Minor Irrigation Department Tender

Item No 8.24.2, Volume-IV, PAGE No-104 - Excavation and removal of silt and silt mixed with sand from canal bed by manual means including disposing off the same in spoil bank or on the canal embankment in layers as directed with all other ancillary operations complete.in slussy condition Complete with all lead and lifts, loading and unloading as per specification, drawing and direction of engineer in charge of work

Item No 1.14.1, Volume-I, PAGE No-8 - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m. Complete with all lead and lifts, loading and unloading as per specification, drawing and direction of engineer in charge of work Complete with all lead and lifts, loading and unloading as per specification, drawing and direction of engineer in charge of work

Item No 1.12, Volume-I, PAGE No-8 - Providing and constructing dry size stone pitching using 200 to 250 mm size stones with pin headers at 2 per sqm using stones and stone chips from approved source including cost of all materials, labour, hand packing / wedging stone chips into joints, finishing and all other ancillary operations complete.300mm thick

Item No 2.13, Volume-IV, PAGE No-39 - Providing and laying in-situ vibrated M-15 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for plain concrete works including cost of all materials, machinery, labour, cleaning, providing mortar layer for lift joints, batching, mixing, placing in position, levelling, vibrating, finishing, curing with all other ancillary operations complete. Complete with all lead and lifts, loading and unloading as per specification, drawing and direction of engineer in charge of work

Item No 1.12 Volume-IV, PAGE No-130 - Providing and laying insitu vibrated M-20 (28 days cube compressive strength not less than 20 N/sq mm) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, including cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, centering, formwork and scafolding and all other appurtenances required to complete the work as per technical specifications for check dam/pickups/irrigation tanks waste weir/sluice, sluice canal and other allied works like abutments/wing walls/returns/cutoff walls works & all necessary works as directed and complete as per specification. Complete with all lead and lifts, loading and unloading as per specification, drawing and direction of engineer in charge of work

Item No 2.11 e, Volume-I , PAGE No-18 - Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire/soft annealed steel wire and other ancilary operations complete as per drawing and technial specification.e. Dam and Allied works. Complete with all lead and lifts, loading and unloading as per specification, drawing and direction of engineer in charge of work

Item No 2.5.2, Volume-I, PAGE No-16 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Complete with all lead and lifts, loading and unloading as per specification, drawing and direction of engineer in charge of work

Item No 1.2, Volume-I, PAGE No-129 - Providing impervious filling adjacent to masonry / concrete structure and filling trial pits with soil available in adjacent area in layers of 100 to 150 mm and compacting each layer to density control of not less than 95 percent using pneumatic tampers or by vibratory earth rammers including cost of all materials, machinery, labour, picking previous layer, spreading soil in layer, breaking clods, watering & all necessary works as directed and complete as per specification Complete with all lead and lifts, loading and unloading as per specification, drawing and direction of engineer in charge of work

Item No 1.8, Volume-I, PAGE No-7 - Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Complete with all lead and lifts, loading and unloading as per specification, drawing and direction of engineer in charge of work

Item No 3.29.1, Volume-IV, PAGE No-52 - Providing and fixing GI pressure relief pipe with one end closed by perforated GI plate and other end provided with alluminium lid hinged to pipe including cost of all materials, labour, drilling 8 mm dia holes and all other ancillary operations complete. 50 mm diameter and 125 mm long Complete with all lead and lifts, loading and unloading as per specification, drawing and direction of engineer in charge of work