Military Engineer Services Tender
... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Strengthening Of Compound Wall At Frontside Of Sncos Mess Airmen Mess And Connected Works At Mysore Under Age (i) Af Chimney Hills in Mysuru, Karnataka, with an estimated contract value of Rs. 4,61,088. The bid opening date for this tender is 06-11-2026 and the last date for bid submission is 27-11-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Military Engineer Services - MES Tender - Karnataka Tender
Opening Date6 Nov 2026
Closing Date27 Nov 2026
Tender Amount₹ 4,61,088
Costs
EMD
₹ 9,300Document Cost
₹ 500Tender Fee
Refer Documents
Summary
Strengthening Of Compound Wall At Frontside Of Sncos Mess Airmen Mess And Connected Works At Mysore Under Age (i) Af Chimney Hills
Description
Strengthening Of Compound Wall At Frontside Of Snco Mess Airmen Mess And Connected Works At Mysore Under Age (i) Af Chimney Hills
Contact
Tender Id
2026_MES_797608_1Tender No
9006/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
M&L for preparation of new plastered surfaces and applying two coats of 100% Premium acrylic emulsion exteriar weather coat paint smooth having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade will be carried out in camouflage pattern (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm all as specified and directed by Engineer-in-Charge.
350
53
-
... More
Providing precast cement concrete Type B0 1:2:4 in CM 1:6 louvres and jallies, 25mm thick (measured solid), including all mouldings all as specified and as dierected
60
10
-
... More
M&L Providing, cement concrete Type B1 1:2:4 (20mm graded aggregates) as in coping and the like including weathering, slightly rounded or chamfered angles and throating, as directed
2
11
-
... More
M&L mild steel TMT bars 6mm to 8mm dia, , Fe500/Fe500D grade confirming to IS-1786, cut to length cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in stirrups, spacer & binders complete all as specified and directed by Engr -in -Charge
100
10
-
... More
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and as directed.
47.56
22
-
... More
S&F Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc all as specified and as directed.
250
-
-

