Ministry Of Road Transport And Highways Tender

Earthwork excavation for road way in soil by mechnical means using dozer including cuting and pushing the earth to site of embankment including trimming bottom and side slopes in accordance cross sections, including all labour, load, unload, usage charges of all machineries etc.with all other incidental charges,complete. (cutting & filling).

Construction of Granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 including protection of edges of GSB layer, cost of all materials, labour, usage charges of all machinery, lighting, guarding, barricading, maintenance of diversion road, loading & unloading, all lead and lift etc., with all other incidental charges complete. (Compacted Thickness) A (ii) Grading-II Material (Close graded)

Providing laying, spreading and compacting graded stone aggregates as per Table 400-12 & 400-13, to Wet mix macadam specification inlcuding premixing the Material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density of 98% including protection of edges of WMM layer, cost of all materials, labour, usage charges of all machinery, lighting, guarding, barricading, maintenance of diversion road, loading & unloading, all lead and lift etc., with all other incidental charges complete. (Compacted Thickness) B) By using Grader

Filling Pot-holes and Patch Repairs with Bituminous concrete 40mm. Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 504, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2,. I) Using Grading I Material.

Providing and applying primer coat with SSI bitumen emulsion complying IS 8887 on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per Table 500-3, including cost of all materials, labour, usage charges of all machinery, lead, lift loading and unloading etc., with all other incidental charges complete.

Tack Coat: Providing and applying tack coat with Bitumen Emulsion (RS-1) using pressure distributor at the rate of 0.25 kg per sqm on the prepared Granular Surface cleaned with mechanical broom and dusting by air compressor and spraying including cost of all materials, labour, usage charges of machinery, lead, lift, loading, unloading, etc., with all other incidental charges complete.

Tack Coat: Providing and applying tack coat with Bitumen Emulsion (RS-1) using pressure distributor at the rate of 0.20 kg per sqm on the prepared Bituminous Surface cleaned with mechanical broom and dusting by air compressor and spraying including cost of all materials, labour, usage charges of machinery, lead, lift, loading, unloading, etc., with all other incidental charges complete,

Providing and laying Dense Graded Bituminous Macadam with higher capactiy batch type HMP using crushed aggregates as per table 500-7 of specified graded premixed with bituminous binder VG-30 grade paving bitumen as per cluase 504.3.1 complying with IS.73-2013 of specified grading, premixed with bituminous binder at 4.5 percent by weight of total mix and filler, transporting the hot mix to work site, laying with hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with Smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No.505 complete in all respects including cost of all materials all labour, usage charges of machinery, all lead, lifts, loading, unloading, stacking, transporting etc with all other incidental charges complete, 50-75 mm Compacted thickness

Providing and laying Bituminous Concrete with higher capacity batch type hot mix plant using crushed aggregates as per table 500-7 of specified grading premixed with bituminous binder VG-30 grade Paving Bitumen as per cluase 504.3.1 complying with IS 73-2013 of specified grading, premixed with bituminous binder @ 5.4 percent of mix and filler @ 2% by weight of agregate, transporting the hot mix to work site, laying with a hydrostaic paver finisher with sensor control to the required grade, level and alignment, rolling with Smooth wheeled vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No.507 complete in all respects including cost of all materials, all labour, usage charges of all machinery, all lead, lifts, loading, unloading, stacking, transporting etc., with all other incidental charges. complete, 30-40 mm compacted thickness.

Road marking with hot applied Thermo Plastic compound with reflectorising glass beeds on bituminous surface providing and laying of hot applied thermoplastic compound 2.5mm thick including reflcetorising glass beeds at 250gms/sqmtr area thickness of 2.5mm is exclusive of surface applied glass beeds as per IRC:35 the finished surface to be level, uniform and free from streaks and holes, including barricading traffic diversion as per IRC:35 , cleaning the surface of dirt, dust and other foreign matter, demarcation at site, traffic control cost of all materials, all labour, lead, lift, loading, unloading, transporting etc., with all other incidental charges complete.

Solar Powered Road Marker (Solar Stud) Supplying of Solar Raised Pavement Markers made of polycarbonate molded body with circular shape, solar powered, LED self illumination in active mode, 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode. The marker shall support a load of 20000 kg tested in accordance to ASTM D 4280. The marker should be resistant to dust and water ingress according to IP 65 standards and should withstand temperatures in the range of 0 C to 70 C. Color of lighting could be provided in red or yellow (amber) as per requirement and typical frequency of blinking is 1 Hz. There should be current losses of less than 20 microamperes at 2.4 V in sleepcharging mode to enhance the life of the marker and a full charge should provide for a minimum autonomy of 50 hours. The height, width and length of the marker shall not be less than 10mm x 100mm x 100 mm. Also, the surface diameter of the marker shall not be less than 100 mm respectively. The weight of the marker shall not exceed 0.5 Kilograms. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive and complete as directed by the engineer, including cost of all materials all labour, lead, lifts, loading, unloading transporting etc., with all other incidental charges complete

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of Class-B Type IV retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 4mm thick Aluminium composite material sheet including lettering depending on the size of the sign fixed over back support frame of min 25 x 25 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.60mtrs high (min effective height 1.30m), 3.2 mm thickness firmly fixed to the ground by means of property designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67, as per clauses including curing, cost of all materials all labour, lead, lifts, loading, unloading transporting etc., with all other incidental charges complete A(ii) 90 cm equilateral triangle

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of Class-B Type IV retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 4mm thick Aluminium composite material sheet including lettering depending on the size of the sign fixed over back support frame of min 25 x 25 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.60mtrs high (min effective height 1.30m), 3.2 mm thickness firmly fixed to the ground by means of property designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67, as per clauses including curing, cost of all materials all labour, lead, lifts, loading, unloading transporting etc., with all other incidental charges complete A(viii) 60 cm circular

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of Class-B Type IV retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 4mm thick Aluminium composite material sheet including lettering depending on the size of the sign fixed over back support frame of min 25 x 25 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.60mtrs high (min effective height 1.30m), 3.2 mm thickness firmly fixed to the ground by means of property designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67, as per clauses including curing, cost of all materials all labour, lead, lifts, loading, unloading transporting etc., with all other incidental charges complete A (xi) 50 x 60 cm rectangular chevron

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of Class-B Type IV retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 4mm thick Aluminium composite material sheet including lettering depending on the size of the sign fixed over back support frame of min 25 x 25 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.60mtrs high (min effective height 1.30m), 3.2 mm thickness firmly fixed to the ground by means of property designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67, as per clauses including curing, cost of all materials all labour, lead, lifts, loading, unloading transporting etc., with all other incidental charges complete A(xii) 60cm x 45 cm rectangular

Providing and erecting direction and place identification retro- reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4mm with area not exceeding 0.9 sqm fixed over back support frame of minimum 35x35x3mm angle mounted on a mildsteel circular pipe 65NB, 3.2mm thickness and 3.6m height firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing including curing cost of all material all labour, lead, lift,loading, unloading, transporting etc., with all other incidental charges complete.

Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC-79 and the drawings including cost of all materials, all labour,lead, lift, loading, unloading, transporting etc.,with all other incidental charges complete.

Kilometre Stone Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8, fixing in position including painting and printing letters etc., including cost of all materials all labour, lead, lifts, loading, usage charges of machinery, unloading transporting etc., with all other incidental chargescomplete. 5th Kilometer stone

Kilometre Stone Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8, fixing in position including painting and printing letters etc., including cost of all materials all labour, lead, lifts, loading, usage charges of machinery, unloading transporting etc., with all other incidental chargescomplete. Ordinary Kilometer Stone(precast)

Kilometre Stone Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8, fixing in position including painting and printing letters etc., including cost of all materials all labour, lead, lifts, loading, usage charges of machinery, unloading transporting etc., with all other incidental chargescomplete. 200 metre stone(precast)

Providing and erecting Project Display Board of size 1.80 vertical x 1.60 M Horizontal made of Cold Rolled Coil Sheet 16 Gauge(1.6mm thickness) sheeting strengthened by welding to MS angle of size 35x35x5mm iron frame work on all sides, extra cross vertical angle fixed using nuts and bolts, base of the board shall be cleaned, applying red oxide and black paint by sprayer on both sides of the board and all MS iron frameworks, background of the facing side of the board painted in traffic yellow, project information written in English/Kannada/Hindi, painting letters and numerals in black, fixed on a mild steel angle iron post 75mm x 75mm x 6mm, 2Nos. Firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level and the board 2.8M from ground level as per approved drawing, including cost of all material all labour, ead, lift,loading, unloading, ltransporting etc., with all other incidental charges.complete.