Military Engineer Services Tender
... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Repair / Maintenance Of Sewage Treat Plant, Swimming Pool And Connected Works Of Water Supply Installation And Repair / Replacement To Security Lights / Street Lights / Area Lights / Gate Lights, High Mast And Controlling Panels Including Connecting in Bengaluru Urban, Karnataka, with an estimated contract value of Rs. 42,57,000. The bid opening date for this tender is 16-05-2025 and the last date for bid submission is 06-06-2025. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Military Engineer Services - MES Tender
Electrical and Electronics
Electrical Works
Eprocure
Opening Date16 May 2025
Closing Soon6 Jun 2025
Tender Amount₹ 42,57,000
Costs
EMD
₹ 85,140Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_708573_1Tender No
8350/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supply and fix high energy efficient constant current electronic driver suitable for LED street light fitting 35 Watts, LED luminaires 240 Volt, 50Hz, AC single phase complete all as specified and as directed by Engr-in-charge.
70
100
7000
... More
Supply and fix high energy efficient constant current electronic driver suitable for LED street light fitting 45 Watts, LED luminaires 240 Volt, 50Hz, AC single phase complete all as specified and as directed by Engr-in-charge.
55
100
5500
... More
Supply and fix high energy efficient constant current electronic driver suitable for LED street light fitting 90 Watts, LED luminaires 240 Volt, 50Hz, AC single phase complete all as specified and as directed by Engr-in-charge.
50
100
5000
... More
Supply and fix high energy efficient constant current electronic driver suitable for LED street light fitting 100 Watts, LED luminaires 240 Volt, 50Hz, AC single phase complete all as specified and as directed by Engr-in-charge.
80
100
8000
... More
Supply and fix for high energy efficient constant current electronic driver suitable for LED flood light fitting 30 Watts, LED luminaires 240 Volt, 50Hz, AC single phase complete all as specified and as directed by Engr-in-charge.
35
100
3500
... More
Supply and fix high energy efficient constant current electronic driver suitable for LED flood light fitting 50 Watts, LED luminaires 240 Volt, 50Hz, AC single phase complete all as specified and as directed by Engr-in-charge.
50
100
5000
... More
Supply and fix high energy efficient constant current electronic driver suitable for LED flood light fitting 60 Watts, LED luminaires 240 Volt, 50Hz, AC single phase complete all as specified and as directed by Engr-in-charge.
35
100
3500
... More
Supply and fix high energy efficient constant current electronic driver 120 watt suitable for Golf area LED flood light fitting 2x100 Watts, LED luminaires 240 Volt, 50Hz, AC single phase complete all as specified and as directed by Engr-in-charge.
Make: Polycab Cat part No. PCLD C5 120W-01 or techno commercially equivalent in Philips/Bajaj/Havells
120
100
12000
... More
Supply and fix high energy efficient constant current electronic driver suitable for LED flood light fitting 200 Watts, LED luminaires 240 Volt, 50Hz, AC single phase complete all as specified and as directed by Engr-in-charge.
50
100
5000
... More
Material and labour for opening the LED street light/ flood light fittings of capacity 30 Watts to 60 Watts, any type and in any position, taking out the LED motherbaord, checking the power LED's, replacing the unserviceable motherboard, electronic driver, power LED's and soldering or any item as per requirement and making the light fittings serviceable in any way and fixing the fittings in same position including testing, complete all as specified and as directed by Engr-in-charge.
50
100
5000
... More
Material and labour for opening the LED street light/ flood light fittings of capacity 90 Watts to 200 Watts, any type and in any position, taking out the LED motherbaord, checking the power LED's, replacing the unserviceable motherboard, electronic driver, power LED's and soldering or any item as per requirement and making the light fittings serviceable in any way and fixing the fittings in same position including testing complete all as specified and as directed by Engr-in-charge.
45
100
4500
... More
Material and labour for dismantling the three phase motor upto 5 HP, 440 Volt, 50Hz, AC of high mast lights fittings and taking out to workshop for re-winding, removing the burntout windings, re-winding the same with super enamelled copper wire of existing guage, varnishing and oven drying and replacing any item as per requirement, assembling the motor including testing, making the motor serviceable in any way and fixing the motor in same position complete all as specified and as directed by Engr-in-charge.
10
100
1000
... More
Disconnecting and taking out old rusted/ unserviceable light fitting’s bracket including FI clamps of any description and in any position and supplying and fixing brackets made out of 50mm dia light grade GI pipe 1.50m long bent to shape and size as per site requirement for fixing of street light fitting on poles/ walls including Flat Iron clamps-02 Nos of size 30x5mm made to shape including nuts, bolts and washers complete all as specified and as directed by Engr-in-charge.
35
100
3500
... More
Disconnecting and taking out old rusted pipe and material and labour for 40mm dia galvanized iron tube light grade for cable protection, supporting to poles, plinth protections, road crossing, trenches, footpath etc., including Flat Iron clamps-02 Nos of size 30x5mm, with nut bolt and washers complete all as specified and as directed by Engr-in-charge.
25
100
2500
... More
Disconnecting and taking out old rusted pipe and material and labour for 50mm dia galvanized iron tube light grade for cable protection, supporting to poles, plinth protections, road crossing, trenches, footpath etc., including Flat Iron clamps-02 Nos of size 30x5mm, with nut bolt and washers complete all as specified and as directed by Engr-in-charge.
35
100
3500
... More
Disconnecting and taking out old existing unserviceable PVC cable loop box and supplying and fixing with pole PVC cable loop box, size not less than 200x140x95mm, outdoor type, IP 65 including 4 Nos aluminium bus bar of size 25x5mm mounted on porcelain insulators with one MCB SP 6 Amps 230 volts connected to street light fitting submain wire and using FI clamps of size 20x3mm for fixing of PVC cable loop box with pole, including nuts, bolts and washers and connecting the cables to bus bars with using suitable size GI nuts, bolts and washers and aluminium lugs etc., complete all as specified and as directed by Engr-in-charge.
60
100
6000
... More
Disconnecting and taking out old existing unserviceable PVC cable loop box and supplying and fixing with pole PVC cable loop box, size not less than 145x145x95mm, out door type, IP-65 including porcelain insulated connectors for incoming and outgoing 4 core cables with one MCB SP 6 Amps 230 volts connected to street light fitting sub main wire and using FI clamps of size 20x3mm for fixing of PVC cable loop box with pole, including nuts, bolts and washers and connecting the cables to connectors with using suitable size GI nuts, bolts and washers and aluminium lugs etc., complete all as specified and as directed by Engr-in-charge.
50
100
5000
... More
Material and labour for sub main wiring from street light fitting to junction box with two single core PVC insulated cable with copper conductor multistranded 1100 volts grade 1.5 sqmm in and including heavy grade PVC conduit and its accessories with fixing arrangements on pole surface, wall, ceiling etc., including 1.5 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and as directed by Engr-in-charge.
Note: One run of earth continuity conductor, one run of PVC conduit and two run of copper conductor together taken as one length for measuring unit length.
250
100
25000
... More
Supply and fix single core PVC insulated FR cable with multistranded copper conductor of size 2.5 sqmm cross sectional area 1100 Volts grade, fixed in repairs complete all as specified and as directed by Engr-in-charge.
200
100
20000
... More
Supply and fix in repairs MCB SP, 6-32A, 240V, 50Hz, 10kA, 'B' type, for street light fittings complete all as specified and as directed by Engr-in-charge.
40
100
4000
... More
Supply and fix in repairs MCB SPN 32A, 240V, 50Hz, 10kA, 'B' type, suitable for existing timer control board complete all as specified and as directed by Engr-in-charge.
30
100
3000
... More
Supply and fix in repairs MCB TPN, 63A, 415V, 50Hz, 10kA, 'B' type, suitable for existing timer control board complete all as specified and as directed by Engr-in-charge.
15
100
1500
... More
Supply and fix MCCB, 4 poles 415 Volts, 63 Amps, 16 kA, 50 Hz, AC, fixed thermal and fixed magnetic type including connecting up incoming/out going cables connection with suitable lugs and testing complete all as specified and as directed by Engr-in-charge.
10
100
1000
... More
Supply and fix 3 pole power contactors 415 volt 50 Hz ML3 type 40 Amps AC3 rating with 2 NO +2NC Aux contacts, fixed in repairs, including taking out old existing unserviceable complete all as specified and as directed by Engr-in-charge. Make : L&T Cat No. SS 90721 or equivalent in Legrand/ Schneider/ Havellls
15
100
1500
... More
Supply and fix 3 pole power contactors 415 volt 50 Hz ML 4 type 70 Amps AC3 rating with 2 NO+2NC Aux contacts, fixed in repairs, including taking out old existing unserviceable complete all as specified and as directed by Engr-in-charge.Make : L&T Cat No. SS 90910 or equivalent in Legrand/ Schneider/ Havellls
15
100
1500
... More
Supply and fix digital multi function time switch with programmable fuction with battery backup and current carrying capacity 16 Amps with 1 changeover including taking out the unserviceable time switch complete all as specified and as directed by Engr-in-charge.
10
100
1000
... More
Supply and fix street light panel box 32 Amps, 3 pole, 230 volts with contactor, digital time switch, 24 hours timer, MCB TPN etc., including taking out the unserviceable street light panel box complete all as specified and as directed by Engr-in-charge.
5
100
500
... More
Supply and fix LED flood light fitting 30 watts, 240 Volt, single phase, AC, outdoor type, aluminium pressure die-cast housing with IP66 protection with 4 KV in-built surge protection complete with driver, motherboard and LED including taking down unserviceable fitting, connecting and testing complete all as specified and as directed by Engr-in-charge.
Make: Bajaj cat part No. BJFL 30W LED or techno commercially equivalent in/Havells/Philips/Wipro
30
100
3000
... More
Supply and fix LED flood light fitting 50 watts, 240 Volt, single phase, AC, outdoor type, aluminium pressure die-cast housing with IP66 protection with 4 KV in-built surge protection complete with driver, motherboard and LED including taking down unserviceable fitting, connecting and testing complete all as specified and as directed by Engr-in-charge.
Make: Bajaj cat part No.BJFL 50W LED or techno commercially equivalent in/Havells /Philips /Wipro
30
100
3000
... More
Supply and fix LED flood light fitting 60 watts, 240 Volt, single phase, AC, outdoor type, aluminium pressure die-cast housing with IP66 protection with 4 KV in-built surge protection complete with driver, motherboard and LED including taking down unserviceable fitting, connecting and testing complete all as specified and as directed by Engr-in-charge.
Make: Havells cat part No.JETAALBAFLOODLIGHT60W or techno commercially equivalent in/ Philips /Wipro/Bajaj
20
100
2000
... More
Supply and fix LED flood light fitting 100 watts, 240 Volt, single phase, AC, outdoor type, with pressure die-cast housing, toughened glass with IP66 protection with 4 KV in-built and 10 KV external surge protection complete with driver, motherboard and LED including taking down unserviceable fitting, connecting and testing complete all as specified and as directed by Engr-in-charge.
Make: Bajaj cat part No.PRAZE F 120L WH NB-A5 TG SD or techno commercially equivalent in/ Havells /Philips /Wipro
44
100
4400
... More
Supply and fix LED flood light fitting 200 watts, 240 Volt, single phase, AC, outdoor type, with superior polycarbonate optics pressure die-cast housing, with IP66 protection with 4 Kv in-built and 10 Kv external surge protection complete with driver, motherboard and LED including taking down unserviceable fitting, connecting and testing complete all as specified and as directed by Engr-in-charge.
Make: Bajaj cat part No. GLEAM F 220L WH SY PC SD V2 or techno commercially equivalent in/ Havells /Philips /Wipro
40
100
4000
... More
Supply and fix LED street light fitting 35 watts, 240 Volt, single phase, AC, outdoor type with pressure die-cast housing with IP66 protection, high performance polycarbonate optics, 4 Kv in-built surge protection with top opening driver cover complete with driver, motherboard and LED including taking down unserviceable fitting, connecting and testing complete all as specified and as directed by Engr-in-charge.
Make: Bajaj cat part No.ENXT P 42L WH PO PC SD MT or techno commercially equivalent in/ Havells/ Philips/ Wipro
30
100
3000
... More
Supply and fix LED street light fitting 45 watts, 240 Volt, single phase, AC, outdoor type with pressure die-cast housing with IP66 protection, high performance polycarbonate optics, 4 Kv in-built surge protection with top opening driver cover complete with driver, motherboard and LED including taking down unserviceable fitting, connecting and testing complete all as specified and as directed by Engr-in-charge.
Make: Bajaj cat part No.ENXT P 54L WH PO PC SD MT or techno commercially equivalent in/ Havells /Philips /Wipro
31
100
3100
... More
Supply and fix LED street light fitting 90 watts, 240 Volt, single phase, AC, outdoor type with pressure die-cast housing, toughened glass with IP66 protection with 4 Kv in-built and 10 Kv external surge protection complete with driver, motherboard and LED including taking down unserviceable fitting, connecting and testing complete all as specified and as directed by Engr-in-charge.
Make: Bajaj cat part No. ZELA P 108 L WH PO TG SD or techno commercially equivalent in/ Havells /Philips /Wipro
40
100
4000
... More
Supply and fix LED street light fitting 100 watts, 240 Volt, single phase, AC, outdoor type with pressure die-cast housing, toughened glass with IP66 protection with 4 Kv in-built and 10 Kv external surge protection complete with driver, motherboard and LED including taking down unserviceable fitting, connecting and testing complete all as specified and as directed by Engr-in-charge.
Make: Bajaj cat part No. ZELA P 120 L WH PO TG SD or techno commercially equivalent in /Havells /Philips /Wipro
50
100
5000
... More
Supply and fix LED post-top light fitting 25 watts made in die-cast aluminium bottom housing and spun aluminium top reflector with decorative clear acrylic diffuser and IP 65 protection with 25 watt LED bulb including taking down unserviceable fitting complete all as specified and as directed by Engr-in-charge.
Make: Bajaj cat part No. BGCTN 25 W LED WH or techno commercially equivalent in /Havells/ Philips/ Wipro/ Crompton
40
100
4000
... More
Supply and fix for LED post-top light fitting 25 watts made in spherical shape polycarbonate opal and clear diffuser with IP 65/66 protection with 25 watt LED bulb including taking down unserviceable fitting complete all as specified and as directed by Engr-in-charge.
Make: Bajaj cat part No. BLPTSP 25 W WW LED or techno commercially equivalent in /Havells /Crompton/ Philips/ Wipro
40
100
4000
... More
Supply and fix for LED bulbs 23 Watts, BEE star rated energy efficient retrofit bulb, including taking down unserviceable lamp complete all as specified and as directed by Engr-in-charge.
144
100
14400
... More
Supply and fix for LED bulbs 10 watts, BEE star rated energy efficient retrofit bulb, including taking down unserviceable lamp complete all as specified and as directed by Engr-in-charge.
81
100
8100
... More
Excavation in trenches not exc 1.5m wide and not exc 1.5m deep and getting out in soft /loose soil complete all as specified and as directed by Engr-in-charge.
57
100
5700
... More
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cms thick in soft/ loose soil complete all as specified and as directed by Engr-in-charge.
34
100
3400
... More
Removing surplus soil to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and as directed by Engr-in-charge.
23
100
2300
... More
Material and labour for sand cushioning to under ground cable with locally available dry sand for protection of cable 8cm thick before laying of cable and 15 cm thick after laying and stretching the cable below the bricks/PCC cover, punning of sand using suitable T&P as per site requirement complete all as specified and as directed by Engr-in-charge.
Note: Punned thickness of sand i.e., 18 cm to be considered for measurement purpose.
17
100
1700
... More
Supplying and laying un-reinforced precast concrete cable cover class LV, Type 1, flat, size 250x150x40mm complete all as specified and as directed by Engr-in-charge.
1400
100
140000
... More
Material and labour for plain cement concrete 1:4:8 type D-2 (Using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete in foundation of poles and stay assembly for bed concrete or as per site requirement complete all as specified and as directed by Engr-in-charge.
1
100
100
... More
Taking out unserviceable cable any type/ size from trenches, pole, road, duct etc., including necessary joints, unserviceable fittings and pipes etc., complete all as specified and as directed by Engr-in-charge.
350
100
35000
... More
Supply and laying in trenches /laid in floor/ duct/ drawn through conduit XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable 1100 V grade with aluminium conductor of cross sectional area 10 sqmm 2 core complete all as specified and as directed by Engr-in-charge.
150
100
15000
... More
Supply and laying in trenches /laid in floor/ duct/ drawn through conduit XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable 1100 V grade with aluminium conductor of cross sectional area 10 sqmm 4 core complete all as specified and as directed by Engr-in-charge.
100
100
10000
... More
Supply and laying in trenches /laid in floor/ duct/ drawn through conduit XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable 1100 V grade with aluminium conductor of cross sectional area 16 sqmm 4 core complete all as specified and as directed by Engr-in-charge.
100
100
10000
... More
Supply and fix in repair copper flexible cable two core 2.5 sqmm PVC FRLS insulated and sheathed 1100 volts grade complete all as specified and as directed by Engr-in-charge.
200
100
20000
... More
Supply and fix in repair of copper flexible cable three core 2.5 sqmm PVC FRLS insulated and sheathed 1100 volts grade complete all as specified and as directed by Engr-in-charge.
250
100
25000
... More
Material and labour for taking up open well submersible motor dismantling and taking out old burnt winding, cleaning the slots and new rewinding of motor 10 HP, 3 phase, 415 volt with suitable gauge super enamelled copper winding wire and providing insulation materials such as fibre/ glass, complete including necessary transportation to work shop and bring back after repair/ rewinding complete all as specified and as directed by Engr-in-charge.
8
100
800
... More
All as per item No.56 here-in-before but submersible sewage pump set 7.50 HP.
6
100
600
... More
All as per item No.56 here-in-before but submersible sewage pump set 3.0 HP.
6
100
600
... More
All as per item No.56 here-in-before but submersible monoblock pump set 2.0 HP, 1 phase.
4
100
400
... More
All as per item No.56 here-in-before but monoblock pump set 0.5 HP, 1 phase.
4
100
400
... More
All as per item No.56 here-in-before but monoblock pump set 3.0 HP, 1 phase.
2
100
200
... More
All as per item No.56 here-in-before but motor 7.5 HP coupled with air blower.
3
100
300
... More
Supply and fix in repair flat 3 core PVC insulated, submerssible multistranded copper conductor cable of size 2.5 sqmm including necessary connections including taking out old unserviceable submersible connection cable complete all as specified and as directed by Engr-in-charge.
250
100
25000
... More
Supply and fix in repair flat 3 core PVC insulated, submerssible multistranded copper conductor cable of size 4 sqmm including necessary connections including taking out old unserviceable submersible connection cable complete all as specified and as directed by Engr-in-charge.
150
100
15000
... More
Material and labour for frame work such as grill, ladder/ chequrred plate and the like, using angle iron section for fabricating ladder of required size with steps including proper support angles, channels with building including two coats of water black bituminous paint and over one coat of red oxide and taking down old unserviceable grills, ladder etc., complete all as specified and as directed by Engr-in-charge.
230
100
23000
... More
Material and labour for one coat of anti-corrosive bituminous paint on old painted surfaces of steel ladder in UG/OH tanks complete all as specified and as directed by Engr-in-charge.
20
100
2000
... More
Supply and fix in repair water pressure guage 0-7 kg/sqcm including dismantling unserviceable exisitng pressure guage complete all as specified and as directed by Engr-in-charge.
6
100
600
... More
Supply and fix in repair 4" dia water pressure guage 0-14 kg/sqcm including dismantling unserviceable exisitng pressure guage complete all as specified and as directed by Engr-in-charge.
5
100
500
... More
Supply and fix in repairs single phase preventer suitable for any capacity upto 10 HP pump sets including dismantling and taking up old unserviceable complete all as specified and as directed by Engr-in-charge.
14
100
1400
... More
Supply and fix starter in repairs to spares MK1 relays of any range 0.6A to 18A including dismantling and taking up old unserviceable complete all as specified and as directed by Engr-in-charge.
12
100
1200
... More
All as per item No.70 here-in-before but starter spares MK1 combination coils of 230 /380 Volts.
9
100
900
... More
All as per item No.70 here-in-before but starter spares MK1 contactor coils of 230 /380 Volts.
7
100
700
... More
All as per item No.70 here-in-before but starter spares MK1 thermal timer with out combination coil.
8
100
800
... More
All as per item No.70 here-in-before but starter spares MK1 spare kit (4 set of contacts).
6
100
600
... More
Supply and fix in repairs to MNX 10 contactor (L&T), 3 pole, including dismantling and taking up old unserviceable complete all as specified and as directed by Engr-in-charge.
6
100
600
... More
Supply and fix in repairs MCCB, 4 pole, 160 Amps, adjustable type with 36 KA breaking capacity including dismantling of unserviceable MCCB, making electrical connections as required and testing complete all as specified and as directed by Engr-in-charge.
5
100
500
... More
Supply and fix in repair fine bubble membrane diffuser of 0.6m long and 90mm outer dia including lifting and lowering consisting of EPDM membranes with PVC grid pipes, supporting CC blocks to fix the fine bubble membranes including tee, hose nipple, collar, U clamps and teflon tape complete all as specified and as directed by Engr-in-charge.
5
100
500
... More
Supply and fix in repairs coarse bubble diffusers of size 0.5m long and 90mm outer dia including lifting and lowering supported by PVC pipe and fittings with CC ballast and SS clamps, nuts, bolts, washer etc., as required complete all as specified and as directed by Engr-in-charge.
6
100
600
... More
Supply and fix in repair butterfly valves of 50mm dia in presure filter header lines or air blower delivery system complete all as specified and as directed by Engr-in-charge.
5
100
500
... More
Supply and fix in repair butter fly valves of 65mm dia in presure header lines or air blower delivery system complete all as specified and as directed by Engr-in-charge.
4
100
400
... More
Material and labour for servicing of air blowers, with greasing of ball bearings, oil seals and O rings and replacement of gear oil, 2 Nos belt as existing make suitable for air blower motor and air filters and spray painting with approved/ existing colour complete all as specified and as directed by Engr-in-charge.
2
100
200
... More
Material and labour for opening the pressure sand filter of capacity 35000 ltr/Hr, opening the top cover of filter and removing old used filter media complete including cleaning of internal surfaces of filter for rusting and other accumalated deposists by scrubbing with wire bursh to smooth surface complete all as specified and as directed by Engr-in-charge.
Note: In case the desired water quality parameters are not achieved the contractor shall arrange/alter the strata to ensure the quality parameters without any extra cost.
10
100
1000
... More
Supply only new fresh media for pressure sand filter as per the approved sample any size for top up of lost sand media in pressure filter/ drying beds at STP plant complete all as specified and as directed by Engr-in-charge.
2650
100
265000
... More
Disconnecting electrical and water connections and cleaning fountain and water storage tank, removing deposited algae, servicing and refixing at the same position complete all as specified and as directed by Engr-in-charge.
10
100
1000
... More
Supply and fix in repair shower nozzles 2.5mm size for fountain any location complete all as specified and as directed by Engr-in-charge.
80
100
8000
... More
Dismantling and removing unserviceable multi colour changing water proofing light fittings and fixing with new light fitting and making necessary connections, testing complete all as specified and as directed by Engr-in-charge.
35
100
3500
... More
Material and labour for opening the pressure sand filter at swimming pool of capacity 120000 ltrs/Hr, opening the top cover of filter and removing old used filter media includes various sizes of pebbles/ fine and coarse sand complete to place near by not exc 15m. Cleaning of internal surfaces of filter for rusting and other accumalated deposists by scrubbing with wire bursh to smooth surface complete all as specified and as directed by Engr-in-charge.
2
100
200
... More
Supply and filling new fresh gravels/ pebbles for pressure sand filter at swimming pool as per the existing strata shown below including testing and commissioning and obtaining desired out put water quality parameters by testing at NABL approved laboratory as per the instruction and satisfactory complete all as specified and as directed by Engr-in-charge.
(a) 25 to 50mm size pebbles from bottom - 10 cm depth
(b) 12 to 25mm size pebbles-7.5 cm depth
(c) 6 to 12mm size pebbles-7.5 cm depth
(d) 3 to 6mm size pebbles (Silex)-7.5 cm depth
(e) 1.5 to 3mm size coarse sand-10 cm depth
(f) 0.7 to 1.5mm size fine sand-37.5 cm depth
Note: In case the desired water quality parameters are not achieved the contractor shall arrange/alter the strata to ensure the quality parameters without any extra cost.
2700
100
270000
... More
Supply and fix in repairs to suction sweeper with brush holder made out of MS sheet 2mm thick suitable for fixing 2 feet nylon brush and provided with 4 nos moulded wheels of size 25mm dia on four corners of brush holder including providing rubber gasket of size 3mm thick all round the brush holder box fixed with suitable nuts, bolts, washers of GI and suitable handle for lifting /inserting the sweeper complete all as specified and as directed by Engr-in-charge.
2
100
200
... More
Supply and fix in repairs PVC heavy duty braided hose 50mm dia with suitable clamps/circlips for suction sweeper complete all as specified and as directed by Engr-in-charge.
60
100
6000
... More
Supply and fix in repair butter fly valve 150mm dia heavy duty with rubber gasket complete all as specified and as directed by Engr-in-charge.
2
100
200
... More
Supply and fix in repair butter fly valve 100mm dia heavy duty with rubber gasket complete all as specified and as directed by Engr-in-charge.
2
100
200
... More
Supply and fix in repair butter fly valve 80mm dia heavy duty with rubber gasket complete all as specified and as directed by Engr-in-charge.
1
100
100
... More
Supply and fix in repair fully automatic star/delta starter in sheet steel enclosure suitable for 10 HP, 3 phase, 415 volts, 50HZ, AC complete including dismantling existing old starter form its position complete all as specified and as directed by Engr-in-charge.
6
100
600
... More
Supply and fix in repairs UPVC pipes 75mm dia in trenches, with all fittings complete in old/new location complete all as specified and as directed by Engr-in-charge.
37
100
3700
... More
Supply and fix in repair ball bearing for air blower motor of capacity 7.5 HP complete all as specified and as directed by Engr-in-charge.
12
100
1200
... More
Supply and fix in repair 'O' ring for air blowers motor complete all as specified and as directed by Engr-in-charge.
10
100
1000
... More
Supply and fix in repair NDE/DE bearings suitable for 10 HP motor pump set complete all as specified and as directed by Engr-in-charge.
10
100
1000
... More
Supply and fix in repair NDE/DE bearings suitable for 3/2 HP motor pump set complete all as specified and as directed by Engr-in-charge.
10
100
1000
... More
Supply and fix in repair non return valve, heavy duty, PN –1.6, both end flanged, suitable to fix with 100mm bore pipe line including taking down existing unserviceable non return valve complete all as specified and as directed by Engr-in-charge.
2
100
200
... More
Supply and fix in repair voltmeter 0-500 volts, square type 96x96mm or digital type as per site requirement, connecting the cable complete all as specified and as directed by Engr-in-charge.
6
100
600
... More
Supply and fix in repair ampere meter 0-100 Amps square type 96x96mm or digital type as per site requirement, connecting the cable complete all as specified and as directed by Engr-in-charge.
6
100
600
... More
Supply and fix in repair selector switch for selection of current /voltage including dismantling of unserviceable selector switch, connecting the cable complete all as specified and as directed by Engr-in-charge.
6
100
600
... More
Supply and fix in repair LED indication lamp R/Y/B (each set of three) with base including dismantling of unserviceable indication lamp and connecting up the cables complete all as specified and as directed by Engr-in-charge.
12
100
1200
... More
Supply and fix in repair DOL starter for the motors of capacity of 3/2 HP including dismantling existing old motor starter from its location by removing all cable connections complete all as specified and as directed by Engr-in-charge.
12
100
1200
... More
Material and labour for cleaning the swimming pool of capacity 1000000 ltrs thrice in a week all around and bottom of the pool to remove the algae by means of scrpping/ scrabbing the wall with wire brush removing the sediments deposited at bottom with the help of suction sweeper complete all as specified and as directed by Engr-in-charge.
360
100
36000
... More
De-watering of swimming pool, including fountain, sucttion drainage carefully removing all moses, algae and dirt from internal walls, floors under ground sump by using steel wire brush and cleaning with high pressure industrial vaccum cleaner including removing of dirty water completely using sludge pump set and disposing off the same to a safe distance and applying of antibacterial sterilization spray to internal surfaces using zero bacterial compound (Aqua-treat) or equivalent approved chemical including writing the date of cleaning on outside of tank/ sump using synthetic enamel paint of white colour over black background with letters of size 100mm height x 100mm wide for 950000 ltrs capacities (swimming pool) of tanks/ sumps complete all as specified and as directed by Engr-in-charge.
1
100
100
... More
Supply and fix in repair flexible PVC braided pipe, heavy duty, 40mm dia with circlips/ clamps suitable for suction sweeper complete all as specified and as directed by Engr-in-charge.
285
100
28500
... More
Supply and fix in repair flexible PVC braided pipe, heavy duty, 25mm dia with circlips/ clamps suitable for suction sweeper complete all as specified and as directed by Engr-in-charge.
260
100
26000
... More
Supply and fix for nylon rope heavy duty (manila type) of size 25mm dia complete all as specified and as directed by Engr-in-charge.
130
100
13000
... More
Supply and fix in repair nylon brush suitable for suction sweeper, 2 feet x 2 inch size with necessary nuts, bolts, washers etc., including removing unserviceable brush complete all as specified and as directed by Engr-in-charge.
10
100
1000
... More
Supply anf fix in repair rubber gasket suitable for suction sweeper including MS flat strip support, bolts, nuts and washers complete all as specified and as directed by Engr-in-charge.
8
100
800
... More
Supply and fix in repair gunmetal, globe or gate valves, heavy duty, with iron wheel head, screwed both ends (ISI marked) of size 15mm including taking down complete all as specified and as directed by Engr-in-charge.
14
100
1400
... More
Supply and fix in repairs foot valve, in UG sump 100mm bore, CI body and hard rubber gasket complete all as specified and as directed by Engr-in-charge.
4
100
400
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%