Mangalore Electricity Supply Company Limited Tender

NONSR04 - Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge Orissa pattern W.C Pan of size 580x440 mm

NONSR05 - Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete. (internal work exposed on wall) - 25mm nominal OD pipes

NONSR06 - Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, HOM of machineries complete as per specifications.

NONSR07 - Providing door window and watersupply fixtures

NONSR08 - Labour Charges for Skilled Carpenter Class-I

NONSR09 - Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. 35 mm thick both side Teak (KPWD SR Vol-2 2023-24/P.No.105/12.57.4) Basic Rate= 4532.00

NONSR10 - Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete.

NONSR11 - Providing and fixing 100mm wide venitian blinds of window fashion fabric of Taiwan make, with 50mm thick powder coated channel with balance, imported, acrylic self alignable mechanism and equally placed spacers, imported tilting mechanism for easy tilting operation, with nylon imported tread and beadings, 100mm wide imported washable reusable fabric placed with top hanger and bottom with 100mm long bottom plate connected to nylon imported bottom link chain. The rate is inclusive of drilling holes for fixing channels to the wall, fixing threads and beadings and link chains, hard ware fixtures etc., complete as per drawing, specifications.

NONSR12 - Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For Fixed Portion: Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications.

NONSR13 - Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12 823 Grade l Type ll, in anelling fixed in aluminum doors, windowss hutters and partition frames with C.P. brass/stainless steel screws etc.complete a per architectural drawings and directions of engineer-incharge: Pre-laminated particle board with decorative lamination on onesid e and balancing lamination on oth er side including cost of materials,labour, usage charges of machinery complete as per specifications

NONSR14 - Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/m²) including cost of materials, labour, usage charges of machinery complete as per specifications.KPWD SR Vol-2 2023-24/P.No. 89/11.37.1) Basic Rate= 988.00

NONSR15 - Wiriting of Name Board to the Sub-Division office including paint and Labour charges

NONSR16 - Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc.150mm

NONSR17 - Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form stiles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the stiles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm Aluminium hinges (I.no. 12.53 P.no 104)

NONSR18 - Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance P OR M 1mm), with wall thickness 2.0 mm (P OR M 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (P OR M 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer in charge (42*50mm pvc extruded section)

NONSR19 - Cleaning of Toilets rooms wall tiles and floor by using brushes and also make acid wash complete including labour and material charges

NONSR20 - Cleaning of terrace/loft water storage tank (inside surface area) uptom2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with freshwater disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own costand nothing extra will be paid on this account)

NONSR21 - Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.white

NONSR22 - Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

NONSR23 - Providing and fixing brass stop cock of approved quality : 20 mm nominal bore

NONSR24 - Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore

NONSR25 - Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively

NONSR26 - Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover..

NONSR27 - Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

NONSR28 - Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g.

NONSR29 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) M20 Using 20 mm nominal size graded crushed coarse aggregates.

NONSR30 - Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

NONSR31 - Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter

NONSR32 - open conduit system : Supplying heavy gauge PVC conduit pipe 25dia 2mm thick confirming to IS 2509 with suitable size bends, junctionboxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws

NONSR33 - Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm .... etc. as required.

NONSR34 - Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.. Short point upto 3 mtrs from tapping point to out let via switch. using class A materials

NONSR35 - Medium point above 3 mtrs up to 6 mtrs from tapping point to out let via switch box, using class A materials

NONSR36 - Long point above 6M upto 10mtr from tapping point to out let via switch box,using class A materials

NONSR37 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistnce single core wire in open or concealed system of wiring as per IS-694:1990 & confirming to GTP of GROUP-A.1.5 sqmm

NONSR38 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistnce single core wire in open or concealed system of wiring as per IS-694:1990 & confirming to GTP of GROUP-A.2.5 sqmm

NONSR39 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistnce single core wire in open or concealed system of wiring as per IS-694:1990 & confirming to GTP of GROUP-A.4 sqmm

NONSR40 - Supplying and fixing of modular switch/socket/stepped electronic fan regulator/ dimmer/ telephone socket etc on existing modular switch plate Is 3854 and IS 1293 using Group A materials 6Amps 3way socket

NONSR41 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6Amps one way Switch

NONSR42 - Supplying and fixing of modular switch/socket/stepped electronic fan regulator/ dimmer/ telephone socket etc on existing modular switch plate Is 3854 and IS 1293 using Group A materials Stepped fan regulator

NONSR43 - Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A Lamp Holder Group A

NONSR44 - Supplying wall mounting fan suitable to operate at single- phase 230v AC. Supply 400 mm Swee)

NONSR45 - Fixing a ceiling/wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together supplying and fixing a 5 amps ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring.

NONSR46 - Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70 PER lumen maintenance with CRI G.T 80. Power Input: 220-240V@ 50/60Hz & Power factor GT 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4'- 20/22w

NONSR47 - Fixing all types and all capacities fluorescent /false ceiling/spot light/CFL/LED fittings indoor on the wall / ceiling / rafters / girders using 23 / 0.00076 " twin twisted PVC insulated wires, required nos of round blocks and clamps. (Using neccesary length of GI Chair)

NONSR48 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and wiring complete as required. Group A , 6 to 32 amps Double pole

NONSR49 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Two way switch

NONSR50 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 3 Moduler

NONSR51 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4Moduler

NONSR52 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Moduler

NONSR53 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12Moduler

NONSR54 - Supplying , fixing, and wiring earth electrode for grounding condits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90 mm thick GI pipe 2.5 mtr long boried in a pit. The pit should be filled with equal proportion of salt and charcoal 150mm alround the pipe to complete pepth. The connection from the pipe to the conduit etc. is to be established through GI wire of size as per ISI specification 7.3.3 of IS 732 using 12mm dia bolts, nuts, washers and checknuts etc. the pipe shall have 16 through holes of 12mm dia.

NONSR55 - Supply of LED Streetlight with pressure die cast aluminium housing body with optimal heat sink for better thermal dissipation. Diffuser with injection moulded & is made of polycarbonate material with high transmission index, delivering superior light output. Rated life burning Hrs 50000 Hr @ Lumen maintenance of 70 PER . CCT GT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminare GT lK08. Power Factor GT 0.9 with mains current should not be greater than 0.1A to 0.74 & Surge Protection Min 4KV along with over voltage/Overload, short circuit/ miswiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal voltage driver to operate wide voltage range from 100V to 270V 50/ 60Hz application. Over load & Short circuit protection ensures reliable operation in spite of problem in output side. Compliance to IS 10322/IEC 60598,LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the site location with minimized tools. LED Light fixture with ........W system power consuption. LED efficiency GT 130lm/w at 1W & Fixture efficiency GT 80lm/w with nominal CRI GT 75. Luminarie manufacturer should have in house facility accredited by NABL/CPRI & any government certified agency & Design & Development facility certified by ISO 9001 : 2008. Housing with supplier word mark/name shall be engraved/Embossing on the die cast housing/ body part. Warranty of 5 years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED source manufature. Suitable for B1/B2 roads as per IS 1994 Part I and Part II ...LED Street Light 700Watts.

NONSR56 - Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply.

NONSR57 - Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire.

NONSR58 - Supplying and fixing one of 230 V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with .Ding Dong Bell