Kuvempu University Tender

Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth complete with all lead, lifts, loading unloading, transportation, labour, hire charges of machinery, cost and convene of all material, and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer - in –charge of this work.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth complete with all lead, lifts, loading unloading, transportation, labour, hire charges of machinery, cost and convene of all material, and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer - in –charge of this work.

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete with all lead, lifts, loading unloading, transportation, labour, hire charges of machinery, cost and convene of all material, and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer - in –charge of this work.

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.do- with one side prelam complete with all lead, lifts, loading unloading, transportation, labour, hire charges of machinery, cost and convene of all material, and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer - in –charge of this work.

Providing and fixing CI Nahani trap of size 12.5cms X 7.5cms approved make conforming to ISI Specifications and construction of cistern in M15 as per directions without scaffolding ( Rate is inclusive of cost materials and fixtures and conveyance of materials to work spot) complete with all lead, lifts, loading unloading, transportation, labour, hire charges of machinery, cost and convene of all material, and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer - in –charge of this work.

Providing and fixing 7.5 cms to 15.00 cms dia NP grating 100 mm dia complete with all lead, lifts, loading unloading, transportation, labour, hire charges of machinery, cost and convene of all material, and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer - in –charge of this work.

Providing and fixing Chorinated Poly Venyl Choride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPCV solvent cement and the cost of cutting chases & making good the same including testing of joints complete.(concealed work including cutting chases and good the walls etc.,) 20 mm nominal OD pipes complete with all lead, lifts, loading unloading, transportation, labour, hire charges of machinery, cost and convene of all material, and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer - in –charge of this work.

Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM of equipments and testing complete as per specifications. (For 1000 litre capacity) complete with all lead, lifts, loading unloading, transportation, labour, hire charges of machinery, cost and convene of all material, and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer - in –charge of this work.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps complete with all lead, lifts, loading unloading, transportation, labour, hire charges of machinery, cost and convene of all material, and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer - in –charge of this work.

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for:PVC pipes 75mm dia., 6 kg/sqcm & class 3 complete with all lead, lifts, loading unloading, transportation, labour, hire charges of machinery, cost and convene of all material, and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer - in –charge of this work.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete with all lead, lifts, loading unloading, transportation, labour, hire charges of machinery, cost and convene of all material, and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer - in –charge of this work.

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 g complete with all lead, lifts, loading unloading, transportation, labour, hire charges of machinery, cost and convene of all material, and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer - in –charge of this work.