Ministry Of Road Transport And Highways Tender

Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces, including cost of all materials, labour, loading, unloading, lead, lift, transporting etc., complete with all other incidental charges and as per the direction of the Engineer-In-Charge for successful completion of work.

Supplying of Solar Raised Pavement Markers made of polycarbonate molded body with circular shape, solar powered, LED self illumination in active mode, 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode. The marker shall support a load of 20000 kg tested in accordance to ASTM D 4280. The marker should be resistant to dust and water ingress according to IP 65 standards and should withstand tempertures in the range of 0 C to 70 C. Color of lighting could be provided in red or yellow (amber) as per requirement and typicl frequency of blinking is 1 Hz. There should be current losses of less than 20 microamperes at 2.4 V in sleepcharging mode to enhance the life of the marker and a full charge should provide for a minimum autonomy of 50 hours. The height, width and length of the marker shall not be less than 10 mm x 100 mm x 100 mm. Also, the surface diameter of the marker shall not be less than 100 mm respectively. The weight of the marker shall not exceed 0.5 kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive and with all other incidental charges and as per the direction of the Engineer-In-Charge for successful completion of work.

Painting the road surface using approved quality Thermo Plastic material (homogeniously composed of aggregates, pigment, resings and glass reflectorising beeds) confirming to Clause-803.4.2.2 applied hot either by screeding or extension process at the rate of mentioned area painted surface using suitable machine capable of controlled preparation and laying with surface applicator of glass beads at 250gms/sqmtr allowing cooling to ambient pavement temperatutre, that shall produce an adherent pavement marking of minimum specified thickness including barricading for traffic diversion as per IRC:35 cleaning the surface of dirt, dust and other foreign matter, demarcation at site, barricading for traffic diversion, traffic control including cost of all materials, labour, loading, unloading, lead, lift, transporting etc., complete with all other incidental charges and as per the direction of the Engineer-In-Charge for successful completion of work.

Construction of unlined surface drains of average cross sectional area 0.40 sqm in soil to specified lines, grades, levels and dimensions to the requirement of clause 301 and 309. including all lead, lifts, all labour, hire charges of all machineries etc., complete with all other incidental charges and as per the direction of the Engineer-In-Charge for successful completion of work. A) Mechanical means using Hydraulic excavator

Maintenance of earthern shoulders:- Making up loss of material/irregularities on shoulder to the design level by adding fresh approved soil and compacting it with appropriate equipment including all lead, lifts, all labour, hire charges of all machineries etc., complete with all other incidental charges and as per the direction of the Engineer-In-Charge for successful completion of work.

Maintenance of earthern shoulders:- Stripping excess soil from shoulder surface to achieve the approved level and compacting with plate vibrator including cost of all materials, labour, hire charges of machinery, lead, loading, unloading with all other incidental charges etc., complete as per the direction of the Engineer-In-Charge for successful completion of work.

Maintenance of flowering plants in central verge, including cost of all materials, labour, hire charges of machinery, lead, loading, unloading with all other incidental charges etc., complete as per the direction of the Engineer-In-Charge for successful completion of work.

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness including all labour, hire charges of all machineries etc., complete.including cost of all materials, labour, hire charges of machinery, lead, loading, unloading with all other incidental charges etc., complete as per the direction of the Engineer-In-Charge for successful completion of work.-By Mechanical Means In area of light jungle

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material, including all labour, usage charges of machinery, lead, lifts, loading, unloading transporting etc., complete with all other incidental charges etc., complete as per the direction of the Engineer-In-Charge for successful completion of work Ordinary soil - Mechanical Means (Depth upto 3 m)

Providing & laying Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregates 40mm nominal size mechanically mixed, placed in foundation and compated by vibration including curing,including cost of all materials all labour, usage charges of machinery, lead, lifts, loading, unloading transporting etc., complete. with all other incidental charges etc., complete as per the direction of the Engineer-In-Charge for successful completion of work.

Providing & laying Plain/Reinforced Cement Concrete in open foundation complete as per drawing & tecnical pecification for Pipe Culvert complete as per Drawing and Technical Specifications, including cost of all materials, formwork, centering, vibrating, compacting,all labour, usage charges of machinery, lead, lifts, loading, unloading transporting, stacking, curing, finishing the exposed faces etc., complete. including cost of all materials all labour, usage charges of machinery, lead, lifts, loading, unloading transporting etc., complete. with all other incidental charges etc., complete as per the direction of the Engineer-In-Charge for successful completion of work.-RCC Grade M20 using batching plant transit mixer & manual placing

Providing & laying Plain/Reinforced Cement Concrete in open foundation complete as per drawing & tecnical pecification for Pipe Culvert complete as per Drawing and Technical Specifications, including cost of all materials, formwork, centering, vibrating, compacting,all labour, usage charges of machinery, lead, lifts, loading, unloading transporting, stacking, curing, finishing the exposed faces etc., complete with all other incidental charges etc., complete as per the direction of the Engineer-In-Charge for successful completion of work (excluding cost of steel and fabrication charges) RCC Grade M 25 using batching plant, transit mixer & manual placing

Supplying, Fitting and Placing un-coated TMT Fe-500 grade bar Reinforcement in Foundation complete as per Drawing and Technical Specifications. including straightening bar, cutting, bending, hooking binding with approved quality binding wire, after placing in position, tying, lapping and/or welding whereever required incluidng cost of all materials, fabrication charges, all labour, material, usage charges of machinery, lead, lifts, loading, unloading, stacking, transporting etc., complete with all other incidental charges etc., complete as per the direction of the Engineer-In-Charge for successful completion of work.

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia PVC pipe, 110 mm dia at 4 kg/sqcm fixing with glue extending through the full width of the structure with slope of 1V :20H towards drawing foce, including cost of all materials curing all labour, material, usage charges of machinery, lead, lifts, loading, unloading, transporting, etc with all other incidental charges etc., complete as per the direction of the Engineer-In-Charge for successful completion of work.

Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS -with all other incidental charges etc., complete as per the direction of the Engineer-In-Charge for successful completion of work. Pipes 200mm dia

Construction of Wet Mix Macadum by providing laying, spreading and compacting of graded stone aggregates as per Table 400-11, mixing in a Wet mix plant of 75 tonne capacity at OMC, carriage of mixed material to work site in tipper to paver, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment, compacting with vibratory roller 8-10 tonne to achieve the desired density of 98% including protection of edges of WMM layer, cost of all materials, labour, hire charges of machinery, lighting, guarding, barricading, maintenance of diversion road, loading & unloading, transporting etc., complete with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work-Using Motor Grader.

Providing and laying heavy duty cobble stones 75mm thick interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum compressive strength of 281 kg per m2 over 50mm thick sand bed ( average thickness ) and compacting with plate vibrator having 3 tons compaction force thereby forcing part of sand underneath to come up in between joints, final compaction of paver surface joints into its final level, including cost of materials, labour and Usage charges of machinery complete as per specifications with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials,labour, curing, polishing complete as per specifications with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 - 2001 made of high intensity grade micro prismatic HIP type XI sheeting, fixed over aluminium sheeting, 2 mm thick supported on Class B GI pipe 3.50m long of 80 mm outer dia, firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.The item includes earthwork excavation, Cement Concrete M-15 grade, 2 coats of approved colour synthetic enamel painting to the steel surface, as per clauses, including curing, cost of all materials, labour, loading, unloading, lead, lift, transporting etc., with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

90 cm equilateral triangle

60 cm equilateral triangle

Providing and fixing Project Display Board of size 1.80 vertical x 1.60 mtrs. Horizontal made of cold rolled coil 16 Guage (1.6mm thickness) sheeting strenghtened by welding to MS angle of size 35x35x5mm iron framework on all sides, extra cross vertical angle fixed using nuts and bolts, base of the board shall be cleaned, applying red oxide and black paint by sprayer on both sides of the board and all MS iron framworks, background of the facing side of the board painted in traffic yellow, project information written in English / Kannada / Hindi, painting letters and numerals in black, fixed on a mild steel angle iron post 75 mm x 75 mm x 6 mm , 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 x 45x 60cm, 60cm below ground level and the board 2.8m from ground level as per approved drawing including cost all materials, labour, hire charges of machenery, lead, lift, loading, unloading, curing backfilling, transporting etc., complete. (excluding cost of lettering) including cost of all labour, usage charges of machinery,lead, lift, loading, unloading, transportation etc.,with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work