Ministry Of Road Transport And Highways Tender

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 laid in layers not exceeding 250 mm thick and compacting it by mechanical means after adding water to its OMC, so as to achieve 97% compaction of maximum dry density and finish the surface to the required camber, grade and cross section etc., speading, grading by motor grador, consolidation by roller including all lead, lifts, loading, unloading, all labour, usage charges of machinery etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges. (New road formation),

Malpe - Molaklmur road

Tadasa, Donabagatta road Via Navilebasavapura, Amaravati camp, Hatikatte

Scarifying Existing Granular Surface to a depth of 50mm by manual means Scarifying the existing granular road surface to a depth of 50 mm and disposal of scarified materials within all lifts and leads upto 1000 meters, including all labour, load, unload,, usage charges of all machinery, etc.., complete and as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges.

Tadasa, Donabagatta road Via Navilebasavapura, Amaravati camp, Hatikatte

Providing and applying tack coat with VG-10 grade bitumen using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom, & dusting by air compressor and spraying including cost of all materials, labour, usage charges of all machinery, loading & unloading etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges.

Malpe - Molaklmur road

Tadasa, Donabagatta road Via Navilebasavapura, Amaravati camp, Hatikatte

Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates as per table 500-7 of specified grading premixed with bituminous binder VG-30 paving bitumen as per clause 504.3.1 complying with IS-73-2013 of specified grading, premixed with bituminous binder at 5.4 per cent of mix and filler at 2% by weight of agregate, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects including cost of all materials all labour, usage charges of all machinery all lead, lifts, loading, unloading stacking transporting etc., complete, 30 mm compacted thickness..BC Grade II. and as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges.

Malpe - Molaklmur road

Tadasa, Donabagatta road Via Navilebasavapura, Amaravati camp, Hatikatte

Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates as per table 500-7 of specified grading premixed with bituminous binder VG-30 paving bitumen as per clause 504.3.1 complying with IS-73-2013 of specified grading, premixed with bituminous binder at 4.5 percent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects including cost of all materials all labour, usage charges of all machinery all lead, lifts, loading, unloading stacking transporting etc., complete, 50mm compacted thickness and as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges.

Tadasa, Donabagatta road Via Navilebasavapura, Amaravati camp, Hatikatte

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes, including, barricading, traffic diversion as per IRC-35, cleaning the surface of dirt, dust and other foriegn matter, demarcation at site, traffuc control,cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges.

Malpe - Molaklmur road

Tadasa, Donabagatta road Via Navilebasavapura, Amaravati camp, Hatikatte

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 cm2 on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer and as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges.

Malpe - Molaklmur road

Tadasa, Donabagatta road Via Navilebasavapura, Amaravati camp, Hatikatte

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of Class-C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 4mm thick Aluminium composite material sheet including lettering depending on the size of the sign fixed over back support frame of min 25 x 25 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.60mtrs high (min effective height 1.90 mtrs),3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67, including curing, cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete. 60cm equilateral triangle and as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges.

Malpe - Molaklmur road

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of Class-C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 4mm thick Aluminium composite material sheet including lettering depending on the size of the sign fixed over back support frame of min 25 x 25 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.60mtrs high (min effective height 1.90 mtrs),3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67, including curing, cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete. 90 cm equilateral triangle and as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges.

Malpe - Molaklmur road

Tadasa, Donabagatta road Via Navilebasavapura, Amaravati camp, Hatikatte

Direction and Place Identification signs with size more than 0.9 sqm size Board. Providing and erecting direction and place identification retro – reflectorized sign as per IRC :67 made of High intensity grade sheeting lause 801.3, fixed over aluminum sheeting, 2mm thick or Aluminum composite material sheet with overall thickness of 4mm with area exceeding 0.9 sqm fixed over back support frame of min 40 x 40 x 5mm MS Angle mounted on two nos of mild steel circular pipe 65 NB, 3.2 mm thickness and 4.5 meter total height firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm X 45 cm X 60 cm, 60 cm below ground level as per approved drawing, finishing neatly, including supplying to site of work, curing concrete work, cost of all materials all labour, lead, lifts, loading, unloading, transporting etc.,, complete and as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges.

Malpe - Molaklmur road

Tadasa, Donabagatta road Via Navilebasavapura, Amaravati camp, Hatikatte

Providing and erecting Project Display Board of size 1.80 verticalx1.60M Horizontal made of Cold Rolled Coil Sheet 16 Guage (1.6mm thickness) sheeting sthrenghtened by welding to MS angle of size 35x35x5mm iron framework on all sides, extra cross vertical angle fixed using nuts and bolts, base of the board shall be cleaned, applying red oxide and black paint by sprayer on both sides of the board and all MS iron frameworks, background of the facing side of the board painted in traffic yellow, project information written in English/Kannada/Hindi, painting letters and numerals in black, fixed on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level and the board 2.8M from ground level as per approved drawing (Excluding cost of lettering)including cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges.

Malpe - Molaklmur road

Tadasa, Donabagatta road Via Navilebasavapura, Amaravati camp, Hatikatte

Granular Sub-Base with Close/Coarse Graded Material (Table :400-1) Plant mix method Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 including protection of edges of GSB layer, cost of all materials, labour, usage charges of all machinery, lighting, guarding, barricading, maintenance of diversion road, loading & unloading all lead, lifts etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges.Grading III Material (Coarse graded)

Tadasa, Donabagatta road Via Navilebasavapura, Amaravati camp, Hatikatte

Wet Mix Macadam (Plant Mix Method) Providing, laying, spreading and compacting graded stone aggregate as per table 400-12 & 400-13, to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density of 98% including protection of edges of WMM layer, cost of all materials, labour, usage charges of all machinery, lighting, guarding, barricading, maintenance of diversion road, loading & unloading all lead, lifts etc., complete (Compacted thickness). laying using Grader. and as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges.

Tadasa, Donabagatta road Via Navilebasavapura, Amaravati camp, Hatikatte

Providing and applying primer coat with SS1 bitumen emulsion complying IS-8887 on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means.as per table-500-3, including cost of all materials, labour, usage charges of all machinery, lead, lift, loading & unloading etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges.

Tadasa, Donabagatta road Via Navilebasavapura, Amaravati camp, Hatikatte

Painting Two Coats on New Concrete Surfaces Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces including cost of all materials all labour, lead, lifts loading unloading transporting and as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges.

Tadasa, Donabagatta road Via Navilebasavapura, Amaravati camp, Hatikatte

Surface Drains in soil (New) Construction of unlined surface drains of average cross sectional area 0.40 sqm in soil to specified lines, grades, levels and dimensions to the requirement of clause 301 and 309. Excavated material to be used in embankment within a lead of 1000 meters including all labour load, unload usage charges of all machinery etc., complete., Mechanical means and as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges.

Tadasa, Donabagatta road Via Navilebasavapura, Amaravati camp, Hatikatte