID016 - Unloading of the faulty Transformer tank with active parts and accessories at firm's work or loading of repaired Transformer tank with active parts or accessories at firm's works. For 250 KVA

MID017 - Providing new windings in place of damaged winding including cost of materials, labour, drying etc., (Both HV & LV) - per kg of winding

MID018 - Drying of Transformer at factory : Drying of active parts of transformer in Oven

MID019 - Transformer Oil as per IS-335:1993 EHV Grade Transformer Oil - New with all lead and lifts including loading and unloading as per the direction of the Engineer in-charge of the work.

MID020 - LT Distribution Box for 250 kVA DTC with MCCB's (Sheet Metal)(Dwg No. BESCOM/GM/QS&S/08 Dtd 24.11.2018) FOR 250 KVA

MID021 - Erection and fixing of LT Distribution Box FOR 250 KVA

MID022 - Supply of Grease GEM-RR3 with all lead and lifts including loading and unloading as per the direction of the Engineer in-charge of the work.

MID023 - Engaging Pump driver for running scheme

MID024 - Engaging Watchman for watch and ward of the schemes.

MID025 - Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work.

MID026 - Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. Depth exceeding 1.5m, but not exceeding 3 m

MID027 - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m ; for removing blocked pipe Intake Channel

MID028 - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. Depth exceeding 1.5m, but not exceeding 3 m ; for removing blocked pipe Intake Channel

MID029 - Manufacturing, providing, trasporting, rolling, lowering, laying, jointing & testing and commissioning of MS specials of minimum 8mm thick such as bends, tail pieces, reduces etc. conforming to IS-7322:1985 with latest amendments and including perfect linking and welding of joints to correct position includng cost and conveyance of materials with all lead and lifts, cost all labour and giving satisfactory hydraulic test as per IS:3589:2001 with latest amendments for test pressure and working pressure both at factory and site etc. complete as per detailed specifications with inside lining two coat of food grade epoxy painting of approved make with Each coat of 250 micron thick (after dry) over one coat of food grade epoxy primer of approved make with minium of 50 micron thick (after dry) and outside 25mm thick coating in CM 1:3 by providing 50x50mm weld mesh including loading and unloading of the pipes for the following category to suit PSC / MS / CI / AC / DI / PVC pipes. The weight of MS shell only by considered before lining and coating for arriving at the rate. The thickness of plate will be specified by the engineer. For Pipe bends,branches, tail pieces, reducers etc. for upto 500mm dia pipes for Shivayogi Mandira Tank filling LIS

MID030 - Cutting and removing jauliflora bushes above 1.50 m upto 3.00 m girth excluding removal of stumps and including burning or disposing off the materials as directed with all other ancillary operations as directed and complete as per specification.

MID031 - Removing / refixing the Barrage / dam, gates / vents including Conveying the gates to store yard and stacking all materials seperately and same as to be re inserted as directed including cost of all materials, machinery, labour & all necessary works as directed and complete as per specification.

MID032 - Cleaning gates / hoists / embedded parts for re-painting by removing rust, old paint, grease by using wire brush, scrubber, rust remover including cost of all materials, labour, machinery, scaffolding, applying a coat of rust inhibitive compound with all other ancillary operations as directed and complete as per specification.

MID033 - Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work including preparing the surface after thorougly cleaning oil, grease,dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Enginer-in-charge.

MID034 - Replacing old / damaged 25 x 25 mm sponge rubber seals and bolt / nut / washers of gate and fixing new seals / bolts / nuts / washers including cost of all materials, labour, adhesive, & all necessary works as directed and complete as per specification.