Ministry Of Road Transport And Highways Tender

Providing and laying Bituminous Concrete Grading-II with higher capacity batch type hot mix plant using crushed aggregates as per table 500-7 of specified grading premixed with bituminous binder VG-30 grade paving bitumen as per clause 504.3.1 complying with IS-73-2013 of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler @ 2% by weight of agregate, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects including cost of all materials all labour, usage charges of all machinery all lead, lifts, loading, unloading stacking, transporting with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work.. 30 mm compacted thickness. As per Job Mix

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 laid in layers not exceeding 250 mm thick and compacting it by mechanical means after adding water to its OMC, so as to achieve 97% compaction of maximum dry density and finish the surface to the required camber, grade and cross section etc., speading, grading by motor grador, consolidation by roller including cost of all materials, labour, usage charges of machinery, barricading, loading & unloading, lead, lifts,transportation, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work.(New road formation)

Removal of earth from the choked hill side drain and disposing it on the valley side manually, including cost of all materials, labour, loading & unloading, lead, lifts,transportation, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work.

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes, including barricading, traffic diversion as per IRC-35, cleaning the surface of dirt, dust and other foreign matter, demarcation at site, traffic control, including cost of all materials, labour, usage charges of machinery, loading & unloading, lead, lifts,transportation, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work.

Painting on concrete surface, including cost of all materials, labour, usage charges of machinery, loading & unloading, lead, lifts,transportation, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work.

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 cm2 on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation. The cost is inclusive of all lead, lift, transportation, labour, fixing in position firmly, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work. The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer.

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of Class-C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 4mm thick Aluminium composite material sheet including lettering depending on the size of the sign fixed over back support frame of min 25 x 25 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.60mtrs high (min effective height 1.90 mtrs),3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67, including curing, cost of all materials, labour, usage charges of machinery, loading & unloading, lead, lifts,transportation, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work.-90cm Equilateral triangle.

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of Class-C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 4mm thick Aluminium composite material sheet including lettering depending on the size of the sign fixed over back support frame of min 25 x 25 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.60mtrs high (min effective height 1.90 mtrs),3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67, including curing, cost of all materials, labour, usage charges of machinery, loading & unloading, lead, lifts,transportation, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work.- 60cm Circular

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of Class-C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 4mm thick Aluminium composite material sheet including lettering depending on the size of the sign fixed over back support frame of min 25 x 25 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.60mtrs high (min effective height 1.90 mtrs),3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67, including curing, cost of all materials, labour, usage charges of machinery, loading & unloading, lead, lifts,transportation, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work.- 90 cm high octagon

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of Class-C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 4mm thick Aluminium composite material sheet including lettering depending on the size of the sign fixed over back support frame of min 25 x 25 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.60mtrs high (min effective height 1.90 mtrs),3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67, including curing, cost of all materials, labour, usage charges of machinery, loading & unloading, lead, lifts,transportation, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work.- 90 cm x 75 cm rectangular

Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of High Intensity grade sheeting clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminum composite material sheet with overall thickness of 4 mm with area exceeding 0.9 sqm fixed over back support frame of min 40 x 40 x 5 mm MS Angle mounted on two Each. of mild steel circular pipe 65 NB ,3.2 mm thicknness and 4.5 meter total height firmly fixed to the ground by means of properly designed foundation with M 25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing including supplying to site of work , curing concrete work , cost of all materials, labour, usage charges of machinery, loading & unloading, lead, lifts,transportation, with all incidental charges, etc., complete as per specification and as directed by the Engineer in charge of work.

Providing and erecting Project Display Board of size 1.80 vertical x1.60M Horizontal made of Cold Rolled Coil Sheet 16 Guage (1.6mm thickness) sheeting strenghtened by welding to MS angle of size 35x35x5mm iron framework on all sides, extra cross vertical angle fixed using nuts and bolts, base of the board shall be cleaned, applying red oxide and black paint by sprayer on both sides of the board and all MS iron frameworks, background of the facing side of the board painted in traffic yellow, project information written in English/Kannada/Hindi, painting letters and numerals in black, fixed on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Each. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level and the board 2.8M from ground level as per approved drawing (Excluding cost of lettering) including cost of all materials, labour, usage charges of machinery, loading & unloading, lead, lifts,transportation, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work.

Reinforced cement concrete M15 grade Kilometre stone of standard design as per IRC:8, fixing in position including painting and printing letters etc. including cost of all materials, labour, loading & unloading, transportation, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work. 5th Kilometer stone (precast)

Reinforced cement concrete M15 grade Kilometre stone of standard design as per IRC:8, fixing in position including painting and printing letters etc. including cost of all materials, labour, loading & unloading, transportation, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work. Ordinary kilometer stone (precast)

Reinforced cement concrete M15 grade Kilometre stone of standard design as per IRC:8, fixing in position including painting and printing letters etc. including cost of all materials, labour, loading & unloading, transportation, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work.-200 metre stone (precast)

Reinforced cement concrete M15 grade Kilometre stone of standard design as per IRC:8, fixing in position including painting and printing letters etc. including cost of all materials, labour, loading & unloading, transportation, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work.-200 metre stone (precast)