Minor Irrigation Department Tender

code04 - Supplying spare parts to Foot Valve for maintanance to facilitate from site to workshop for Reconditioning of Foot Valve. Tongue pins are replace by making new pins with SS shaft, Tongue Gun metal bushes are replaced by new gun metal bushes with machining for required sizes, providing and fixing of new foot valve leather, providing and fixing of packing rubber, supplying of bolts and nuts, catrol grease for the foot valve, after attending all repairs same has to facilitate from workshop to site and Re erection of Foot valve after attending JOBs including assembling all the parts with erection and trail running etc, complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code05 - Rewinding of monoblock motor with copper insulaton wire suitable gauge as per ISI specification with all necessary materials and labour,tools and equipments with guarantee period of not less than 12 months. 100HP monobloc motor rewinding. complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code06 - Supplying starter spares for 200 Amps air brake ATS starter replacement of suitable contacts on volt coil, timer, pushing timer, pilot lamp, amps meter and volt meter, turnel plate, push botton, MCB, Bassbar plate, a/m plates, 716 flexible copper pvc coated wire 3 If contacter for suitable HP, tripping relay unit, CT relaying, CT coil, HRC fuse function etc,. And complete with all lead and lifts including loading and unloading as per the directions of Engineer-in-charge of work.

code07 - Supplying and spare materials suitable providing of L&T make OCB base plate with studs etc,. Complete providing & fixing contacts for OCB and providing of moving copper contacts or providing of novelts copper coils with cour (3 No's) and providing of bakelite buses for study in OCB, providing and fixing of 100 sq.mm copper lugs (cripping) or wonder make RYB steel grip pvc tape and steel tension blade. On volt coil with OCB required oil and labour charges for dismantling and reassembly the OCB unit with new parts, repairing for connecting with load condition and filling complete job.complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code08 - Transformer Oil complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code09 - Grease GEM-RR3 complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code10 - Cutting and removing jauliflora bushes upto 1.50 m girth excluding removal of stumps and including burning or disposing off the materials as directed with all other ancillary operations complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code11 - Excavation and removal of silt and silt mixed with sand from canal bed by manual means including disposing off the same in spoil bank or on the canal embankment in layers as directed with all other ancillary operations complete.in dry condition complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code12 - De-silting in tank bed/ Feeder Channel/Canal in dry condition by excavating the deposited bed material and disposing off the same by stacking/ formation of Embankment or as directed including cost of all machinery, labour & all necessary works as directed and complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code13 - Hankunti LIS: Erection, testing, commissioning and trial running of centrifugal pump and motor with all accessories necessary for satisfactory running of pump including cost of all materials, machinery, labour & all necessary works complete as per terms and conditions of contract. More than 150 upto 200 hp with all accessories.complete with attending all nessesery JOBs including assembling all the parts with errection and trail running etc,. complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code14 - Supplying of spare parts and repair re conditioning, trail running of 10" sizes sluice valve including dismentaling and fecilete from site work to work shop by removing from delivery end of T joint including supply of spare parts gun metal bushs hingers shop, stainless steel square thredding shaft square thredding shaft gum metal nut guld ring to tongue suitable sizes, paking rubber bolt and nuts with washers of required sizes, and othe jointing material the involves this melting nessesery repals including thredding, streting, turning, machining, finishing etc,. complete with attending all nessesery JOBs including assembling all the parts with errection and trail running etc,. complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code15 - Supplying of spare parts and repair re conditioning, trail running of 10" sizes N.R. valve including dismentaling and fecilete from site work to work shop by removing from delivery end of T joint including supply of spare parts gun metal bushs hingers shop, stainless steel square thredding shaft square thredding shaft gum metal nut guld ring to tongue suitable sizes, paking rubber bolt and nuts with washers of required sizes, and othe jointing material the involves this melting nessesery repals including thredding, streting, turning, machining, finishing etc,. complete with attending all nessesery JOBs including assembling all the parts with erection and trail running etc,.complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code16 - Supplying spare parts to Foot Valve for maintanance to facilitate from site to workshop for Reconditioning of Foot Valve. Tongue pins are replace by making new pins with SS shaft, Tongue Gun metal bushes are replaced by new gun metal bushes with machining for required sizes, providing and fixing of new foot valve leather, providing and fixing of packing rubber, supplying of bolts and nuts, catrol grease for the foot valve, after attending all repairs same has to facilitate from workshop to site and Re erection of Foot valve after attending JOBs including assembling all the parts with erection and trail running etc, complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code17 - Rewinding of monoblock motor with copper insulaton wire suitable gauge as per ISI specification with all necessary materials and labour,tools and equipments with guarantee period of not less than 12 months. 200 HP monobloc motor rewinding. complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code18 - Supplying starter spares for 200 Amps air brake ATS starter replacement of suitable contacts on volt coil, timer, pushing timer, pilot lamp, amps meter and volt meter, turnel plate, push botton, MCB, Bassbar plate, a/m plates, 716 flexible copper pvc coated wire 3 If contacter for suitable HP, tripping relay unit, CT relaying, CT coil, HRC fuse function etc,. And complete with all lead and lifts including loading and unloading as per the directions of Engineer-in-charge of work.

code19 - Supplying and spare materials suitable providing of L&T make OCB base plate with studs etc,. Complete providing & fixing contacts for OCB and providing of moving copper contacts or providing of novelts copper coils with cour (3 No's) and providing of bakelite buses for study in OCB, providing and fixing of 100 sq.mm copper lugs (cripping) or wonder make RYB steel grip pvc tape and steel tension blade. On volt coil with OCB required oil and labour charges for dismantling and reassembly the OCB unit with new parts, repairing for connecting with load condition and filling complete job.complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code20 - Transformer Oil complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code21 - Grease GEM-RR3 complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code22 - Cutting and removing jauliflora bushes upto 1.50 m girth excluding removal of stumps and including burning or disposing off the materials as directed with all other ancillary operations complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code23 - Excavation and removal of silt and silt mixed with sand from canal bed by manual means including disposing off the same in spoil bank or on the canal embankment in layers as directed with all other ancillary operations complete.in dry condition complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code24 - De-silting in tank bed/ Feeder Channel/Canal in dry condition by excavating the deposited bed material and disposing off the same by stacking/ formation of Embankment or as directed including cost of all machinery, labour & all necessary works as directed and complete as per specification.complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code25 - Providing casing embankment using semi-pervious / pervious approved soil from borrow areas in layers of 250 to 300 mm (before compaction ) including cost of all materials, machinery, labour,all other operations such as collection of soil, spreading soil in layer of specified thickness, sorting out, breaking clods, levelling, sectioning edges / sides, watering, compacting each layer to density control of not less than 95 percent or as stipulated using power roller and all other ancillary operations complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code26 - Mattur LIS: Erection, testing, commissioning and trial running of centrifugal pump and motor with all accessories necessary for satisfactory running of pump including cost of all materials, machinery, labour & all necessary works complete as per terms and conditions of contract. More than 75 upto 100 hp with all accessories.complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code27 - Supplying of spare parts and repair re conditioning, trail running of 10" sizes sluice valve including dismentaling and fecilete from site work to work shop by removing from delivery end of T joint including supply of spare parts gun metal bushs hingers shop, stainless steel square thredding shaft square thredding shaft gum metal nut guld ring to tongue suitable sizes, paking rubber bolt and nuts with washers of required sizes, and othe jointing material the involves this melting nessesery repals including thredding, streting, turning, machining, finishing etc,. complete with attending all nessesery JOBs including assembling all the parts with errection and trail running etc,. complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code28 - Supplying of spare parts and repair re conditioning, trail running of 10" sizes N.R. valve including dismentaling and fecilete from site work to work shop by removing from delivery end of T joint including supply of spare parts gun metal bushs hingers shop, stainless steel square thredding shaft square thredding shaft gum metal nut guld ring to tongue suitable sizes, paking rubber bolt and nuts with washers of required sizes, and othe jointing material the involves this melting nessesery repals including thredding, streting, turning, machining, finishing etc,. complete with attending all nessesery JOBs including assembling all the parts with erection and trail running etc,. complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code29 - Supplying spare parts to Foot Valve for maintanance to facilitate from site to workshop for Reconditioning of Foot Valve. Tongue pins are replace by making new pins with SS shaft, Tongue Gun metal bushes are replaced by new gun metal bushes with machining for required sizes, providing and fixing of new foot valve leather, providing and fixing of packing rubber, supplying of bolts and nuts, catrol grease for the foot valve, after attending all repairs same has to facilitate from workshop to site and Re erection of Foot valve after attending JOBs including assembling all the parts with erection and trail running etc, complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code30 - Rewinding of monoblock motor with copper insulaton wire suitable gauge as per ISI specification with all necessary materials and labour,tools and equipments with guarantee period of not less than 12 months. 100HP monobloc motor rewinding. complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code31 - Supplying starter spares for 125 Amps air brake ATS starter replacement of suitable contacts on volt coil, timer, pushing timer, pilot lamp, amps meter and volt meter, turnel plate, push botton, MCB, Bassbar plate, a/m plates, 716 flexible copper pvc coated wire 3 If contacter for suitable HP, tripping relay unit, CT relaying, CT coil, HRC fuse function etc,. And complete with all lead and lifts including loading and unloading as per the directions of Engineer-in-charge of work.

code32 - Supplying and spare materials suitable providing of L&T make OCB base plate with studs etc,. Complete providing & fixing contacts for OCB and providing of moving copper contacts or providing of novelts copper coils with cour (3 No's) and providing of bakelite buses for study in OCB, providing and fixing of 100 sq.mm copper lugs (cripping) or wonder make RYB steel grip pvc tape and steel tension blade. On volt coil with OCB required oil and labour charges for dismantling and reassembly the OCB unit with new parts, repairing for connecting with load condition and filling complete job.complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code33 - Transformer Oil complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code34 - Grease GEM-RR3 complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code35 - Cutting and removing jauliflora bushes upto 1.50 m girth excluding removal of stumps and including burning or disposing off the materials as directed with all other ancillary operations complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code36 - Excavation and removal of silt and silt mixed with sand from canal bed by manual means including disposing off the same in spoil bank or on the canal embankment in layers as directed with all other ancillary operations complete.in dry condition complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code37 - De-silting in tank bed/ Feeder Channel/Canal in dry condition by excavating the deposited bed material and disposing off the same by stacking/ formation of Embankment or as directed including cost of all machinery, labour & all necessary works as directed and complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code38 - Providing casing embankment using semi-pervious / pervious approved soil from borrow areas in layers of 250 to 300 mm (before compaction ) including cost of all materials, machinery, labour,all other operations such as collection of soil, spreading soil in layer of specified thickness, sorting out, breaking clods, levelling, sectioning edges / sides, watering, compacting each layer to density control of not less than 95 percent or as stipulated using power roller and all other ancillary operations complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code39 - Neeralagi LIS: Supplying of spare parts to 85 HP oil lubricated DWT pump to facilitate from the site to workshop by removing motor turbine base, tee joint, column pipes, line shaft and bowl assembly etc., Complete, supplying of spare parts to bowl assembly by providing and fixing of gun metal casted, machining, turning, boring and finishing for required sizes and fixing of suction and discharge case bearing, interstage case bearing, supplying of spare parts to trueness and truing of bowl assembly stainless shaft with S.S welding, turning, maching for orginal dimensions of the shaft, supplying of spare parts to trueness and trueing the impeller including inner finishing for shaft sizes and externally machining to requied sizes, supplying of spare parts to the TT nut with replacing new GM bush, supplying of spare parts to stuffing box by means of boring, turing, and internally left hand thearding for oil tube sizes, supplying of spare to gland rope for TT nut, supplying of spare parts to adopter screw gun metal bearing including cost of new gun metal bush and machining for bowl assembly shaft sizes, supplying of spare parts to line shaft of all sizes including welding and turning for required sizes, supplying of spare parts to oil tubes by cutting both ends of each 5 ft length oil tube including jionting of new MS tubes suitable for oil tubes with internally left hand turning for bearing sizes, supplying of spare parts to oil lubricated gun metal bearings suitable pattern casted internally machining and finishing fot line shaft sizes and externally turning machining and left hand treading as per the sample original bearing supplying of spare parts to bolts and nuts packing rubber gland rope etc,. jointing materials after attending all repairs same as to facilited from work shope to site and re errection of pump after attending JOBs including assembling all the parts with errection and trail running ect,.complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code40 - Supplying of spare parts and repair re conditioning, trail running of 10" sizes sluice valve including dismentaling and fecilete from site work to work shop by removing from delivery end of T joint including supply of spare parts gun metal bushs hingers shop, stainless steel square thredding shaft square thredding shaft gum metal nut guld ring to tongue suitable sizes, paking rubber bolt and nuts with washers of required sizes, and othe jointing material the involves this melting nessesery repals including thredding, streting, turning, machining, finishing etc,. complete with attending all nessesery JOBs including assembling all the parts with errection and trail running etc,.complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code41 - Supplying of spare parts and repair re conditioning, trail running of 10" sizes N.R. valve including dismentaling and fecilete from site work to work shop by removing from delivery end of T joint including supply of spare parts gun metal bushs hingers shop, stainless steel square thredding shaft square thredding shaft gum metal nut guld ring to tongue suitable sizes, paking rubber bolt and nuts with washers of required sizes, and othe jointing material the involves this melting nessesery repals including thredding, streting, turning, machining, finishing etc,. complete with attending all nessesery JOBs including assembling all the parts with erection and trail running etc,. complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code42 - Supplying spare parts to Foot Valve for maintanance to facilitate from site to workshop for Reconditioning of Foot Valve. Tongue pins are replace by making new pins with SS shaft, Tongue Gun metal bushes are replaced by new gun metal bushes with machining for required sizes, providing and fixing of new foot valve leather, providing and fixing of packing rubber, supplying of bolts and nuts, catrol grease for the foot valve, after attending all repairs same has to facilitate from workshop to site and Re erection of Foot valve after attending JOBs including assembling all the parts with erection and trail running etc, complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code43 - Winding of 85 HP DWT 3 phase induction motor Kirloskar/ Jothi/ Croption greaves make motor with 'B' class insulating materials such as triple papers, emperor cloth, cotton rape, varnish (oil) air dry, fiber glass sleeves, legs stripping with 7/16 end connection and suitable for above motor HTP (ISI) make class-1 working with 100 degree C heat gauge enamel coated and insulating copper winding wire required as per original make. Labour charges to lifiting and the above motor including transporation charges from site to workshop and return to site and overolling and trail run at site etc,. complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code44 - Supplying starter spares for 125 Amps air brake ATS starter replacement of suitable contacts on volt coil, timer, pushing timer, pilot lamp, amps meter and volt meter, turnel plate, push botton, MCB, Bassbar plate, a/m plates, 716 flexible copper pvc coated wire 3 If contacter for suitable HP, tripping relay unit, CT relaying, CT coil, HRC fuse function etc,. And complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code45 - Supplying and spare materials suitable providing of L&T make OCB base plate with studs etc,. Complete providing & fixing contacts for OCB and providing of moving copper contacts or providing of novelts copper coils with cour (3 No's) and providing of bakelite buses for study in OCB, providing and fixing of 100 sq.mm copper lugs (cripping) or wonder make RYB steel grip pvc tape and steel tension blade. On volt coil with OCB required oil and labour charges for dismantling and reassembly the OCB unit with new parts, repairing for connecting with load condition and filling complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code46 - Transformer Oil complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code47 - SAE 10 OIL complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code48 - Grease GEM-RR3 complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code49 - Cutting and removing jauliflora bushes upto 1.50 m girth excluding removal of stumps and including burning or disposing off the materials as directed with all other ancillary operations complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code50 - Excavation and removal of silt and silt mixed with sand from canal bed by manual means including disposing off the same in spoil bank or on the canal embankment in layers as directed with all other ancillary operations complete.in dry condition complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code51 - De-silting in tank bed/ Feeder Channel/Canal in dry condition by excavating the deposited bed material and disposing off the same by stacking/ formation of Embankment or as directed including cost of all machinery, labour & all necessary works as directed and complete as per specification.complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code52 - Providing casing embankment using semi-pervious / pervious approved soil from borrow areas in layers of 250 to 300 mm (before compaction ) including cost of all materials, machinery, labour,all other operations such as collection of soil, spreading soil in layer of specified thickness, sorting out, breaking clods, levelling, sectioning edges / sides, watering, compacting each layer to density control of not less than 95 percent or as stipulated using power roller and all other ancillary operations complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code53 - Katarki LIS: Erection, testing, commissioning and trial running of centrifugal pump and motor with all accessories necessary for satisfactory running of pump including cost of all materials, machinery, labour & all necessary works complete as per terms and conditions of contract. More than 75 upto 100 hp with all accessories.complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code54 - Supplying of spare parts and repair re conditioning, trail running of 10" sizes sluice valve including dismentaling and fecilete from site work to work shop by removing from delivery end of T joint including supply of spare parts gun metal bushs hingers shop, stainless steel square thredding shaft square thredding shaft gum metal nut guld ring to tongue suitable sizes, paking rubber bolt and nuts with washers of required sizes, and othe jointing material the involves this melting nessesery repals including thredding, streting, turning, machining, finishing etc,. complete with attending all nessesery JOBs including assembling all the parts with errection and trail running etc,. complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code55 - Supplying of spare parts and repair re conditioning, trail running of 10" sizes N.R. valve including dismentaling and fecilete from site work to work shop by removing from delivery end of T joint including supply of spare parts gun metal bushs hingers shop, stainless steel square thredding shaft square thredding shaft gum metal nut guld ring to tongue suitable sizes, paking rubber bolt and nuts with washers of required sizes, and othe jointing material the involves this melting nessesery repals including thredding, streting, turning, machining, finishing etc,. complete with attending all nessesery JOBs including assembling all the parts with erection and trail running etc,. complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code56 - Supplying spare parts to Foot Valve for maintanance to facilitate from site to workshop for Reconditioning of Foot Valve. Tongue pins are replace by making new pins with SS shaft, Tongue Gun metal bushes are replaced by new gun metal bushes with machining for required sizes, providing and fixing of new foot valve leather, providing and fixing of packing rubber, supplying of bolts and nuts, catrol grease for the foot valve, after attending all repairs same has to facilitate from workshop to site and Re erection of Foot valve after attending JOBs including assembling all the parts with erection and trail running etc, complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code57 - Rewinding of monoblock motor with copper insulaton wire suitable gauge as per ISI specification with all necessary materials and labour,tools and equipments with guarantee period of not less than 12 months. 100HP monobloc motor rewinding. complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code58 - Supplying starter spares for 125 Amps air brake ATS starter replacement of suitable contacts on volt coil, timer, pushing timer, pilot lamp, amps meter and volt meter, turnel plate, push botton, MCB, Bassbar plate, a/m plates, 716 flexible copper pvc coated wire 3 If contacter for suitable HP, tripping relay unit, CT relaying, CT coil, HRC fuse function etc,. And complete with all lead and lifts including loading and unloading as per the directions of Engineer-in-charge of work.

code59 - Supplying and spare materials suitable providing of L&T make OCB base plate with studs etc,. Complete providing & fixing contacts for OCB and providing of moving copper contacts or providing of novelts copper coils with cour (3 No's) and providing of bakelite buses for study in OCB, providing and fixing of 100 sq.mm copper lugs (cripping) or wonder make RYB steel grip pvc tape and steel tension blade. On volt coil with OCB required oil and labour charges for dismantling and reassembly the OCB unit with new parts, repairing for connecting with load condition and filling complete job.complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code60 - Transformer Oil complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code61 - Grease GEM-RR3 complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code62 - Cutting and removing jauliflora bushes upto 1.50 m girth excluding removal of stumps and including burning or disposing off the materials as directed with all other ancillary operations complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code63 - Excavation and removal of silt and silt mixed with sand from canal bed by manual means including disposing off the same in spoil bank or on the canal embankment in layers as directed with all other ancillary operations complete.in dry condition complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code64 - De-silting in tank bed/ Feeder Channel/Canal in dry condition by excavating the deposited bed material and disposing off the same by stacking/ formation of Embankment or as directed including cost of all machinery, labour & all necessary works as directed and complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code65 - Providing casing embankment using semi-pervious / pervious approved soil from borrow areas in layers of 250 to 300 mm (before compaction ) including cost of all materials, machinery, labour,all other operations such as collection of soil, spreading soil in layer of specified thickness, sorting out, breaking clods, levelling, sectioning edges / sides, watering, compacting each layer to density control of not less than 95 percent or as stipulated using power roller and all other ancillary operations complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.