Ministry Of Road Transport And Highways Tender

Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 including protection of edges of GSB layer, including cost of all materials, labour, usage charges of all machinery, lighting, guarding, barricading, maintenance of diversion road, loading & unloading with all lead, lifts mixed material (Compacted thickness) and all other incidental charges complete of etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work-Grading-III Material (Coarse graded)

Providing, laying, spreading and compacting graded stone aggregate as per table 400-12 & 400-13, to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density of 98% including protection of edges of WMM layer, cost of all materials, labour, usage charges of all machinery, lighting, guarding, barricading, maintenance of diversion road, loading & unloading with all lead, lifts (Compacted thickness) and all other incidental charges complete of etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work-B. Laying using Grader

Providing and applying primer coat with SS1 bitumen emulsion complying IS-8887 on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means.as per table-500-3, including cost of all materials, labour,usage charges of all machineries, loading & unloading, lead,lifts,transportation, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work.

Providing and applying tack coat with bitumen emulsion(RS1) using emulsion pressure distributor at the rate of 0.25 kg per sqm on the prepared granular surface cleaned with mechanical broom & dusting by air compressor and spraying including cost of all materials, labour,usage charges of all machineries, loading & unloading, lead,lifts,transportation, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work. Tack Coat on Granular Surface (WMM)

Providing and applying tack coat with bitumen emulsion(RS1) using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom & dusting by air compressor and spraying including cost of all materials, labour,usage charges of all machineries, loading & unloading, lead,lifts,transportation, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work. Tack Coat on Bitminus Surface (Existing)

Providing and laying Dense Graded Bituminous Macadam Grading-II with higher capacity batch type HMP using crushed aggregates as per table 500-7 of specified grading premixed with bituminous binder VG-30 grade paving bitumen as per clause 504.3.1 complying with IS-73-2013 of specified grading, premixed with bituminous binder at 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects including cost of all materials all labour, usage charges of all machinery all lead, lifts, loading, unloading, stacking, transporting with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work.. 50-75 mm compacted thickness. As per Job mix NOTE :- Protection of DGBM layer is as per Clause 504.5 of MORTH Specification for roads and bridges , 5th revision .

Providing and laying Bituminous Concrete Grading-II with higher capacity batch type hot mix plant using crushed aggregates as per table 500-7 of specified grading premixed with bituminous binder VG-30 grade paving bitumen as per clause 504.3.1 complying with IS-73-2013 of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler @ 2% by weight of agregate, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects including cost of all materials all labour, usage charges of all machinery all lead, lifts, loading, unloading stacking, transporting with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work.. 30-40 mm compacted thickness. As per Job Mix

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 laid in layers not exceeding 250mm thick and compacting it by mechanical means after adding water to its OMC, so as to acheive 97% compaction of maximum dry density and finish the surface to the required camber, grade and cross section etc., spreading, grading motor grador, consolidation by roller including cost of all materials, labour,usage charges of all machineries, loading & unloading, lead,lifts,transportation, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work. (New road formation)

Construction of unlined surface drains of average cross sectional area 0.40 sqm in soil to specified lines, grades, levels and dimensions to the requirement of clause 301 and 309. Excavated material to be used in embankment including cost of all materials, labour,usage charges of all machineries, loading & unloading, lead,lifts,transportation, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work. A.Mechanical means

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of Class-B Type IV retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 4mm thick Aluminium composite material sheet including lettering depending on the size of the sign fixed over back support frame of min 25 x 25 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.60mtrs high (min effective height 1.30 mtrs), 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67, as per clauses including curing, cost of all materials, labour, usage charges of machinery, loading & unloading, lead, lifts,transportation, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work.- 90cm Equlilateral Triangle

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of Class-B Type IV retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 4mm thick Aluminium composite material sheet including lettering depending on the size of the sign fixed over back support frame of min 25 x 25 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.60mtrs high (min effective height 1.30 mtrs), 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67, as per clauses including curing, cost of all materials, labour, usage charges of machinery, loading & unloading, lead, lifts,transportation, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work.- 60 cm Circular

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of Class-B Type IV retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 4mm thick Aluminium composite material sheet including lettering depending on the size of the sign fixed over back support frame of min 25 x 25 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.60mtrs high (min effective height 1.30 mtrs), 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67, as per clauses including curing, cost of all materials, labour, loading & unloading, lead, lifts,transportation, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work.- 60cmx45cv cm Circular

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes, including, barricading, traffic diversion as per IRC-35, cleaning the surface of dirt, dust and other foriegn matter, demarcation at site, traffic control,cost of all materials, labour, usage charges of machinery, loading & unloading, lead, lifts,transportation, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work.

Providing and erecting Project Display Board of size 1.80 vertical x1.60M Horizontal made of Cold Rolled Coil Sheet 16 Guage (1.6mm thickness) sheeting strenghtened by welding to MS angle of size 35x35x5mm iron framework on all sides, extra cross vertical angle fixed using nuts and bolts, base of the board shall be cleaned, applying red oxide and black paint by sprayer on both sides of the board and all MS iron frameworks, background of the facing side of the board painted in traffic yellow, project information written in English/Kannada/Hindi, painting letters and numerals in black, fixed on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level and the board 2.8M from ground level as per approved drawing (Excluding cost of lettering) including cost of all materials, labour, loading & unloading, lead, lifts,transportation, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work.

Supplying of Solar Raised Pavement Markers made of polycarbonate molded body with circular shape, solar powered,LED self illumination in active mode, 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode. The marker shall support a load of 20000 kg tested in accordance to ASTM D 4280. The marker should be resistant to dust and water ingress according to IP 65 standards and should withstand temperatures in the range of 0 C to 70 C. Color of lighting could be provided in red or yellow (amber) as per requirement and typical frequency of blinking is 1 Hz. There should be current losses of less than 20 microamperes at 2.4 V in sleepcharging mode to enhance the life of the marker and a full charge should provide for a minimum autonomy of 50 hours. The height, width and length of the marker shall not be less than 10 mm x 100 mm x 100 mm. Also, the surface diameter of the marker shall not be less than 100 mm respectively. The weight of the marker shall not exceed 0.5 Kilograms. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive and complete including cost of all materials, labour, loading & unloading, lead, lifts,transportation, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work.

Providing and erecting direction and place identification retro-reflectorised sign (upto 0.90 Sqm size board)as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminum composite material sheet with overall thickness of 4mm with area not exceeding 0.9 sqm fixed over back support frame of min 35 x 35 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.20 mm thick, 3.60mtrs hieght, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing, including curing, cost of all materials, labour, loading & unloading, lead, lifts,transportation, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work.-

Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC-79 and the drawings, including cost of all materials, labour, loading & unloading, lead, lifts,transportation, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work.

Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to confirm to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 811, including cost of all materials, labour, loading & unloading, transportation, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work. Type - A, "W" : Metal Beam Crash Barrier

Painting two coats on new concrete surfaces. Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces as per specification and as directed by the Engineer in charge of work including cost of all materials, labour, usage charges of of all machienries, loading & unloading, lead, lifts, transportation, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work.