Minor Irrigation Department Tender

Vol 1 Item No.1.14.1 Page 8 - Earth work excavation for Foundation by mechanicalmeans for all works & depth upto 3 m, as per drawingand technical specifications, including settingout, shoring, strutting, barricading, caution lights,including dressing of excavated surfaces, disposing offor levelling the excavated earth or sorting & stackingthe selected earth for reuse in a radius of 50 m andlift upto 1.5 m including Cost of labour, tools, usage ofmachinery & other appurtenaces required to completethe work. In all kinds of soils Depth upto 3 m.with all lead and lifts including loading and unloading as per the direction of the Engineer in-charge of the work.

SR Vol 4 PART ii Item No.1.8 Page 130 - Providing rubble stone/boulder filling between or behind abutment below apron including cost of all materials, labour, hand packing,finishing top surface & all necessary works as directed and complete as per specification.with all lead and lifts including loading and unloading as per the direction of the Engineer in-charge of the work.

SR Vol 1 Item No.2.2.1 Page 15 - Providing and laying in position Cement Concretefor all Foundation works. The granite/trap/basaltcrushed graded coarse aggregates and fine aggregatesas per relevant IS Codes machine mixed with superplasticizers laid in finished layers, well compactedusing needle vibrators, including all lead & lifts, cost ofall materials, quality confirming to the requirements ofrelevant IS codes, labour, Usage charges of machinery,curing and all the other appurtenances required tocomplete the work as per technical specifications M20 Design Mix Using 20 mm and down size graded crushed coarse aggregates.with all lead and lifts including loading and unloading as per the direction of the Engineer in-charge of the work.

Vol 1 Item No.2.3.1 Page 16 - Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery,curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.with all lead and lifts including loading and unloading as per the direction of the Engineer in-charge of the work.

Vol 1 Item No.2.11a Page 18 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification a)Buildings.with all lead and lifts including loading and unloading as per the direction of the Engineer in-charge of the work.

Vol 4 Item No.7.28 Page 98 - Design, manufacturing, supply, errection, trail running, performance test and commissioning of centrifugal pump of approved make conforming to IS:12699 (1989) (Reaffirmed 2009) having specified pump output under specified operating head coupled to HT/LT ,WITH motor of adeuate HP rating operating at suitable KV with flexible coupling, self water lubricated thrust bearings, discharge Tee with flanged end for connecting delivery pipe with all other standard accessories and saftey device& all necessary works complete as per specification. UPTO 3500HP.with all lead and lifts including loading and unloading as per the direction of the Engineer in-charge of the work.

SR Vol 4 Item No.7.5 Page 91 - Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded /submerged arc welded mild steel (Fe-410 grade) manifold pipe system of specified diameter and plate thickness with flanged inlets / outlets at specified locations for connecting pump delivery pipes and rising mains and provided with 1 coat of 40 micron thick zinc rich epoxy primer paint and 3 coats of 100 micron thick each coat coal tar epoxy paint for inner surface and exposed outer surface including cost of all materials, machinery, labour, cutting, bending, welding, finishing, painting, conveying to spot, lowering, aligning,jointing, arranging water for testing,hydraulic testing at fabrication site and after laying and jointing at specified test pressure and all other ancillary operations complete as per specifications and approved drawings. (excluding cost of thrust block for anchoring / encasing manifold pipe ).Diameter of manifold pipe : …….mm Thickness of plate : ……mm.Note: Rate per m of pipe= Rate per tonne x Weight of pipe per Rm Weight of pipe per m for specified diameter and plate thickness= 0.976 x Diameter of pipe in mm x Plate thickness in mm / 30000.with all lead and lifts including loading and unloading as per the direction of the Engineer in-charge of the work.

SR Vol 4 Item No.6.6 Page No 74 - Design, fabrication, supply, erection, testing and commissioning of vertical lift sliding type all interchangeable (except bottom element) stoplog gate elements consisting of skin plate, horizontal and vertical girders, stiffeners, lifting pins, bronze padded slide blocks, guide shoes, rubber seals, clamps with all accessories for spillway including cost of all materials, machinery, labour, cutting, aligning, welding, finishing, cleaning, applying one coat of zinc rich epoxy primer and three coats cold applied coal tar epoxy paint, seal fixing and all other ancillary operations complete as per specifications and approved drawings.with all lead and lifts including loading and unloading as per the direction of the Engineer in-charge of the work.

Vol 3 Item No.8.58 c Page No 80 - Providing and laying Reinforced Cement Concrete pipe light duty NP2 for culverts, roadway utilities& crossingsas per IS 458:2003 in Single row including pointing ends and fixing collars with cement mortar 1:2 including cost of all materials, labour, curing completeas per specifications.600 mm dia.with all lead and lifts including loading and unloading as per the direction of the Engineer in-charge of the work.

Vol 4 Item No.4.13.3 Page No 61 - Laying and jointing NP- 2 class hume pipes in CM 1 : 2 proportion by volume including cost of all materials (excluding pipes and collars), labour, aligning pipes, batching and mixing mortar, packing joints with hemp and mortar, finishing, curing and all other ancillary operations complete 600 dia.with all lead and lifts including loading and unloading as per the direction of the Engineer in-charge of the work.

SR Vol 4 Item No.3.41.2 Page 54 - Providing and constructing dry rubble stone pitching with pin headers at 2 per m2 using stones and stone chips from approved source including cost of all materials, labour, hand packing / wedging stone chips, finishing and all other ancillary operations complete. 300mm thick.with all lead and lifts including loading and unloading as per the direction of the Engineer in-charge of the work.