Ministry Of Road Transport And Highways Tender

Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces, including cost of all materials, labour, loading, unloading, lead, lift, transporting etc., complete with all other incidental charges and as per the direction of the Engineer-In-Charge for successful completion of work.

Supplying of Solar Raised Pavement Markers made of polycarbonate molded body with circular shape, solar powered, LED self illumination in active mode, 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode. The marker shall support a load of 20000 kg tested in accordance to ASTM D 4280. The marker should be resistant to dust and water ingress according to IP 65 standards and should withstand tempertures in the range of 0 C to 70 C. Color of lighting could be provided in red or yellow (amber) as per requirement and typicl frequency of blinking is 1 Hz. There should be current losses of less than 20 microamperes at 2.4 V in sleepcharging mode to enhance the life of the marker and a full charge should provide for a minimum autonomy of 50 hours. The height, width and length of the marker shall not be less than 10 mm x 100 mm x 100 mm. Also, the surface diameter of the marker shall not be less than 100 mm respectively. The weight of the marker shall not exceed 0.5 kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive and with all other incidental charges and as per the direction of the Engineer-In-Charge for successful completion of work.

Painting the road surface using approved quality Thermo Plastic material (homogeniously composed of aggregates, pigment, resings and glass reflectorising beeds) confirming to Clause-803.4.2.2 applied hot either by screeding or extension process at the rate of mentioned area painted surface using suitable machine capable of controlled preparation and laying with surface applicator of glass beads at 250gms/sqmtr allowing cooling to ambient pavement temperatutre, that shall produce an adherent pavement marking of minimum specified thickness including barricading for traffic diversion as per IRC:35 cleaning the surface of dirt, dust and other foreign matter, demarcation at site, barricading for traffic diversion, traffic control including cost of all materials, labour, loading, unloading, lead, lift, transporting etc., complete with all other incidental charges and as per the direction of the Engineer-In-Charge for successful completion of work.

Construction of unlined surface drains of average cross sectional area 0.40 sqm in soil to specified lines, grades, levels and dimensions to the requirement of clause 301 and 309. including all lead, lifts, all labour, hire charges of all machineries etc., complete with all other incidental charges and as per the direction of the Engineer-In-Charge for successful completion of work. A) Mechanical means using Hydraulic excavator

Maintenance of earthern shoulders:- Making up loss of material/irregularities on shoulder to the design level by adding fresh approved soil and compacting it with appropriate equipment including all lead, lifts, all labour, hire charges of all machineries etc., complete with all other incidental charges and as per the direction of the Engineer-In-Charge for successful completion of work.

Maintenance of earthern shoulders:- Stripping excess soil from shoulder surface to achieve the approved level and compacting with plate vibrator including cost of all materials, labour, hire charges of machinery, lead, loading, unloading with all other incidental charges etc., complete as per the direction of the Engineer-In-Charge for successful completion of work.

Maintenance of flowering plants in central verge, including cost of all materials, labour, hire charges of machinery, lead, loading, unloading with all other incidental charges etc., complete as per the direction of the Engineer-In-Charge for successful completion of work.

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness including all labour, hire charges of all machineries etc., complete.including cost of all materials, labour, hire charges of machinery, lead, loading, unloading with all other incidental charges etc., complete as per the direction of the Engineer-In-Charge for successful completion of work.-By Mechanical Means In area of light jungle

Providing and fixing Project Display Board of size 1.80 vertical x 1.60 mtrs. Horizontal made of cold rolled coil 16 Guage (1.6mm thickness) sheeting strenghtened by welding to MS angle of size 35x35x5mm iron framework on all sides, extra cross vertical angle fixed using nuts and bolts, base of the board shall be cleaned, applying red oxide and black paint by sprayer on both sides of the board and all MS iron framworks, background of the facing side of the board painted in traffic yellow, project information written in English / Kannada / Hindi, painting letters and numerals in black, fixed on a mild steel angle iron post 75 mm x 75 mm x 6 mm , 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 x 45x 60cm, 60cm below ground level and the board 2.8m from ground level as per approved drawing including cost all materials, labour, hire charges of machenery, lead, lift, loading, unloading, curing backfilling, transporting etc., complete. (excluding cost of lettering) including cost of all labour, usage charges of machinery,lead, lift, loading, unloading, transportation etc.,with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work