Military Engineer Services Tender
... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Maintenance Of Internal And External Surface Finishes Of Map Buildings And Nchc Using Smart Technology At Naval Base Karwar in Uttara Kannada, Karnataka, with an estimated contract value of Rs. 70,00,000. The bid opening date for this tender is 16-11-2026 and the last date for bid submission is 14-12-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Military Engineer Services - MES Tender - Karnataka Tender
Opening Date16 Nov 2026
Closing Date14 Dec 2026
Tender Amount₹ 70,00,000
Costs
EMD
₹ 1,30,000Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Maintenance Of Internal And External Surface Finishes Of Map Buildings And Nchc Using Smart Technology At Naval Base Karwar
Contact
Tender Id
2026_MES_798198_1Tender No
8597/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
https://defproc.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
M&L for single component polymer modified repair mortar (compressive strength min 38 MPa at 28 days as per ASTM C109:99 and tensile strength min 2.5 MPa as per ASTM C307) applied up to 15 mm thickness in single coat @ 34 kg per sqm (for 15 mm thickness), as per manufacturer’s instructions and as directed.
300
3
-
... More
M&L for preparation of old painted wooden surfaces of any description, over 10 cm width or girth, and applying one coat synthetic enamel paint using airless spray technology (max working pressure 3300 PSI) capable of operating single spray gun with max material hose length 30 m, spray machine of reputed manufacturer, complete all as specified and directed by Engr-In-Charge.
705.6
4
-
... More
M&L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth, and applying one coat synthetic enamel paint using airless spray technology (max working pressure 3300 PSI) including necessary scaffolding and safety measures as required etc., complete all as specified and directed by Engr-In-Charge.
380.16
5
-
... More
M&L for obliterating old writing of any description, rewriting/repainting to new/ existing writing letters/figures not exceeding 30 cm height in block Roman/Italic/Indian letters, including stops, commas, arrows, brackets, dashes, etc., on sign boards (black or yellow base), and applying two coats of oil paint over suitable priming/base coat, complete all as specified and directed.
15
6
-
... More
M&L for removing/ cutting trees, vegetation, digging out roots from concrete or brick wall, filling holes on building (block of 4/6 Qtrs) wall/ roof/ chajja/ water tank staging area etc and making good with cement mortar 1:4 complete all as specified and directed.
330
7
-
... More
Note for Item Nos. 1 to 8:-
(a) The work pertaining to “smart periodical services” shall be executed only through an authorised applicator of the manufacturer whose materials (i.e. paint/distemper/primer/cement base paint/putty etc.) are proposed to be used by the Contractor and approved by the Garrison Engineer.
(b) The Contractor shall upload, along with the documents under Cover–1, the Memorandum of Understanding (MoU) with only one manufacturer as mentioned in the contract; failing which, the bid shall be liable to be rejected.
-
-
-
... More
Note: All Smart Periodical works under this contract shall be executed only by mechanical means. Manual application shall not be permitted except where specifically approved by the Engineer-in-Charge for inaccessible/small touch-up areas.
-
-
-

