Krishna Bhagya Jala Nigam Limited Tender

I04 - Supply of Gear oil of approved quality For Department Store for radicon units of spillway gates/cranes including cost of transportation etc., complete with all leads and lifts and as per Directions of Engineer-in-Charge. (HP/SERVO)

I05 - Providing and applying cardium compound of approved quality to wire ropes of hoists / gantry cranes as part of the annual maintenance including cost of all materials, machinery, labour etc., complete with all leads and lifts & as per Directions of Engineer-in -charge

I06 - Supply of cardium compound of approved quality For Department Store including cost of transportation etc., complete with all leads and lifts and as per Directions of Engineer-in-Charge. (HP/SERVO)

I07 - Supplying, installation, testing & commissioning of 12V 120 AH batteries in poly propylene container for D.G. sets. Low maintenance batteries, plate type. as per Directions of Engineer-in -charge

I08 - Supplying, installation, testing & commissioning of 12V 150 AH batteries in poly propylene container for D.G. sets. Low maintenance batteries, plate type as per Directions of Engineer-in -charge

I09 - Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires as per Directions of Engineer-in -charge

I10 - Supply of round/square recess/surface mounted rolling type LED Down light with 15-18 W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V @50/60Hz & Power factor greater than 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition as per Directions of Engineer-in -charge

I11 - Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT greater than 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire greater than IK08. Power Factor greater than 0.9 with mains, Surge Protection- Min 5KV Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with 120 W System Power consumption. LED Efficiency greater than 1301m/w, nominal CRI greater than 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. . Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned (Make: Havells/Philips) as per directions of Engineer-in-charge

I12 - Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and virgin grade PVC insulation and powder coating extruded PVC sheathed suitable for working voltage upto 1100 V as per IS-694:2010. 3C x 10 mm2

I13 - Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 40 Amps (L&T) as per directions of Engineer-in-charge

I14 - Providing and applying two coats of first quality synthetic enemel paint of approved colour to hoist supporting structures / hoists / moving gantry cranes / railings etc., including cost of all materials, labour, cleaning surface, scaffolding etc., complete with all leads and all lift and As per directions of Engineer-in-Charge

I15 - Design, fabrication, supply, erection and commissioning of embedded parts consisting of sill beam, wall plates, seal seats, anchors, anchor girders, yoke girders,tie flats, trunnion supports,rope and pulley supports etc., with all accessories for spillway radial gates including cost of all materials, machinery,labour, cutting,aligning,anchoring, welding,finishing, cleaning, applying one coat of zinc rich epoxy primer and four coats of cold appliedcoal tar epoxy paint etc., complete as per specifications and approved drawings with lead and all leads and lifts including packing / forwarding charges for other materials as per directions of Engineer-in-charge

I16 - Providing, supplying to work site,Single Phase Submersible Pump 2.00 HP/1.5KW, 6 STG Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications,with testing etc., complete with all leads and lifts and as per Directions of Engineer-in-Charge of work and latest amendments.(Make: Kirloskar/Crompton)

I17 - Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and virgin grade PVC insulation and powder coating extruded PVC sheathed suitable for working voltage upto 1100 V as per IS-694:2010. 3C x 2.5 mm2