Krishna Bhagya Jala Nigam Limited Tender

code04 - Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness. complete as per specifications as directed by Engineer-In-Charge By Manual Means - In area of light jungle with all lead and lifts.

code05 - Supply of LED floodlight luminaire with pressure die cast aluminum housing body for optimal thermal dissipation Lamp compartment comprising of anti glare clear diffuser with Injection molded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs. 50000 hr. Lumen Maintenance of 70%, CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage Overload, short circuit miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with 150 W System Power consumption. LED Efficiency 1301m/w, nominal CRI 75. Luminaire manufacturer should have in- house facility accredited by NABL / CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark / name shall be Engraved / Embossing on the die cast housing / Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. complete as per specifications as directed by Engineer-In-Charge -150w with all lead and lifts.

code06 - Engaging un skilled category Watchman for watch and ward of Barrage complete as per specifications as directed by Engineer In Charge with all lead and lifts.

code07 - Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947 complete as per specifications as directed by Engineer-In-Charge with all lead and lifts.

code08 - Providing and constructing dry rubble stone pitching with pin headers at 2 per m2 using stones and stone chips from approved source including cost of all materials, labour, hand packing / wedging stone chips, finishing and all other ancillary operations complete. complete as per specifications as directed by Engineer-In-Charge 300MM THICKNESS.with all lead and lifts.

code09 - Providing and laying insitu vibrated M-10 grade cement concrete using 40 mm down approved, clean, hard, graded aggregatescrushed from tunnel excavated rock for filling and levelling over-cuts in bed due to geological faults etc., including cost of all materials, machinery, labour, ventilation, lighting, drainage, cleaning bed, batching and mixing concrete, conveying upto placing point in agitator car, placing in position, levelling, compacting, finishing, curing, and all other ancillary operations complete as per pecifications as directed by Engineer-In-Charge. with all lead and lifts.

code10 - Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, including cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, centering, formwork and scafolding and all other appurtenances required to complete the work as per technical specifications for check dam /pickups /irrigation tanks/waste weir/ sluice, sluice canal and other allied works like abutments/wing walls/returns/cutoff walls works & all necessary works and complete as per specifications as directed by Engineer-In-Charge.with all lead and lifts.

code11 - Providing, fabricating and placing in position steel reinforcement bars for RCC structures including cost of all materials machinery, labour, cleaning, straightening, cutting, bending, hooking, lapping / welding joints wherever required, tying with 1.25 mm diameter soft annealed steel wire and all other ancillary operations-Dam & Allied Works complete as per specifications as directed by Engineer-In-Charge.with all lead and lifts.