Ministry Of Road Transport And Highways Tender

Road Marking with Hot applied Thermo plastic compound with Reflectorising glass beeds on Bituminous surface Painting road Surface using approved quality Thermo Plastic material (homogeniously composed of aggregates, pigment, resins and glass reflectorising beeds) confirming to clause -803.4.2.2 applied hot either by screeding or extension process at the rate mentiones area of painted surface using suitable machine capable of controlled preparation and laying with surface applicator of glass beads at 250gms/sqmtr allowing cooling to ambient pavement temparature, that shall produce an adherent pavement marking of marking of minimum specified thickness including barricading for traffic diversion as per IRC :35 cleaning the surface of dirt, dust and other foreign matter, demarcation at site, barricading for traffic diversion, traffic control including cost of all materials, labour, loading, unloading, lead, lift transporting etc., complete. at 22.00 kg per Sqm 10 mm thicknes complete as per relevant Sections of MORT& H Specification (5th Revision) & relevent IRC codes complete and including cost of all materials, labour, hire charges of machinery, lighting, guarding, barricading, loading & unloading, with all lead and lift etc., complete as per the direction of the Engineer In Charge of the work.

Providing and fixing of Reflective Raised Pavement marker (RPM’s) / Cat eyes / Road studs confirming to ASTM D4280 type - H, having reflective panels made of prismatic lens of total internal reflection, the prismatic lens should be electronically fixed (welded) to body made of polycarbonate mould, with a height of 20mm size of 130mm X 105mm and reflecting area of 13 Sq Cm with the slope of retro reflective surface within the limit of 35 + / - 5 degree to the base on either side. The marker shall display an initial minimum luminous intensity of 279 mcd / lux at an entrance angle of zero degree and observation angle of 0.20degree. The corresponding values for 20 degree entrance and 0.2degree observation angle shall be 112 mcd / lux with colour multiplying factor on either cases for white, yellow and red markers being 1.00, 0.60 and 0.25 respectively. The RPM’s should be fixed by using two numbers of polymer shanks using appropriate adhesive as recommended and certified by RPM manufacturer. The raised pavement marker should support a sufficient minimum load of 13635 Kg in accordance with ministry specification. The test certificates of the product and purchase lots certificate issued by the supplier should be produced at the time of billing. The cost is inclusive of all lead lift, transportation, labour, fixing in position firmly, Transportation charges, all taxes cost and conveyance of all materials, labour, hire charges of machinery, etc., complete as per relevant Sections of MORT& H Specification (5th Revision) & relevent IRC codes and as directed by the Engineer In Charge of the work.

Providing and fixing retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67-2012 including letter in fixed over aluminum sheeting, 2 mm or aliminum composite panel 4mm thick fixed firmly to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The item includes earthwork excavation, Cement Concrete M-15 grade, 2 coats of approved colour synthetic enamel painting to the steel surface with black and white paint to poles 30 cm alternate as per clauses, including curing, cost of all materials, labour, loading, unloading, lead, lift, transporting etc., complete reflective warrenty as per IRC:67-2012. supported on a class B GI pipe 80 mm outer dia, ,3.50mtr height (min effective height 1.90mtr)made of high intensity grade micro prismatic type IV sheeting, as per table.6.6. , including cost of all materials, labour, hire charges of machinery, lighting, guarding, barricading, loading & unloading, with all lead and lift etc., complete as per relevant Sections of MORT& H Specification (5th Revision) & relevent IRC codes and as per the direction of the Engineer In Charge of the work. 60cm equilateral triangle

Providing and fixing retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67-2012 including letter in fixed over aluminum sheeting, 2 mm or aliminum composite panel 4mm thick fixed firmly to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The item includes earthwork excavation, Cement Concrete M-15 grade, 2 coats of approved colour synthetic enamel painting to the steel surface with black and white paint to poles 30 cm alternate as per clauses, including curing, cost of all materials, labour, loading, unloading, lead, lift, transporting etc., complete reflective warrenty as per IRC:67-2012. supported on a class B GI pipe 80 mm outer dia, ,3.50mtr height (min effective height 1.90mtr)made of high intensity grade micro prismatic type IV sheeting, as per table.6.6. including cost of all materials, labour, hire charges of machinery, lighting, guarding, barricading, loading & unloading, with all lead and lift etc., complete as per relevant Sections of MORT& H Specification (5th Revision) & relevent IRC codes complete and as per the direction of the Engineer In Charge of the work. 60 cm Circular

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 in layers not exceeding 250mm thick and compacting it by mechanical means after adding water to its OMC, so as to achieve 97% compaction of maximum dry density and finish the surface to the required camber, grade and cross section etc., spreading by Dozer, grading by motor grader, consolidation by vibratory road roller and carriage by tipper complete within all lead, all lifts, loading, unloading, all labour, hire charges of machinery etc., complete.including cost of all materials, labour, hire charges of machinery, lighting, guarding, barricading, loading & unloadingetc., complete s per relevant Sections of MORT& H Specification (5th Revision) & relevent IRC codes complete and as per the direction of the Engineer In Charge of the work.

Providing and constructing of 5 to 15 nos rumble strips covered with Bituminous concrete,15-20 mm high at centre,250 mm wide placed at 1 m center to center at approved locations to control speed, marked with white strips of road marking paint.including cost of all materials, labour, hire charges of machinery, lighting, guarding, barricading, loading & unloading, with all lead and lift etc., complete s per relevant Sections of MORT& H Specification (5th Revision) & relevent IRC codes complete and as per the direction of the Engineer In Charge of the work.