Minor Irrigation Department Tender

Common SR Vol-4 2023-24 P.No.39 I.No-2.13 - Providing and laying in-situ vibrated M-15 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for plain concrete works including cost of all materials, machinery, labour, cleaning, providing mortar layer for lift joints, batching, mixing, placing in position, levelling, vibrating, finishing, curing with all other ancillary operations complete ---- Complete with all leads and lifts as per standard specifications and directions of the Engineer in-charge of the work

Common SR Vol-4 2023-24 P.No.130 I.No-1.12 - Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, including cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, centering, formwork and scafolding and all other appurtenances required to complete the work as per technical specifications for check dam /pickups /irrigation tanks/waste weir/ sluice, sluice canal and other allied works like abutments/wing walls/returns/cutoff walls works & all necessary works as directed and complete as per specification. ---- Complete with all leads and lifts as per standard specifications and directions of the Engineer in-charge of the work

PWD Common SR Vol-1 2023-24 P.No.16 I.No-2.4.3 - Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications- M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates-for---- Complete with all leads and lifts as per standard specifications and directions of the Engineer in-charge of the work

PWD Common SR Vol-1 2023-24 P.No.16 I.No-2.4.3 - Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications- M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. - Complete with all leads and lifts as per standard specifications and directions of the Engineer in-charge of the work

PWD Common SR Vol-1 2023-24 P.No.16 I.No-2.5.2 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications- M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. ---- Complete with all leads and lifts as per standard specifications and directions of the Engineer in-charge of the work

PWD Common SR Vol-1 2023-24 P.No.18 I.No-2.11(b) - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Foundations of Bridges ---- Complete with all leads and lifts as per standard specifications and directions of the Engineer in-charge of the work

PWD Common SR Vol-1 2023-24 P.No.18 I.No-2.11(b) - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Foundations of Bridges Complete with all leads and lifts as per standard specifications and directions of the Engineer in-charge of the work

PWD Common SR Vol-1 2023-24 P.No.18 I.No-2.11(d) - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. - Super structure of Bridges ---- Complete with all leads and lifts as per standard specifications and directions of the Engineer in-charge of the work

Common SR Vol-4 2023-24 P.No.40 I.No-2.18 - Providing and forming expansion joint for spillway bridge consisting of 75 x 75 x 6 mm angles 2 numbers provided with 250 mm long 12 mm dia. anchors fixed to both flanges at 150 mm c / c and 140 x 6 mm plate welded on top of one of the angle including cost of all materials, labour, machinery, providing and fixing 38 mm thick joint filler board matching the thickness of wearing coat, painting and all other ancillary operations complete. ---- Complete with all leads and lifts as per standard specifications and directions of the Engineer in-charge of the work

Common SR Vol-4 2023-24 P.No.41 I.No-2.29 - Providing impervious embankment adjacent to masonry / concrete structure and filling trial pits using impervious approved soil from borrow area in layers of 100 to 150 mm ( before compaction ) including cost of all materials, machinery, labour, all other operations such as collection of soil, picking previous layer, spreading soil in layer of specified thickness, sorting-out, breaking clods, levelling, sectioning edges / sides, watering, compacting to density control of not less than 95 percent using pneumatic tampers / vibrating earth rammers and all other ancillary operations complete. ---- Complete with all leads and lifts as per standard specifications and directions of the Engineer in-charge of the work

Common SR Vol-4 2023-24 P.No.54 I.No-3.44.1 - Providing and constructing dry size stone pitching using 200 to 250 mm size stones with pin headers at 2 per m2 using stones and stone chips from approved source including cost of all materials, labour, hand packing / wedging stone chips into joints, finishing and all other ancillary operations complete- 300 mm thick ---- Complete with all leads and lifts as per standard specifications and directions of the Engineer in-charge of the work

Common SR Vol-4 2023-24 P.No.129 I.No-1.1 - Providing and constructing 75 mm dia PVC pipe weep holes for concrete / masonry walls including providing 200 x 200 x 200 mm size porous concrete block made of cement and 20 mm down coarse aggregate in 1 : 4 proportion including 100 mm thick sand backing at the junction of wall and soil back fill, cost of all materials, machinery, labour & all necessary works as directed and complete as per specification. ---- Complete with all leads and lifts as per standard specifications and directions of the Engineer in-charge of the work