Krishna Bhagya Jala Nigam Limited Tender

code04 - Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.

code05 - Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

code06 - Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge.

code07 - Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

code08 - Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 15 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 409 PCC M15 grade for kerb base

code09 - Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete.

code10 - Scarifying Existing Granular Surface to a Depth of 50 mm by Manual Means

code11 - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.

code12 - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanical means. Prime Coat over WMM/WBM

code13 - Providing and laying Bituminous Macadam with 40/60 tph capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 at 3.3% by weight of mix, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction Bituminous Macadam Grading - I for traffic less than 20 MSA

code14 - Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight of mix and filler, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per MoRTH V revision.

code15 - Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35:2015.The finished surface to be level, uniform and free from streaks and holes.

code16 - Fabrication, Supplying, Erection, Testingand Commissioning of .... m slong Polygon high mast with Single /Multiple telescopic sections having ,(minimum over lap distance of1.5times of top section) thickness aspe r BSEN10025 grades 355JO/ASTMA572-50steel sheet plate forshaftsuitable towithstand a wind velocityof 47m/sasper IS875 part3 (asperGADrawing) . Base plate as per IS2062/ASTMA572-50. The mast shall be Galvanizedinsingle Hot-dipasper BSENISO1461/ASTMA 123 withan average 70micron sasper IS2629, and welde dasper BS5135 SingleL-Seamjoint The mast shall have 2 Way head frame with diecast LM-6pulleys, stainlesssteelaxle, Phosphorus Bronze bearing bush press-fittedwithseparate guidesfor 2runs of 5mmdia, stainlesssteel wire rope of AISI304grade 7/19 -core, (Factor ofSafetyasperTRno-7).2.5mm2EPR insulatedPCP sheathedt railing powercable house dinside the bottomshaf to fmast withdoor havinglock ingarrangement Themastshallhavemanual /powertool(Suitablereversiblegeare dmotoroperatingon230/415V,50Hz, shallbeprovideabove15Mtrmast) Themastshallhavelanternof2 segments,suitablediawithmax loadcarryingcapacityasperIS1239. Themastshallbeerectedonexisting RCCfooting. Themast shall besupplied with3mmthicktemplate, lightningarresterof1 .2mlengthgalvanized pipewithtoparrow fittedontop of the headframe coverandGLS type aviation twin lA fittingwith wiring complete.(excluding foundation) as per technical data. 12 m/12.5 m - Top 100 mm and Bottom 310 mm dia

code17 - Supply of LED flood light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polycarbonate /clearglass material,d eliveringsuperior lightoutput Rated life Burning Hrs 50000hr AT Lumen Maintenanceof70PECENT, CCT GREATER THAN 5500K, IP66opticaland electricalcompartment AND impactresistance ofcomplete luminair e GREATER THAN IK08.PowerFactor GREATER THAN0.9withmains,SurgeProtection-Min5KValong with Overvoltage /Overload, shortcircuit /miss-wiringprotection. Compatible for pole mauling with outerdia of 40mm to 50mm. UniversalVoltagedrivertooperatewidevoltagerangefrom100Vto270V50/60Hzapplication.CompliancetoIS10322/IEC60598,LM79 AND LM80AdherencewithRoHS.ULapprovedMCPCB.Topaccessstreetlightwithsinglescrewtoensureeaseofmaintenanceatthesightsitelocationwithminimizedminimaltools.LEDLightfixturewith.......WSystemPowerconsumption.LEDEfficiency GREATER THAN 1301m/w,nominalCRI GREATER THAN 75.Luminairemanufacturershouldhavein-housefacilityaccreditedbyNABL/CPRI&anyGovernmentcertifiedagency&Design&DevelopmentfacilitycertifiedbyISO9001:2008.Housingwithsupplierwordmark/nameshallbeEngraved/Embossingonthediecasthousing/BodypartWarrantyof2YearsagainstanymanufacturingdefectworkingunderstandardelectricalconditionsasmentionedaboveshouldbegivenbyLEDmanufacturer&Cree/Nichia/Lumileds/Osrammake LED Source. LED Floodlight 120W

code18 - Supplying & fixing retro fittype -PL-Lamp.18-20W LED linear source with CCT6500 degree K,CRI GREATER THAN 70 PERCENTAGE . efficacy GREATER THAN 80 lumenper W,life GREATER THAN25000 burning hour sand Compliance toIS10322/IEC60598,LM79&LM80. TheLEDaredrivenbyHFelectronicdriverintegratedinthesystem,withPF GREATER THAN 0.95,powerlossshould LESS THAN 5 PERCENTAGE oflampWage.,shortcircuit&opencircuitprotectiontobeintegratedinthecircuit,THDlessthan20 PERCENTAGE ,LifeasperLM79.Theoperatinginputvoltage should be between 130to275V. TestedbyNABL /CPRIaccredited laboratorywith2years Warranty againstany manufacturing defect working under standard electrical condition. led- 18-20 W

code19 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper withlowconductorconfirmingtoIS8130-1984and(Virgin)PVCinsulationsheathedsuitableforworking voltage upto 1100 Volts as per IS-694:1990 3C x 2.5 mm2

code20 - Supply of LED Street lightluminaire with pressure diecast aluminium housing body for optimalthermal dissipation .Lamp compartment comprising of antiglare clear diffuser with Injection moulded polycarbonatematerial, deliveringsuperio rlightoutput Ratedlife Burning Hrs50000hr @ Lumen Maintenance of70 % ,maximum lightintensity shouldbebetween 60degreesto70degrees. CCT GREATER THAN 5500K,IP66 opticalandelectrical compartment &impactresistance of completeluminaire greaterthan IK08. PowerFactor greater than 0.9withmains,SurgeProtection-Min5KValong withOvervoltage/Overload, shortcircuit/miss-wiringprotection. Compatibleforpolemountingwith outerdiaof40mmto50mm. UniversalVoltagedrivertooperatewidevoltagerangefrom100Vto270V50/60Hz application.Compliance toIS10322/IEC60598,LM79&LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with singlescrewtoensureeaseofmaintenanceatthesightsite locationwithminimizedminimaltools. LEDLightfixturewith....... .WSystemPowerconsumption .LEDEfficiency greaterthan1301m/w, nominalCRIgreaterthan 75.Luminairemanufacturershouldhavein-housefacilityaccreditedbyNABL/CPRI&any Governmentcertifiedagency&Design&DevelopmentfacilitycertifiedbyISO9001:2008.Housingwithsupplierwordmark/nameshallbeEngraved/Embossingonthediecasthousing/Bodypart.Warrantyof2YearsagainstanymanufacturingdefectworkingunderstandardelectricalconditionsasmentionedaboveshouldbegivenbyLEDmanufacturer&Cree/Nichia/Lumileds/Osram make LED Source. LED Streetlight 25W

code21 - Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work site, rolling and lowering into trenches, laying true to line and level including loading and unloading at both destinations and jointing of pipes and specials, perfect linking of joints with jack to correct position including cost of jointing materials, i.e, rubber rings conforming to IS: 5382 for S&S RCC pipes, with all leads and lifts as directed and giving necessary hydraulic test as per ISS to the required pressure and commissioning etc. complete. (Contractor will make his own arrangements for procuring water for testing). Before the execution of the work, the contractor shall carry out the survey. RCC NP3 Class pipe of 300 mm dia

code22 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings